Professional Documents
Culture Documents
Toyota 4runner 2020 - Dash Camera
Toyota 4runner 2020 - Dash Camera
x1 x1 x1 x1
PK6A4-33HT1 PK6A4-33HC0 PK6A4-33HS0 PK6A4-33HM1
X
Wire Channel Wire Harness Wire Tie Vinyl sheet Foam Tape Harness Clip
x1 x1 x18 x2 x2 x1
Not used - Discard
Recommended Tools
Additional Items Personal & Vehicle Protection Description
(may be required) Vehicle Protection Blankets, Part Boxes
Special Tools
Item# Description
Dash Camera Mounting Template IADS# 4RU20-0011
Installation Tools
Screwdriver #2 Phillips, Flat Blade Jeweler’s
Panel Removal Tool Toyota SST# 00002-06001-01
Side Cutters
Battery: 48 in•lbf (5.4 N•m),
Torque Wrench Ground Bolt: 75 in•lbf (8.5 N•m)
Knee Airbag: 88.5 in•lbf (10 N•m)
Recommended Sequence
Pliers Needle-nose, Universal
of Application
Scissors
Item# Description Tape Measure / Ruler
Ratchet
Tape Electrical, Masking
Socket 10mm, Extension
Special Chemicals
Cleaner VDC Approved Cleaner
Glass Cleaner Toyota Touch Glass Cleaner
Table of Contents
I. Preparation............................................................................................................................. 1 – 3
1. Table of Contents.................................................................................................................................................2
2. Wire Harness Outline...........................................................................................................................................3
II. Procedure............................................................................................................................. 4 – 21
1. Vehicle Disassembly. ................................................................................................................... 4
2. Dash Camera Installation. ........................................................................................................... 10
3. Wire Harness Installation............................................................................................................. 13
4. Vehicle Reassembly.. ................................................................................................................. 19
III. Checklist............................................................................................................................. 22– 24
1. Accessory Function Checks...............................................................................................................................22
2. Vehicle Appearance Check................................................................................................................................22
3. Vehicle Function Checks....................................................................................................................................23
5P Blue (Dash
B -
PREPARATION
Camera connector)
Issue D: 11/06/19
5P Blue
C -
(for Dash Camera)
D G1 Ground Terminal
TOYOTA 4RUNNER
Page 3 of 24
2020 –
E
B
F
C
DASH CAMERA
TOYOTA 4RUNNER 2020 – DASH CAMERA
PROCEDURE
10
7
Disconnect all Corresponding
Connectors.
1. Vehicle Disassembly
10mm Socket Fig. 1-1
a. Place the Vehicle in Park with
the Parking Brake set.
b. Disconnect the Negative
Battery Terminal.
• Protect the Fender.
• Note the Battery Cable Position
as it will be re-installed in the
same position.
*1
Clip
Guide
Downward
*1
*1
80mm
250mm
Vinyl Sheet
25mm
25mm
2 x (25x200 mm)
75mm
PPO Only
Masking Tape Fig. 2-7
m. Line up the Dash Cam
Mounting Template (IADS#
4RU20-0011) on the
windshield to the LH side of
the rearview mirror as shown.
• Use masking tape to attach
template to the windshield.
n. Attach the Dash Camera
on the Windshield aligning
it within the Dash Cam
Mounting Template.
Panel Removal Tool Fig. 2-8 o. Route the Dash Camera wire
between the Headliner and
the Roof.
10mm
Overlap
Ground Terminal
EX
A
Lock Engaged
No Gap
M
PL
VERIFY: Ensure locks have
Fig. 3-6 engaged on both sides.
E
of the Splicing Connector locks.
*Click*
*Click*
No Gap
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21
10
9
11
4. Vehicle Reassembly.
Reassembly Overview Fig. 4-1
a. Reassemble the Vehicle.
Function Function
□ Starter □ Gauges
□
hicle the TPMS light will illuminate for a few
Cruise Control Light (if equipped)
seconds and go off when IG is turned on.
□ Brake Lights
□ Daytime Running Lights (if equipped)
□ Backup Lights
□ Marker Lights
□ Head Light
□ Fog Lights (if equipped)
□ High Beams
□ Accessory Controls/Illumination
(if equipped)
Function Function
□ Front Wiper/Washer □ Rear Wiper/Washer (if equipped)
□ Power Sun/Moon Roof (if equipped) □ Rollover Side Curtain Air Bag Switch (RSCA)
(if equipped)
□ Clock (if equipped) □ Navigation System (if equipped)
□ Front Windshield Defogger (if equipped) □ Rear Window Defogger (if equipped)
□ Side Mirror Defogger (if equipped) □ Accessory Power Socket (if equipped)
□ Glove box Light (if equipped) □ Trunk Cancel Switch (if equipped)