Professional Documents
Culture Documents
PS-1223 Technical Specifications - US
PS-1223 Technical Specifications - US
PS-1223 Technical Specifications - US
PS-1223
FEATURES
12V 2.30 AH @ 20-hr. • Absorbent Glass Mat (AGM) technology for
12V 2.25 AH @ 10-hr. superior performance
Rechargeable Sealed Lead Acid Battery • Valve regulated, maintenance free spill proof construction
PS – General Purpose Series • Power/volume ratio yielding excellent energy density
APPROVALS
6 6
10.5 13.5
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A.
and C.A.B. certified
0.5 0.5
• U.L. recognized
• ISO9001:2015 – Quality management systems
W Nominal Capacity
20-hr. (115mA to 10.50 volts) 2.30 AH
10-hr. (225mA to 10.50 volts) 2.25 AH
5-hr. (390mA to 10.20 volts) 1.95 AH
1-hr. (1.38A to 9.00 volts) 1.38 AH
HT H
Battery Do not make direct contact between battery terminals.
Do not discharge completely.
Recharge battery immediately after use.
Do not use other than specified battery charger.
Do not use below -10º C (15º F) or above + 40º C (105º F).
Recharge battery immediately after use.
by a bimetal circuit
breaker. If the current
If the temperature exceeds this upper limit,
MODEL PS-1223 a safety device will automatically prevent
discharge temperature
M
Pb
YC L E D
MUST BE RECYCLED OR
BA
L: 7.17 (182) W: 0.94 (24) H: 2.40 (61) HT: 2.40 (61) Operating Temperature Range
Charge 5°F (-15°C) to 122°F (50°C)
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for Discharge -4°F (-20°C) to 140°F (60°C)
height dimensions. All data subject to change without notice.
Case ABS Plastic
CORPORATE HEADQUARTERS POWER-SONIC EUROPE LIMITED
(USA AND INTERNATIONAL EXCLUDING EMEA) (EMEA – EUROPE, MIDDLE EAST AND AFRICA) PSC-12300A-C
Power-Sonic Corporation 3 Buckingham Square, PSC-12300-PC with
Power Sonic Chargers 034055 charger cord
7550 Panasonic Way, San Diego, Hurricane Way, Wickford,
with camcorder clip
California 92154 Essex SS11 8YQ
(sold separately)
T: +1 (619) 661 2020 T: +44 (0)1268 560686
F: +1 (619) 661 3650 F: +44 (0)1268 560902
E: customer-service@power-sonic.com E: salesEMEA@power-sonic.com
Rev1: 11/18
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
© 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
All data subject to change without notice. E&O.E www.power-sonic.com
PS SERIES
PS-1223 12V 2.30 AH @ 20-hr.
12V 2.25 AH @ 10-hr.
LIFEAmbient
CHARACTERISTICS IN STAND-BY USE
necessary unless
Capacity Retention Ratio (%)
80
CHARGING CHARGERS
Cycle Applications: Apply constant voltage charge at Power Sonic offers a wide range of chargers suitable
2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. for batteries with a variety of capacities.
Initial charging current should be set at less than 0.25C
Please refer to our website for more information on
Amps. Switch to float charge to avoid overcharging.
our switch mode and transformer type chargers.
“Float” or “Stand-By” Service: Apply constant voltage
Please contact our technical department for advice if
charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v
you have difficulty in locating a suitable charger.
Monobloc at 20°C. When held at this voltage, the battery
will seek its own current level and maintain itself in a fully
charged condition. FURTHER INFORMATION
Temperature Compensation: Charging Voltage for both Please refer to our website www.power-sonic.com
Cyclic and Standby applications should be regulated in for a complete range of useful downloads, such as
relation to ambient temperature. As temperature rises product catalogs, material safety data sheets (MSDS),
charging voltage should be reduced to prevent overcharge ISO certification, etc.
and increased as temperature falls to avoid undercharge.
For further charging information including temperature
compensation factors, see Power Sonic Technical Manual/
Power Sonic Charger specifications.
APPLICATIONS
• General purpose • Medical
• Emergency lighting • Fire and security
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
© 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
All data subject to change without notice. E&O.E www.power-sonic.com