Professional Documents
Culture Documents
Diffuser - Grilles Serie EP
Diffuser - Grilles Serie EP
Diffuser - Grilles Serie EP
METALAIRE ® S E R I E S E P
Ta b l e o f C o n t e n t s
• Introduction ........................................... 1 Accessories
• Accessories ............................................ 12
Diffusers TREP Deep/TREP Transitions
• Model EP5000 ....................................... 2 EPTR Transition, Blank-Offs
Models EP5000, EP5000D, EP5000DP Dampers OBDE, OBDE-GR, OBDE-R5
Dampers OBDP, OBDP-D5
Grilles & Registers
• Model EPH4002 and EPV4002 ..........3–6 • Available Models & Sizes ...................... 13
Models EPH4002, EPV4002, EPH4002D (pg.3)
Models EPV4002D, EPH4002DP, EPV4002DP (pg.4) • Performance Data ........................... 14–15
Models EPH4002R, EPV4002R, EPH4002RD (pg.5) Series EP4002/EP4004, EP4002R, EPRH (pg.13)
Models EPV4002RD, EPH4002RDP, EPV4002RDP (pg.6) Series EP5000, EPCC5 (pg.14)
• Model EPCC5....................................... 10
Models EPCC5, EPCC5D, EPCC5DP
• Model EPCC5TB.................................. 11
Models EPCC5 TB, EPCC5D TB
All Rights Reserved. Printed in U.S.A. © 1998 Metal Industries, Inc., Clearwater, FL
S E R I E S E P *
METALAIRE ®
P
Series EP grilles, registers and diffus- erformance: All Series EP and register models while Model
ers are designed for use in sidewall models are recommended for OBDE-GR is mounted on the neck.
and ceiling applications which call for heating, cooling and ventilat- Both models can also be duct
the on-site air pattern adjustability, ing applications in constant and vari- mounted. Model EP5000 diffuser
clean, smooth appearance, lightweight, able volume systems. They will perform dampers are duct mounted only.
corrosion resistance and ease of instal- effectively with very high or low air
lation of engineered polymer. loadings and with large cooling temper- Three transition models are available
ature differentials. They will operate for the Series EP5000 diffuser line.
C
onstruction: All models are with supply air temperatures as much Models TREP DEEP and TREP are both
constructed entirely of rigid as 18˚ F below room dewpoint without constructed of aluminum and Model
injection molded engineered forming condensation. EPTR of engineered polymer. The
polymer. This material is ultraviolet light optional OBDP-D5 damper snaps into
stable and will not become brittle with Assembly: Sidewall grilles and regis- the EPTR for easy integration.
age. There are no seams and the color ters and returns are attached to
A
is uniform throughout since it is a flanged duct by conventional means. pplications: Series EP mod-
homogeneous part of the unit. These Surface mounted ceiling diffusers are els are ideally suited for use in
models may be cleaned with commer- fitted to the ceiling by the use of an lab and hospital cleanrooms
cial solvents, in a dishwasher, even innovative mounting bracket and center and restaurants where submersion
steam cleaned without damaging the bolt that dramatically reduce on-site cleaning or frequent swabbing with
product. assembly costs. commercial solvents and antiseptic
cleansers is required for disinfection.
The engineered polymer material used Finish: Standard finish for all Series Ice bank air distribution systems deliv-
in all Series EP models has been inde- EP models is a through-color matte ering very low temperature supply air
pendent laboratory tested in accor- white. Engineered polymer may be fin- and high humidity areas are well
dance with UL standards 94 and 723, ished on-site to match any decor when served by the Series EP units since the
NFPA standards 90 and 255 and ANSI appropriate paints are used. material naturally inhibits the formation
standard 2.5. of condensation.
Accessories: Series EP grilles may
With a flame spread rating of 0 and be ordered with either Model OBDE-GR Magnetic Resonance Imaging facilities,
smoke developed rating of 35, Series (extruded aluminum) or Model OBDP telephone switching stations and elec-
EP material exceeds the requirements (engineered polymer) opposed blade trical equipment rooms take advantage
of the most stringent test standards to dampers. The Series EP5000 diffuser of the Series EP’s non-metallic, dielec-
achieve the best ratings in all applica- can be equipped with either Model tric characteristics. Corrosive atmo-
ble codes. OBDE (extruded aluminum) or Model spheres like those found in swimming
OBDP-D5 (engineered polymer) pools, industrial plants, battery storage,
opposed blade dampers. Model OBDP energy and waste management facili-
snaps easily to the back of the grille ties are ideal locations for Series EP
models.
© 1998 Metal Industries, Inc., Clearwater, FL 1 All Rights Reserved. Printed in U.S.A.
*
METALAIRE ® S E R I E S E P
EP500
0 EP5000
D EP5000
DP
* Actual neck opening is 6 x 6 (155 x 155) for the 9 x 9 (228 x 228) diffuser.
All Rights Reserved. Printed in U.S.A. 2 © 1998 Metal Industries, Inc., Clearwater, FL
S E R I E S E P *
METALAIRE ®
002D
2 EPH4
02 EPV400
EPH40
© 1998 Metal Industries, Inc., Clearwater, FL 3 All Rights Reserved. Printed in U.S.A.
*
METALAIRE ® S E R I E S E P
EPV40
02D EPH40
02DP
EPV400
2DP
Registers are equipped with fac- Registers are equipped with Model Registers are equipped with
tory attached Model OBDE-GR OBDP engineered polymer opposed Model OBDP engineered poly-
extruded aluminum opposed blade dampers. Damper operator is mer opposed blade dampers.
blade dampers. Damper opera- accessible at the register face and Damper operator is accessible
tor is accessible at the register slotted to accept a standard screw- at the register face and slotted
face and slotted to accept a stan- driver. Available in the following to accept a standard screw-
dard screwdriver. Available in the nominal neck sizes: 6″ x 6″, driver. Available in the following
following nominal neck sizes: 12″ x 6″, 8″ x 8″, 10″ x 10″, and nominal neck sizes: 6″ x 6″,
6″ x 6″, 8″ x 8″, 10″ x 10″, and 12″ x 12″. Damper finish is through- 8″ x 8″, 10″ x 10″, and 12″ x 12″.
12″ x 12″. Damper is mill color matte black. Damper finish is through-color
finish aluminum. matte black.
All Rights Reserved. Printed in U.S.A. 4 © 1998 Metal Industries, Inc., Clearwater, FL
S E R I E S E P *
METALAIRE ®
002 RD
2 R EPH4
02R EPV400
EPH40
© 1998 Metal Industries, Inc., Clearwater, FL 5 All Rights Reserved. Printed in U.S.A.
*
METALAIRE ® S E R I E S E P
EPV40
02RD EPH40
02RDP
EPV400
2RDP
Registers are equipped with fac- Registers are equipped with Model Registers are equipped with
tory attached Model OBDE-GR OBDP engineered polymer opposed Model OBDP engineered poly-
extruded aluminum opposed blade dampers. Damper operator is mer opposed blade dampers.
blade dampers. Damper opera- accessible at the register face and Damper operator is accessible
tor is accessible at the register slotted to accept a standard screw- at the register face and slotted
face and slotted to accept a stan- driver. Available in the following to accept a standard screw-
dard screwdriver. Available in the nominal neck sizes: 6″ x 6″, driver. Available in the following
following nominal neck sizes: 12″ x 6″, 8″ x 8″, 10″ x 10″, and nominal neck sizes: 6″ x 6″,
6″ x 6″, 8″ x 8″, 10″ x 10″, and 12″ x 12″. Damper finish is through- 8″ x 8″, 10″ x 10″, and
12″ x 12″. Damper is mill color matte black. 12″ x 12″. Damper finish is
finish aluminum through-color matte black.
All Rights Reserved. Printed in U.S.A. 6 © 1998 Metal Industries, Inc., Clearwater, FL
S E R I E S E P *
METALAIRE ®
004D
4 EPH4
04 EPV400
EPH40
EPV40
04D EPH40
04DP
EPV400
4DP
All Rights Reserved. Printed in U.S.A. 8 © 1998 Metal Industries, Inc., Clearwater, FL
S E R I E S E P *
METALAIRE ®
DP
EPRH
EPRHD
EPRH
© 1998 Metal Industries, Inc., Clearwater, FL 9 All Rights Reserved. Printed in U.S.A.
*
METALAIRE ® S E R I E S E P
Series EP’s Conform to UL 94V-O and
UL 94-5VA Ratings.
EPCC5
EPCC5
D
EPCC5
DP
Attractive 1--2- ″ x 1--2- ″ grid by 1--2- ″ deep Registers are equipped with factory Registers are equipped with
design. Available in the following attached Model OBDE-GR extruded Model OBDP engineered polymer
nominal neck sizes: 6″ x 6″, aluminum opposed blade dampers. opposed blade dampers. Damper
12″ x 6″, 8″ x 8″, 10″ x 10″, and Damper operator is accessible at operator is accessible at the regis-
12″ x 12″ for surface mount. A the register face and slotted to ter face and slotted to accept a
24″ x 24″ T-Bar face size, Model accept a standard screwdriver. standard screwdriver. Available in
EPCC5 TB, is available for non- Available in the following nominal the following nominal neck sizes:
ducted applications or can be neck sizes: 6″ x 6″, 6″ x 6″, 12″ x 6″, 8″ x 8″, 10″ x 10″,
used with an aluminum transition 12″ x 6″, 8″ x 8″, 10″ x 10″, and 12″ x 12″. Damper finish is
for use with round duct. Finish is and 12″ x 12″. Damper is mill through-color matte black.
through-color matte white. finish aluminum.
All Rights Reserved. Printed in U.S.A. 10 © 1998 Metal Industries, Inc., Clearwater, FL
S E R I E S E P *
METALAIRE ®
D TB
TB EPCC5
EPCC5
© 1998 Metal Industries, Inc., Clearwater, FL 11 All Rights Reserved. Printed in U.S.A.
*
METALAIRE ® S E R I E S E P
Accessories
OBDP
OBDP-D5 OBDE-R5
TREP
EPTR
Size A B C
All Rights Reserved. Printed in U.S.A. 12 © 1998 Metal Industries, Inc., Clearwater, FL
S E R I E S E P *
METALAIRE ®
18″ x 18″** 17 3--4- ″ x 17 3--4- ″ 18″ x 18″ 23 3--4- ″ x 23 3--4- ″ 20 1--2- ″ x 20 1--2- ″ ** 9″ x 9″ and 18″ x 18″ For Use in
Surface Mount (-1) or T-Bar
(457 x 457) (450 x 450) (457 x 457) (603 x 603) (521 x 521) Ceiling Grid (-6) Applications.
Series EP4002R
Flow Rate Size Inches (mm)
CFM (Ls) 6 x 6 (150 x 150) 8 x 8 (200 x 200) 10 x 10 (250 x 250) 12 x 6 (300 x 150) 12 x 12 (300 x 300)
52 Ps Inches (Pa) 0.008 (2) 0.004 (1)
(25) NC — —
106 Ps Inches (Pa) 0.032 (8) 0.008 (2) 0.004 (1) 0.008 (2)
(50) NC — — — —
212 Ps Inches (Pa) 0.129 (32) 0.032 (8) 0.016 (4) 0.028 (7) 0.008 (2)
(100) NC 24 — — — —
318 Ps Inches (Pa) 0.060 (15) 0.032 (8) 0.060 (15) 0.016 (4)
(150) NC 22 — 20 —
424 Ps Inches (Pa) 0.160 (40) 0.060 (15) 0.108 (27) 0.028 (7)
(200) NC 30 20 27 —
530 Ps Inches (Pa) 0.241 (60) 0.088 (22) 0.173 (43) 0.044 (11)
(250) NC 35 25 32 —
636 Ps Inches (Pa) 0.120 (30) 0.249 (62) 0.052 (13)
(300) NC 30 37 22
848 Ps Inches (Pa) 0.241 (60) 0.108 (27)
(400) NC 38 30
Series EPRH
Flow Rate Size Inches (mm)
CFM (Ls) 6 x 6 (150 x 150) 8 x 8 (200 x 200) 10 x 10 (250 x 250) 12 x 6 (300 x 150) 12 x 12 (300 x 300)
52 Ps Inches (Pa) 0.028 (7) 0.008 (2) * 0.004 (1)
(25) NC — — — —
106 Ps Inches (Pa) 0.108 (27) 0.040 (10) 0.016 (4) 0.024 (6)
(50) NC 20 — — —
212 Ps Inches (Pa) 0.140 (35) 0.060 (15) 0.108 (27) 0.028 (7)
(100) NC — — — —
318 Ps Inches (Pa) 0.120 (30) 0.221 (55) 0.060 (15)
(150) NC 27 34 19
424 Ps Inches (Pa) 0.201 (50) 0.402 (100) 0.100 (25)
(200) NC 36 42 27
530 Ps Inches (Pa) 0.153 (38)
(250) NC 32
636 Ps Inches (Pa) 0.201 (50)
(300) NC 36
All Rights Reserved. Printed in U.S.A. 14 © 1998 Metal Industries, Inc., Clearwater, FL
S E R I E S E P *
METALAIRE ®
Performance Data
Series EP5000
Neck Size Neck Vel. FPM (M/s) 300 (1.5) 400 (2.0) 500 (2.5) 600 (3.0) 700 (3.5)
Inches (mm) Pt Inches (Pa) 0.036 (9) 0.060 (15) 0.092 (23) 0.133 (33) 0.173 (43)
CFM (Ls) 72 (34) 95 (45) 119 (56) 144 (68) 167 (79)
6x6 Throw Max. Ft. (M) 5 (1.5) 7 (2.0) 8 (2.5) 10 (3.0) 12 (3.5)
(150 x 150) Throw Min. Ft. (M) 3 (1.0) 3 (1.0) 5 (1.5) 5 (1.5) 7 (2.0)
NC — — — — 19
CFM (Ls) 286 (135) 381 (180) 477 (225) 572 (270) 668 (315)
12 x 12 Throw Max. Ft. (M) 8 (2.5) 12 (3.5) 15 (4.5) 16 (5.0) 20 (6.0)
(300 x 300) Throw Min. Ft. (M) 5 (1.5) 7 (2.0) 7 (2.0) 8 (2.5) 10 (3.0)
NC — 21 26 31 34
CFM (Ls) 644 (304) 858 (405) 1073 (504) 1288 (608) 1502 (709)
18 x 18 Throw Max. Ft. (M) 13 (4.0) 16 (5.0) 21 (6.5) 26 (8.0) 30 (9.0)
(450 x 450) Throw Min. Ft. (M) 7 (2.0) 8 (2.5) 8 (2.5) 13 (4.0) 15 (4.5)
NC 23 30 35 38 42
Series EPCC5
Size Inches (mm)
Flow Rate
CFM (Ls)
6 x 6 (150 x 150) 8 x 8 (200 x 200) 10 x 10 (250 x 250) 12 x 6 (300 x 150) 12 x 12 (300 x 300) 23 x 23 (584 x 584)
52 Ps Inches (Pa) 0.008 (2) 0.004 (1)
(25) NC — —
106 Ps Inches (Pa) 0.032 (8) 0.008 (2) 0.004 (1) 0.008 (2)
(50) NC — — — —
212 Ps Inches (Pa) 0.128 (32) 0.036 (9) 0.016 (4) 0.028 (7) 0.008 (2)
(100) NC 28 18 — — —
318 Ps Inches (Pa) 0.060 (15) 0.032 (8) 0.060 (15) 0.016 (4)
(150) NC 28 18 23 —
424 Ps Inches (Pa) 0.161 (40) 0.060 (15) 0.108 (27) 0.028 (7) .002 (.5)
(200) NC 36 25 33 15 —
530 Ps Inches (Pa) 0.241 (60) 0.088 (22) 0.173 (43) 0.044 (11) .004 (1)
(250) NC 42 30 37 22 —
636 Ps Inches (Pa) 0.120 (30) 0.241 (62) 0.052 (13) .006 (1.5)
(300) NC 35 42 27 —
848 Ps Inches (Pa) 0.241 (60) * 0.108 (27) .010 (2.5)
(400) NC 43 — 35 —
1060 Ps Inches (Pa) 0.160 (40) .016 (4)
(500) 9NC 41 —
Throw distances are rounded to the nearest foot or one half meter. Ls = Liters per second
Throws are based on 4-way air pattern and terminal velocities for a CFM = Ls ÷ 0.4719
maximum throw of 80 FPM (0.4 M/s) and for a minimum throw of 120 Pa = Pascal
FPM (0.61 M/s). Inch of W.G. = Pa ÷ 249
NC is based on 10 dB room absorbtion. M/s = Meters per second
Pt is the total pressure drop across the diffuser in inches W.G. (Pa). FPM = Feet per minute (M/s x 197)
Ps is static pressure in inches W.G. mm = millimeters
Neck sizes are nominal in inches and millimeters. mm = Inches x 25.4
For directional throws, reduce the CFM (Ls) by the following * = Pressure drop less than 0.001
percentages: — = NC less than 15
3-Way –Reduce airflow by 25%; all other values unchanged.
2-Way –Reduce airflow by 50%; all other values unchanged. Correction factors for 45˚ blade deflection:
1-Way –Reduce airflow by 75%; all other values unchanged. Throw x 0.55 NC + 8 dB Ps x 3.1
© 1998 Metal Industries, Inc., Clearwater, FL 15 All Rights Reserved. Printed in U.S.A.
S E R I E S E P *
METALAIRE ®
Ordering Information
Sample Order
SAMPLE
Quick Ship
Ship
Via:
Regular Truck United Parcel Quick Truck Air Freight Bus
1 EPV4002DP 12 x 12 W
4 EPH4004 12 x 6 W
2 EPCC5DP 6x6 W
3 EPCC5 10 x 10 W
Total List
Net.
Salesman: Tax
Total
© 1998 Metal Industries, Inc., Clearwater, FL 16 All Rights Reserved. Printed in U.S.A.