Professional Documents
Culture Documents
Crown Shim & Stabbing SCF
Crown Shim & Stabbing SCF
Crown Shim & Stabbing SCF
The information contained in this document is the proprietary to North Oil Company. It must not be reproduced, stored, disclosed to any third party or used for any purpose not authorized by North
Oil Company. Printed documents are uncontrolled and considered as "for information only". Reference should always be made to the on-line EDMS for the updated version
Page 77 of 110
Stress Concentration Factors for Topside Stabbing point
Page 1 of 2 Appendix C7
Location - Topside to Jacket Bearing plate
Input Parameters:
1.0 3.0
β := 1.5 - +
β = 2.015
log
Dia 2
log Dia
thk thk
1.82 Lt 1
α := α = 0.209
Dia thk β
1+ Thk
thk
Top of Column (TOC) Stress Concentration Factors
Thk
=1
thk
(
6 δt + δm - δ0 ) 1 -α Thk
SCFTOC := 1+ e if 2
thk 2.5 thk
1+ Thk
thk
SCFTOC = 2.095
"Equation not Valid" otherwise
Page 2 of 2 Appendix C7
This spreadsheet calculated the Stress Concentrations to be applied to the Rings on tubulars, as according to
DNVGL-RP-C203, 2014.
tr
ts
hr
Ds
4 2
Area of ring stiffener Ar := hr tr + trf h rf Ar = 2.6 10 mm
Ds
rs :=
radius of shell 2
type of ring ("1" for external rings, "2" for internal rings) type := 2
0.54
SCFr := 1+ if type = 1
α For external ring
SCFr = 0.681
Page 1 of 1 Appendix C7
Client Project No.
CALCULATION SHEET
Doc. No.
Consultant Calculated By DH
BLOCK 5 - AL SHAHEEN FIELD
Checked By PIL
DEVELOPMENT
Date 24-Aug-2018
DC, EG, FC PLATFORM Rev 00
This calculation sheet is for the jacket crown plate for determining the weld stresses.
The stresses would be used for strength check as well as for fatigue checks.
This calculation is confidential and is the exclusive property of sapura energy bhd. No unauthorized use, copy or
disclosure of the calculation is to be made and it is to be returned whenever required.
Consultant Calculated By DH
BLOCK 5 - AL SHAHEEN FIELD
Checked By PIL
DEVELOPMENT
Date 24-Aug-2018
DC, EG, FC PLATFORM Rev 00
2*y4 + Y = 275
Y= 263.21 y2 y3
X= 232.2
This calculation is confidential and is the exclusive property of Sapura Energy bhd. No unauthorized use, copy or
disclosure of the calculation is to be made and it is to be returned whenever required.
Page 1 of 3 Appendix C7
Location - Jacket crown to jacket
Input Parameters:
1.0 3.0
β := 1.5 - +
β = 2.066
log
Dia 2
log Dia
thk thk
1.82 Lt 1
α := α=0
Dia thk β
1+ Thk
thk
Top of Column (TOC) Stress Concentration Factors
Thk
= 1.417
thk
(
6 δt + δm - δ0 ) 1 -α Thk
SCFTOC := 1+ e if 2
thk 2.5 thk
1+ Thk
thk
SCFTOC = 2.048
"Equation not Valid" otherwise
Page 2 of 3 Appendix C7
Page 3 of 3 Appendix C7