Professional Documents
Culture Documents
Code Reason Effect
Code Reason Effect
Page 1 of 3
Circuit Description
The engine coolant temperature sensor is used by the Electronic Control Module (ECM) to
monitor the engine coolant temperature. The ECM monitors the voltage on the signal pin
and converts this to a temperature value. The engine coolant temperature value is used by
the ECM for the engine protection system and engine emissions control.
Component Location
The engine coolant temperature sensor is located on the exhaust side of the engine near
the thermostat housing. Refer to Procedure 100-002 for a detailed component location
view.
Shop Talk
This fault code indicates that coolant temperature has exceeded the engine protection limits
11:01:40 2007-07-20
Engine Coolant Temperature - Data Valid but Above Normal Operational Range - Mo... Page 2 of 3
for high coolant temperature. Refer to Engine Coolant Temperature Above Normal
symptom troubleshooting tree.
Troubleshooting Steps
STEPS SPECIFICATIONS
STEP 1. Check the fault codes.
STEP 1A. Check for Fault Code Active or inactive counts of Fault Code
146. 146?
Conditions
Action
Active or inactive counts of Fault Code Active or inactive counts of Fault Code
146? 146?
YES NO
Refer to the Engine Coolant Temperature No Repair
Above Normal symptom tree in
Troubleshooting and Repair Manual, ISC,
QSC8.3, ISL and QSL9 Engines, Bulletin
4021418 or ISB (Common Rail Fuel
System) Series Engines, Bulletin 4021271.
11:01:40 2007-07-20
Engine Coolant Temperature - Data Valid but Above Normal Operational Range - Mo... Page 3 of 3
Copyright© 2005
Cummins, Inc.
All rights reserved
11:01:40 2007-07-20