Professional Documents
Culture Documents
Design Mix M 25 PPC - CP2659-41
Design Mix M 25 PPC - CP2659-41
Waste Water
BWSSB -CP26 K&C Valley - Project
Design Mix No: LNT\CP-26\DM-003
GRADE OF CONCRETE :M25 TYPE OF CONCRETE :RCC
MAXIMUM SIZE OF AGGREGATE, mm :20 CONCRETE CONFIRMS TO :IS456
SLUMP OF CONCRETE, mm(Initial) :Collapse CONCRETE MIX FOR :Dumping/PUMP
SLUMP OF CONCRETE after (2.5hrs retention) :80 to 130mm
TYPE OF EXPOSURE :Severe
MAXIMUM FREE W/C RATIO PERMITTED 0.5
AS PER TABLE 5 OF IS 456-2000
Data on Ingredients:
Average Water Material
Ingredients Type of material Source of materials specific Absorption Percentage
Gravity % used
Cement PPC Dalmia PPC 3.15
20mm Hosur 2.69 0.40 29.5
Coarse aggregate 12.5mm Hosur 2.67 0.50 29.5
NA
Fine Aggregate M Sand Hosur 2.54 4 41
NA --
Mineral 1 PFA
Admixture
2 NA --
plasticizing (PCE MYK arment (Armix
Chemical Admixture based) ElleCrete PC5) 1.05 1
2
Target Strength 31.6 N/mm
Materials required per cum of concrete
Free water content 169 Litres
Air content 1.00 %
Total binder content 360 Kg
Cement content Dalmia PPC 360 Kg
Mineral Admixture 1 PFA 0 Kg
Mineral Admixture 2 NA Kg
Total Aggregate 1844 Kg
Dry coarse aggregate 1 20mm 558 Kg
Dry coarse aggregate 2 12.5mm 554 Kg
Dry coarse aggregate 3 NA 0 Kg
Dry fine aggregate 1 M sand 732 Kg
Dry fine aggregate 2 NA 0 Kg
Chemical Admixture Plasticiser 3.60 Kg
Quantity of
Coarse aggregate 1 20mm 557.93 Kg/ Cum
Coarse aggregate 2 12.5mm 553.79 Kg/ Cum
Coarse aggregate 3 NA 0 Kg/ Cum
Fine Aggregate 1 M sand 732.19 Kg/ Cum
Fine Aggregate 2 NA 0 Kg/ Cum
Total: 1843.91
Adjustment for absorption by aggregates : (Wt.of individual aggregate X water absorption)
1. Free water to be used in one cubic meter of concrete 169
a) Absorption by coarse aggregates - 20 mm 2.23
12.5 mm 2.77
0
b) Absorption by Fine aggregates - River sand 29.29
0
Water reqired for absorption of aggregates 34.29
2. Total water to be used including absorption water (Free water content + water 203.49
absorption) Say 203 Lit
2373 Kg/cum
Total density of fresh concrete = ( Cementitious + Aggregates + Total water )