Professional Documents
Culture Documents
Apple Pay: Software Installation Guide
Apple Pay: Software Installation Guide
Verifone, Inc.
88 West Plumeria Drive
San Jose, CA 95134
Telephone: 408-232-7800
http://www.verifone.com
© 2018 Verifone, Inc. All rights reserved.
No part of this publication covered by the copyrights hereon may be reproduced or copied
in any form or by any means - graphic, electronic, or mechanical, including photocopying,
taping, or information storage and retrieval systems - without written permission of the
publisher.
The content of this document is subject to change without notice. The information
contained herein does not represent a commitment on the part of Verifone. All features
and specifications are subject to change without notice.
Verifone, Ruby SuperSystem, and Secure PumpPAY are registered trademarks of Verifone,
Inc. Ruby Card, iOrder, and Commander Site Controller are trademarks of Verifone. All
other brand names and trademarks mentioned in this document are the properties of their
respective holders.
Apple Pay® is a trademark of Apple Inc.
Revision History
Date Comment
May 15, 2017 Initial Release
September 14, 2018 Updated several instances of the Premier Portal
navigation from “Connect” to “Manage”.
Apple Pay® Installation for MX 800 and MX 900 Series PINpads
Load all files as PARTIAL otherwise the application and images will
be erased and will need to be reloaded.
This is the library version 00.04.43 that stays on the PIN pad.
It needs to be loaded if PIN pad is replaced.
1
5. After installing the files above, verify that the version info under Contactless
Diagnostics is correct by logging into System Mode > Diagnostics> Manual Diags.
> More Options > Contactless.
6. Install ctlsconfig.tgz