Professional Documents
Culture Documents
1727 Instruction PDF 11630
1727 Instruction PDF 11630
You will also need: dress zipper, bias tape (approx. length is
shown on left front pattern piece).
Attention! First of all, please print all the paper patterns and
lay them out at the width of fabric you plan to use (usually
from 90 to 150 cm) to see how much fabric you will need.
Don't forget to take into account pieces to be duplicated or cut
on a fold.
CUTTING:
The word, “beam” used on some patterns means “straight of grain”. Some pieces will be cut on the
fold, this is noted on the pattern piece. Mark all notches and other design features such as darts,
pleats etc. from the pattern onto your fabric.
Fabric 1:
1. Central back - cut 2
2. Side back — cut 2
3. Side front — cut 2
4. Central front – cut 1
5. Left front – cut 1
6. Sleeve – cut 2
INSTRUCTIONS:
1. Serge separately middle edges of back. Sew middle edge from zipper mark down to hem. Press
apart the seam. Sew in zipper. Sew side and central backs. Serge the seam and press toward
center.
2. Make and fasten pleats on central front. Darts are directed downwards.
3. Sew shoulder edges. Serge seams and press to ward back.
TECHNICAL DRAWING: