Professional Documents
Culture Documents
CISCO Stealthwatch Free Training
CISCO Stealthwatch Free Training
Core Components:
1) SMC
2) Flow Collector
SMC:
We do all Configuration, Monitoring & Integrations, and it will do reporting for the
solution. We can have a maximum of 2 SMC in our deployment ( HA), it can be
virtual or physical.
As you can see in the screenshot, SMC displays multiple alarm categories on its
dashboard. This easiness is very important for a soc administrator or team to act
fast.
Flow Collector:
It will collect all the Netflow traffic from devices like firewalls, router, or switches, and
the flow database is in this component.
We have different collectors for NetFlow/IPFIX and sflow
this also can be virtual or physical, and the maximum number of FC per deployment
is 25.
Solution Intro:
As you can see in the graph that Cisco stealthwatch will collect context information
and flow from all types of network devices, it will then classify, and it will create a
baseline for almost everything, even your printer! And then, based on the machine
learning algorithm and all the intelligence from cognitive, it will alarm you and report
you about network security or even performance issues.
You can also integrate it with other mitigation solutions like Cisco ISE, or even you
can push a null0 route to your end device for bad traffic.
In my opinion, it's a very robust solution for before and after an attack.
Optional Components:
1) Flow Sensor
2) UDP Director
3) Endpoint Concentrator
Flow Sensor
What if our devices in the network don't support NetFlow at all?
Like Cisco Catalyst 2960?
In this case, we can copy our traffic with span or RSPAN.
Flowsensor can be the destination of this copies traffic,then flow sensor will produce
Netflow and will send to flow collector.
Flowsensor can be a physical or virtual appliance.
UDP Director:
Allows Netflow, Syslog and SNMP data to be sent transparently to multiple collection
points. It can repeat traffic to numerous Flow Collectors.
UDP Director can also be a physical or virtual appliance.
Endpoint Concentrator:
By installing Cisco anyconnect visibility module, we can send flow directly from our
endpoints to the flow collector via the "endpoint concentrator" appliance.
The total solution is very similar to this diagram:
In our next lesson (video lesson) I will show you how easily we can install and
integrate them, and then will together go deep.