Professional Documents
Culture Documents
Fast & Fluid Management: Punch Installation Manual HA480/HA680
Fast & Fluid Management: Punch Installation Manual HA480/HA680
Punch
Installation Manual
HA480/HA680
English
Version 01-2018
1
Table of contents
Explanation of drawing 3
Installation 4
Setup the punch 6
Replace punch blade 8
2
Explanation of drawing
im. 1.1
3
Installation
Mount the bracket to the dispenser with screw #1 Place new ‘Panel front’ and put the new switch-
(5x). plate in position.
Place side panels onto machine
4
im. 1.6 im. 1.7
Assemble all shown parts onto the tool. Place punch assembly including tool in the hole,
rotate the assembly untill it locks.
Take out assembletool.
5
Setup the punch
6
Punch setup properly
Changing the position of the punchhole in the lid (i.e.,closer to the edge or centre) can have effect on the
punch-result. Experiment to find a position which works on each can size.
7
Replace punch blade
Attention; Through high spring tension the assembly can slip with some speed.