Professional Documents
Culture Documents
Terminations Cold Contractile
Terminations Cold Contractile
Terminations Cold Contractile
Cold contractile
Data sheet
Description:
Profits:
Cold shrink QT-III Terminations for indoor or
outdoor dry cable service offer easy and safe Lowest installation cost
installation, as well as reliable performance when Minimal training
terminating power cable. All materials are included in the set
Easy cable preparation (shorter cutting distance)
We have at your disposal terminals for dry cable of
wires or copper tape, special terminals for inverted Compact to facilitate its location in small spaces.
installations.
It does not require additional tools for installation.
High Reliability
Requires no heat, flame, or special tools
Characteristics:
Simple fail-safe installation
Hydrophobic silicone body (does not allow moisture Strain control and seals pre-installed at the factory
accumulation)
Superior resistance to electric shock and erosion Excellent appearance, more professionalism to your
work
Optimal stress control with high dielectric constant 25 years of proven field experience
(high-K stress control)
Installation does not require additional silicone tape or
grease
Kit Contents:
Superior UV stability Shorter terminal for saturated
Each kit contains the following materials necessary
spaces Ease of installation without tools
to make the monopolar cable terminations or a
tripolar termination (*): 3 insulators with high
additional
dielectric constant self-contracting silicone rubber
Designed to meet or exceed IEEE 48, VDE 0278 and
skirts. 3 constant action springs for ground
IEC 502 standards
connection. 3 tomatierra braids. 6 pieces of mastic
seal. 1 roll super 33+ vinyl tape. A CC-2 Cable
Applications:
Preparation Kit. 1 assembly instructions. (*) The
tripolar termination kits also include 3 phase
Power cable connection to equipment or transitions
isolation seals. 1 PST Trifurcation Seal.
Avoid dangerous shocks to the cable
All Kits include supplies necessary to make a 3-prong termination. In case you
require a Tripolar Kit, you just have to add a “-3” at the end of the product code. Ex:
7621-T-95-3
600-300-3636
E-mail: atencionconsumidor@3m.com