Professional Documents
Culture Documents
Bureau Veritas Test Report MP Wire Ropes 2.0
Bureau Veritas Test Report MP Wire Ropes 2.0
Inspection performed on: 15th May 2019 Next Inspection (If applicable): NA
( Date(s) ) (Date)
A – INSPECTION RESULT
This template is intended exclusively when BV is acting as 3° party inspection body. The use of present template is
forbidden in the frame of 2° party services where Client specification and templates must be used.
Industry & Facilities Division
Third Party Inspection Report
Page 2 of 7
Wire Ropes are in compliance with UNI EN 12385-5, ISO 4344 and SASO ISO 4344
The load tests have been performed with satisfactory results.
B - REFERENCE DOCUMENTATION:
Refer to attachment section J instead
(Indicate if separate document list is provided in attachment)
Approval
Title Reference n° Rev. Approved by Date
status
Inspection Certificate 3.1, and Tensile MP WIRE
01/2019 0 As Final 15/05/2019
Test Ø6 ROPES
Inspection Certificate 3.1, and Tensile MP WIRE
02/2019 0 As Final 15/05/2019
Test Ø8 ROPES
Inspection Certificate 3.1, and Tensile MP WIRE
03/2019 0 As Final 15/05/2019
Test Ø9 ROPES
Inspection Certificate 3.1, and Tensile MP WIRE
04/2019 0 As Final 15/05/2019
Test Ø10 ROPES
Inspection Certificate 3.1, and Tensile MP WIRE
05/2019 0 As Final 15/05/2019
Test Ø11 ROPES
Inspection Certificate 3.1, and Tensile MP WIRE
06/2019 0 As Final 15/05/2019
Test Ø12 ROPES
Inspection Certificate 3.1, and Tensile MP WIRE
07/2019 0 As Final 15/05/2019
Test Ø13 ROPES
Inspection Certificate 3.1, and Tensile MP WIRE
08/2019 0 As Final 15/05/2019
Test Ø6,5 ROPES
Inspection Certificate 3.1, and Tensile MP WIRE
09/2019 0 As Final 15/05/2019
Test Ø8 ROPES
ISO 9001:2015 Certificate IT286500 0 As Final Bureau Veritas 22/11/2018
C – ATTENDEES
This template is intended exclusively when BV is The use of present template is forbidden in the
acting as 3° party inspection body. BV STAMP frame of 2° party services where Client
specification and templates must be used.
Industry & Facilities Division
Third Party Inspection Report
Page 3 of 7
E - INSPECTION DETAILS
Details of tests:
This template is intended exclusively when BV is The use of present template is forbidden in the
acting as 3° party inspection body. BV STAMP frame of 2° party services where Client
specification and templates must be used.
Industry & Facilities Division
Third Party Inspection Report
Page 4 of 7
This template is intended exclusively when BV is The use of present template is forbidden in the
acting as 3° party inspection body. BV STAMP frame of 2° party services where Client
specification and templates must be used.
Industry & Facilities Division
Third Party Inspection Report
Page 5 of 7
During the inspection, no operations were found that conflict with the principles of HSE.
G- NON CONFORMITIES
Refer to attachment section J instead
(Indicate if separate punch list is provided in attachment)
Report Report
Item Description Status Raised on Closed on Comments
Nr. Nr.
NA
This template is intended exclusively when BV is The use of present template is forbidden in the
acting as 3° party inspection body. BV STAMP frame of 2° party services where Client
specification and templates must be used.
Industry & Facilities Division
Third Party Inspection Report
Page 6 of 7
I - DIGITAL PICTURES
Pictures related to Tensile Tests Witnessed During Inspection on date 25 th February 2019.
Description: Digital Caliber IDF 077 Description: Material Test Machine, WOLPERT
AMSLER TMT 241
Description: Tensile Test, 6x19 Seale+ FC Ø6 Description: Tensile Test, 8x19 Seale+ FC Ø8
Description: Tensile Test, 8x19 Seale+ FC Ø9 Description: Tensile Test, 8x19 Seale+ FC Ø10
This template is intended exclusively when BV is The use of present template is forbidden in the
acting as 3° party inspection body. BV STAMP frame of 2° party services where Client
specification and templates must be used.
Industry & Facilities Division
Third Party Inspection Report
Page 7 of 7
Description: Tensile Test, 8x19 Seale+ FC Ø11 Description: Tensile Test, 8x19 Seale+ FC Ø12
Description: Tensile Test, 8x19 Seale+ FC Ø13 Description: 8x19 wr+IWRC Ø6,5
J – ATTACHMENTS
END OF REPORT
This template is intended exclusively when BV is The use of present template is forbidden in the
acting as 3° party inspection body. BV STAMP frame of 2° party services where Client
specification and templates must be used.