Professional Documents
Culture Documents
Superbug Bom
Superbug Bom
Superbug Bom
Safety-Related Parts
Hydraulic Brake caliper/lever/hose for minibike 1 ~50 Unknown
Brake rotor 1 Unknown
3/4 shaft hub to mount brake rotor 1 9 Farm and Fleet
E-stop switch 1 0 Salvaged
E-stop contactor 1 52 Gigavac
Fuse Holder (home-made) 1 0
Throttle 1 0 Salvage from motor scooter
Link if Applicable
https://www.arrow.com/en/products/psmn3r5-80ps127/nexperia
https://www.mfgsupply.com/gomini/gominitires/gominitires4/gominitires4slick/8-349.html
https://www.mfgsupply.com/gomini/gominiwheels/gominiwheels4/8-377.html
https://www.jackssmallengines.com/jacks-parts-lookup/part/azusa/1053
https://www.bmikarts.com/Wheel-Hub-with-4-516-Bolts-on-a-2-1316-Circle-34-Bore_p_3057.html
https://www.bmikarts.com/Lightened-Aluminum-Wheel-Rear-Hub-34-Bore_p_347
https://www.accelerationkarting.com/219aluminumsprocket-gold.html
https://www.ombwarehouse.com/sprocket-b-type-steel-219-chain-3-4-bore-3-16-keyway-5-16-18-set-screw-14-tooth.html
https://www.surpluscenter.com/Power-Transmission/Bearings/Pillow-Block-Bearings/3-4-Pillow-Block-Bearing-1-204-12-P-S.a
https://www.arrow.com/en/products/acs758kcb-150u-pff-t/allegro-microsystems
motor scooter
Notes
Approximately 12-18 months ago
Blew up during motor testing for Ebike. Controller is $149 new. I expect new rule about this so we don't break stuff just to get
Only 6 (possibly less) dead but they used some Toshiba part that isn't on the market anymore and controller measures current
This is price shown on 2017 rules. Someone mentioned that market proce may now be higher?
tires4slick/8-349.html
Part currently $10.57. Had bought several sets as spares when I first built car 3 years ago
Circle-34-Bore_p_3057.html
12.95 for new similar part 600115 from BMI karts
Assuming scrap aluminum plate available and access to mill with rotary table
-bore-3-16-keyway-5-16-18-set-screw-14-tooth.html
Approxiamate Value
Block-Bearings/3-4-Pillow-Block-Bearing-1-204-12-P-S.axd
Additional components for throttle-limiter-fuse protector circuit are common easily-salvageable parts
so we don't break stuff just to get lower BOM cost.
e and controller measures current via FET voltage drop. So I replaced them all.