Professional Documents
Culture Documents
Aehq6357 00
Aehq6357 00
Aehq6357 00
Wheel Loader
Caterpillar introduced the first 994 in 1990 and has become the largest selling wheel loader in its size class. As the global
size class leader we have built upon its legacy of Reliability, Safety, Operator Comfort, Serviceability and Sustainability.
With the introduction of the 994H, we’ve enhanced the operator’s experience, added more safety and optimized machine
performance reducing your cost per ton. With four available linkage configurations this machine can be configured to
your application pass matching fleets of 785, 789 and 793 trucks.
Engine Transmission
®
Engine Model Cat 3516B HD EUI Transmission Type Cat planetary power shift
Rated Speed 1,600 rpm Forward 1 7.7 km/h 4.8 mph
Gross Power – SAE J1995 1176 kW 1,577 hp Forward 2 13.4 km/h 8.3 mph
Net Power – EEC 80/1269 1092 kW 1,463 hp Forward 3 22.5 km/h 14 mph
Net Power – ISO 9249 1092 kW 1,463 hp Reverse 1 8.5 km/h 5.3 mph
Net Power – SAE J1349 1079 kW 1,447 hp Reverse 2 13.2 km/h 8.2 mph
Bore 170 mm 6.7 in Reverse 3 24.8 km/h 15.4 mph
Stroke 215 mm 8.5 in Direct Drive – Forward 1 Lock-up disabled
Displacement 78 L 4,875 in3 Direct Drive – Forward 2 13.7 km/h 8.5 mph
Peak Torque @ 1,100 rpm 8499 N•m 6,289 lb ft Direct Drive – Forward 3 24 km/h 14.9 mph
Torque Rise 32% Direct Drive – Reverse 1 8.5 km/h 5.3 mph
• Net power advertised is the power available at the flywheel when Direct Drive – Reverse 2 13.5 km/h 8.4 mph
the engine is equipped with fan, air cleaner, muffler, and Direct Drive – Reverse 3 25.6 km/h 16 mph
alternator.
• Travel speeds based on two percent rolling resistance and
• Net torque rise meets SAE J139.
53.5/85-57 tires in converter drive.
• No engine derating required up to 3050 m (10,000 ft) altitude.
2
994H Wheel Loader Specifications
3
994H Wheel Loader Specifications
Dimensions
All dimensions are approximate.
10
7
9
1
2 8
3
4
5
6
11 12
13
4
994H Wheel Loader Specifications
(§) Specifications rating conform to all applicable standards recommended by the Society of Automotive Engineers. SAE standard J732c governs loader ratings
and is denoted in the chart by (§).
* Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standard specifies the cutting edge.
** Static tipping load and operating weight shown are based on standard machine configuration with 53.5/85-57 tires, full fuel tank, coolant and lubricants.
*** Measured 102 mm (4 in) behind tip of cutting edge with the bucket hinge pin as pivot point in accordance with SAE J732c.
5
994H Wheel Loader Specifications
Dimensional changes
50/80-57 52/80-57 55/80R57 53.5/85-57 58/85-57
Dump clearance at full lift mm –136 –143 –89 0 +17
and 45° discharge in –5 –6 –4 0 +0.7
Reach at full lift and mm +118 +143 +68 0 –15
45° discharge in +5 +6 +3 0 –0.6
Reach with lift arms mm +118 +143 +68 0 –15
horizontal and bucket level in +5 +6 +3 0 –0.6
Digging depth mm +136 +143 +89 0 –17
in +5 +6 +4 0 –0.7
Overall length mm +105 +111 +70 0 –12
in +4 +4 +3 0 –0.5
Overall height with bucket mm –136 –143 –89 0 +17
at full raise in –5 –6 –4 0 +0.67
Total width over tires mm 5305 5302 5509 5460 5524
in 209 209 217 214 217
Weight changes
50/80-57 52/80-57 55/80R57 53.5/85-57 58/85-57
Static tipping load straight kg –4234 –3339 +50 0 +327
lb –9,334 –7,361 +110 0 +721
Static tipping load at full 40° turn kg –3738 –2953 +44 0 +285
lb –8,241 –6,510 +97 0 +628
Operating weight kg –5388 –4256 +64 0 +416
lb –11,878 –9,383 +141 0 +917
6
994H Wheel Loader Specifications
(§) Specifications rating conform to all applicable standards recommended by the Society of Automotive Engineers. SAE standard J732c governs loader ratings
and is denoted in the chart by (§).
* Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standard specifies the cutting edge.
** Static tipping load and operating weight shown are based on standard machine configuration with 53.5/85-57 tires, full fuel tank, coolant and lubricants.
*** Measured 102 mm (4 in) behind tip of cutting edge with the bucket hinge pin as pivot point in accordance with SAE J732c.
7
994H Wheel Loader Specifications
Dimensional changes
50/80-57 52/80-57 55/80R57 53.5/85-57 58/85-57
Dump clearance at full lift mm –136 –143 –89 0 +17
and 45° discharge in –5 –6 –3.5 0 +0.7
Reach at full lift and mm +118 +143 +68 0 –15
45° discharge in +5 +6 +3 0 –0.6
Reach with lift arms mm +118 +143 +68 0 –15
horizontal and bucket level in +5 +6 +3 0 –0.6
Digging depth mm +136 +143 +89 0 –17
in +5 +6 +4 0 –0.7
Overall length mm +90 +94 +59 0 –12
in +4 +4 +2 0 –0.5
Overall height with bucket mm –136 –143 –89 0 +17
at full raise in –5 –6 –4 0 +0.7
Total width over tires mm 5305 5302 5509 5460 5524
in 209 209 217 214 217
Weight changes
50/80-57 52/80-57 55/80R57 53.5/85-57 58/85-57
Static tipping load straight kg –3643 –2878 +43 0 +281
lb –8,031 –6,344 +95 0 +620
Static tipping load at full 40° turn kg –3217 –2541 +38 0 +248
lb –7,092 –5,602 +84 0 +548
Operating weight kg –5388 –4256 +64 0 +416
lb –11,878 –9,383 +141 0 +917
8
994H Wheel Loader Specifications
(§) Specifications rating conform to all applicable standards recommended by the Society of Automotive Engineers. SAE standard J732c governs loader ratings
and is denoted in the chart by (§).
* Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standard specifies the cutting edge.
** Static tipping load and operating weight shown are based on standard machine configuration with 53.5/85-57 tires, full fuel tank, coolant and lubricants.
*** Measured 102 mm (4 in) behind tip of cutting edge with the bucket hinge pin as pivot point in accordance with SAE J732c.
9
994H Wheel Loader Specifications
(§) Specifications rating conform to all applicable standards recommended by the Society of Automotive Engineers. SAE standard J732c governs loader ratings
and is denoted in the chart by (§).
* Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standard specifies the cutting edge.
** Static tipping load and operating weight shown are based on standard machine configuration with 53.5/85-57 tires, full fuel tank, coolant and lubricants.
*** Measured 102 mm (4 in) behind tip of cutting edge with the bucket hinge pin as pivot point in accordance with SAE J732c.
10
994H Wheel Loader Specifications
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
ELECTRICAL POWER TRAIN
Alarm, back-up Brakes, oil-cooled, multi-disc, service/secondary
Alternator, dual 80 amp Case drain fi lters
Batteries, dry Crankcase guard
Converter, 10/15 amp, 24V to 12V Driveline parking brake
Lighting system (halogen, work lights, access and service Engine, 3516B HD EUI (SCAC) diesel, turbocharged/aftercooled
platform lighting) Engine Prelube
HID work lights Fuel priming pump (electric)
Starting and charging system, 24V Ground level engine shutoff
Starter emergency start receptacle Precleaner, engine air intake (above hood)
Starter lockout in bumper Radiator, Next Generation Modular (NGMR)
Transmission lockout in bumper Power train oil coolers (2) air to oil, (2) water to oil
Secondary steering
OPERATOR ENVIRONMENT Starting aid, ether, automatic
Advisor Display, displays real time operating information, Throttle lock, electronic
performs calibrations, and customizes operator settings. Torque converter, Impeller Clutch (ICTC)
Air conditioner with LUC, Rimpull Control System
Cat Detect Vision, rear vision camera system Transmission, planetary powershift, 3F/3R electronic control
Cab, sound suppressed and pressurized, separate external
rollover protective structure (ROPS/FOPS) radio ready for OTHER
entertainment, includes antenna, speakers and converter Air tank, ECC compliant (EN286)
(12-volt 5-amp) and power port Air line dryer
Cigar lighter, ashtray Automatic bucket lift kickout/positioner
Coat hook Automatic lubrication system
Controls, lift and tilt function Base machine price includes a rim allowance
Heater, defroster Blower fan
Horn, air Couplings, Cat O-ring face seals
Instrumentation, gauges Doors, service access (locking)
Coolant temperature Ecology drains for engine, radiator, hydraulic tank,
Engine hour meter steering and brake tank, and brake cooling tank
Hydraulic oil temperature Engine oil change system, high speed, Wiggins
Power train oil temperature Fast fi ll fuel system (Shaw-Aero)
Light, cab, dome Front walkway
Lunchbox, beverage holders Fuel tank, 3833 L (1,013 gal)
Mirrors, rearview (externally mounted) Hitch, drawbar with pin
Rimpull Control System Hoses, Cat XT™
Sun screen Hydraulic, steering and brake fi ltration/screening system
Seat, Cat Comfort (cloth), air suspension, six-way adjustable Mufflers (4)
Seat, trainer with lap belt, 76 mm (3 in) wide Oil sampling valves
Seat belt, retractable, 76 mm (3 in) wide Premixed 50% concentration of extended life coolant
STIC Control System with freeze protection to –34° C (–29° F)
Tinted glass Rear access to cab and service platform
Transmission gear indicator Steering, load sensing
Vital Information Management System (VIMS) with Advisor Supplemental steering system
Display: External Data Port, Customizable operator profi les, Toe kicks
Cycle Timer, Integrated Payload Control System Vandalism protection caplocks
Wet-Arm wipers/washers (front and rear) Wiggins Service Center
Intermittent front and rear wipers
11
994H Wheel Loader
Optional Equipment
With approximate changes in operating weights. Optional equipment may vary. Consult your Cat dealer for specifics.
POWER TRAIN MACHINE CONTROL AND GUIDANCE
–50° C (–58° F) antifreeze Computer Aided Earthmoving System (CAES) ready
Engine oil renewal system
Turbine precleaner SPARE RIMS
Rockford radiator fan 914 mm (36") spare rim
1118 mm (44") spare rim
ELECTRICAL 1194 mm (47") spare rim
LED warning strobes
Power converter MISCELLANEOUS ATTACHMENTS
Front and rear roading fenders
OPERATOR ENVIRONMENT
Cab precleaner
AM/FM/CD/MP3 radio
Satellite Sirrus radio with bluetooth
Mandatory Attachments
Select one from each group. Mandatory and optional equipment may vary. Consult your Cat dealer for specifics.
LINKAGE OPERATOR ENVIRONMENT
Standard Standard glass
High Rubber mounted glass
Extended High
Standard seat
Super High
Heated seat
STARTING SYSTEM Standard mirror
Ingersoll Rand air start Heated mirror
TDI air start
Electric start Access steps
Vision Display
ELECTRICAL
Cat Detect (Object Detection)
No Product Link
Product Link (Satellite) FUEL SYSTEM
Fuel line heater delete
Cold weather starting
RIMS
914 mm (36") (36×57)
1118 mm (44") (44×57)
1194 mm (47") (47×57)
For more complete information on Cat products, dealer services, and industry solutions, AEHQ6357
visit us on the web at www.cat.com.
July 2011
© 2011 Caterpillar Inc.
All Rights Reserved.