Professional Documents
Culture Documents
Manual Diver 5030.D
Manual Diver 5030.D
(0) position
MAINTENANCE
Hour hand
TW Steel uses the best materials and carries out
Push-button A
strict controls before the watch leaves the factory. Minute
The way in which you wear or treat your TW Steel counter
Minute hand
will determine whether the appearance of the
watch is maintained in the future, or whether it will Second Crown / normal
deteriorate. In order to enjoy wearing your TW Steel counter crown position
as long as possible, we include a number of tips: If 28
5030.D SWISS MADE MOVEMENT
A
Setting the time A Chronograph:Setting the time A Chronograph:
A A **Pull out the crown to position III
30 60
Intermediate
or interval
stops). timing Intermediate or interval timing
* Pull out the crown to position III
45 15
Example: (thewatch
* Pull out the crown to position III
30 60 30 2060 10
30 60 30 60 Example:
(the watch stops). 30
(the watch stops).
III Start: (start timing)
**Turn Start: (start timing)
12
20 10
45 15
20 10
45 15
10 2 3 45 I 15 II the crown until the correct date 20 10
45 15
30
12
30
8
20
4
10
30
Display interval: 4 appears. 30 Display interval:
12 12
23 I II III 23 12
I e.g.II 20III minutes 17 seconds (timing
10 2 10 2 6
10 2 23 10 2 23 e.g. 20 minutes 17 seconds (timing
Turn the crown until you reach the correct B4 continues **in Continue
the background)
to the
turncrown
the crown
8
6
4 8
6
4 8
* Turn until until the the correct
you reach 8 4 *
continues in the background)
time 8:45. 6 Making up correct
the measured
time 8:30time:
time8:45. PM appears. 6
Making up the measured time:
B B (The chronograph hands are quickly B
A B (The chronograph hands are quickly
advanced **to Push
the ongoing
the crown measured
back into time.)
position I. advanced to the ongoing measured time.)
Stop:
(Final time is displayed) Stop: (Final time is displayed)
A * Push the crown back into position I. A * Push the crown back into position I. A
A Reset: Reset:
30 60
45 15 The chronograph hands are returned to The chronograph hands are returned to
30 60
Please note: 30 2060 10
30 30 60
their zero position.
Please
Please note: note: 30 60 their zero position.
20 10
45 15 * In order to set the time to the exact second, 20 10
45 15
10
12
2 4 45 I 15 II III **To set *your
In order
watchtotoset
thethe timesecond,
exact to the exact second, 45 15
30 must be pulled out when the second hand 30
8
20 10
30 Please note:please must
refer to be
thepulled
chapterout when the
entitled second hand
«setting
20 10
30 Please note:
4
III
12 12
I II III is in position «60». 23 * I Following , further
is inintervals
position or inter- * Following , further intervals or03
12 12
10 2 23 10 2 23 6
10 2 II the time». «60». 10 2 23 inter-
/ 2019
8 4 Once the hour and minute hands have been 8 4 B4 mediates** can be displayed
PleaseOnce
observe by
the the pressing
hourAM/PM
and minute hands have been
clock rhythm. mediates can be displayed by pressing
6
set, must be pushed back into position I at 6 8 6 push-button B (display interval
set, must be /pushed
make up back into position I at
8
6
4
push-button B (display interval / make up
B Battery type: 395 / SR927SW B
B the exact second. B measured time, ...). the exact second. measured time, ...).
02 07 04 02 07+20 / -10 seconds per month
Accuracy:
RONDA startech
A
– Movement Cal.(quick
Setting the date 5030.D & 5021.D
mode)
A A A
Adjusting theSetting
Chronograph: chronograph
the date
Basic (quick mode)
function
A
Adjusting the chronograph
hands to zero
(Start / Stopposition
/ Reset) hands to zero position
User’s Manual English Pull out the crown to position II (the watch
Example:
30 60
continues to run).
30 60
30 30 60
60 Example: Pull out the crown to position II (the watch 30 60 Example:
45 15 45 15 45 15 45 15
One or several chronograph hands
continues toare not in
run). One or several chronograph hands are not in
20 10 20 10 20 10 zero
their correct Start: Press push-button
positions and have to A. be
45 15
their correct zero positions and have to be
You have31decided
II to buy a watch, which was assembled by a watch-
20 10 20 10
30 30 30 30 30
10 I
12
2 10
12
2310
12
I2 II10
2
12
III2 31
adjusted
I II (e.g. following a battery change). 12
I II III adjusted (e.g. following a battery change).
2 3 23
maker using a Ronda movement.
Turn thePlease note that no watches are Stop: to stop the timing, press push- 10 2
8 4 crown until the correct 8 4 8
Pull out the button Turn the crown until the correct
crownA to
once more III
and
(allread the
8 4 4
6 position 8 4
Pull out the crown to position III (all
produced or distributed under the1 Ronda
appears.brand. 6
date 6 6 6
B B B chronograph handsdate
chronograph appears.
in1their
are hands: 1h / 20min
correct or / 38 sec. chronograph hands are in their correct or
B incorrect zero position). B
incorrect zero position).
In case of repairs, guarantee claims and questions concerning
A A
the functioning of a watch,Push the crown back into position I.
purchasers and consumers should A A Push the crown back into position I.
Zero positioning:
Keep push-buttons A and B depressed
A
Keep push-buttons A and B depressed
contact their retailer or the watch manufacturer, for which the
30 60
Press push-button
simultaneously
(The
for at least 2B.seconds
chronograph hands
simultaneously for at least 2 seconds
bywill be reset
30 60
30 30 60 60
(the second counter hand rotates 30 60
(the second counter hand rotates by
20 relevant information can be found in the sales or guarantee
10
45
30
15
20 10
45
20 10
15 45
20 10
15 45 15
to their zero
360° corrective mode positions.)
is activated). 20 10
45 15
360° corrective mode is activated).
documentation IIprovided with the watch.
30 30 30 30
12
101 I 2 Please note: 10
12
2 2310
12
2 23
10
12
III2 1 I II Please note: 10
12
23 III
2
8 4
During the date changing phase between 8 4 8 During the date changing phase between
8 4
6 approx. 9 PM and 12 PM; the date must be 6 6
4
6 approx. 9 PM and 12 PM; the date must be
8
6
4
B set to the date of the following day. B B B set to the date of the following day. B
03 05 03
A Adjusting the second counter hand A Adjusting the second counter hand
CAUTION : IFA THE
Description CROWN
of the Setting
display andISthe date/time
NOT
control PRESSED
buttons IN PROPERLY, THE Single step
WATCH A
AA IS NO
1 xChronograph:
short Setting the date/time Single step A 1 x short
A
Continuous long Continuous A long
following a battery change
Accumulated
followingtiming
a battery change
LONGER WATERPROOF
30 AND THE MOVEMENT CAN BE SERIOUSLY
Example:
60
B DAMAGED!
Adjusting
hand BExample:
the next
Example: 30
3060 60
B Adjusting the next hand B
45 15
– Date / time on the watch: 17Control
/ 1:25 AM Start: (start timing)
45 15
20 10 Display
30
elements buttons 20 10 2045 1015 – Date / time on the watch: 17 / 1:25 AM
12
I II – Present date / time: 4 / 8:30 PM A Adjusting
30
12 the
30
hour counter hand at 5030.D
– Present
Stop: (e.g. (position
15 date
min 5 sec 6h)
/ time: 4 /
following 8:30
) PM A Adjusting the hour counter hand at 5030.D (position 6h)
10 2 17 12
17 I II
Second hand 10 2 210
Single3 step
2
A 1 x
short
8 4 Pull out the crown to position II Restart: (timing is resumed) Single step A 1 x short
6 8 Continuous
4
8
6
4
A long Pull out the crown to position II Continuous A long
Minute hand (the watch continues to run). 6
* Stop: (e.g.
(the watch continues to run). )
5min 12 sec following
B Push button A B
B the next
B Adjusting hand B = 20 min 17 sec B Adjusting the next hand B
Hour hand 30 60
A A
Setting the time A Chronograph:
A **Pull out the crown to position III **Pull out the crown to position III
30 60
(the watch stops).
30 60
Intermediate or interval timing