Professional Documents
Culture Documents
Oracle - Actualtests.1z0 133.v2017!07!11.by - Avgphim.67q
Oracle - Actualtests.1z0 133.v2017!07!11.by - Avgphim.67q
Number: 1z0-133
Passing Score: 800
Time Limit: 120 min
File Version: 7.9
http://www.gratisexam.com/
1z0-133
http://www.gratisexam.com/
Экзамен A
QUESTION 1
You configure a data source with a non XA driver because your (non-Oracle) database does not provide XA drivers.
The data source will sometimes participate in global transactions with an EJB, so as you configure the data source you select "Supports Global Transactions" and
One-phase commit.
Why is this configuration wrong?
A. You must choose an XA driver when a data source participates In global transactions.
B. "One' Phase Commit" always returns "ready" during phase one of the two-phase commit process' so it is possible you will have heuristic errors in the database.
C. "One-Phase Commit" processes this data source last In the global transactions, if the EJB must go last, you cannot use this configuration.
D. "One-Phase Commit" only allows this data source to participate in global transaction, so you cannot have a global transaction that includes an EJB.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 2
When creating a dynamic cluster, you have multiple options concerning how dynamic servers are. Which of the following are valid options?
http://www.gratisexam.com/
QUESTION 3
Which action should you take to automatically back up the domain configuration when anyone Activates a configuration change?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: http://docs.oracle.com/cd/E13209_01/wlcp/wlng40/restore/domain_backup.html (enabling automatic configuration backups)
QUESTION 4
As the technical lead for your project, you have been asked to recommend a new solution to handle frequently increasing loads on your applications. The Weblogic
12.1.2 domain currently runs with two clusters of three servers with request being filtered and passed by a proxy server that users the round robin algorithm.
However, the load sometimes exceeds the maximum capacity of all these servers combined but your domain lacks in scalability.
What is the best implementation solution?
A. Add a third cluster and spread existing server instances across the clusters.
B. Modify the proxy server load balancing algorithm to weight based.
C. Configure dynamic clusters and specify the number of server instances you anticipate at needing at peak load.
D. Tune work managers to optimize work.
E. Replace the software load balancer with a hardware load balancer.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 5
All administrators that deal with the production domain in your organization are extremely experienced. As the lead administrator, you have been asked to change
the administration console preferences for all administrators so that inline help no longer displays, since no one needs It.
Select the true statement about this scenario.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Valid.
QUESTION 6
You are using WebLogic Server Diagnostic Framework (WLDF) Instrumentation in a system diagnostic module. The Dye Injection monitor is enabled. You know the
diagnostic context ID of the request you are Interested in that was processed by several. You are looking through the messages in the server log file of several.
A. You need to look at the Events Data Archive. Server log files do not contain WL DF context IDs
B. You need to look at the Harvested Data Archive. Server log files do not contain WL DF context IDs.
C. You need to look at the domain log file. Only the domain log file contains WL DF context IDs.
D. You can search the server log file for the context ID. Any message that was written to the log IDs during that request will contain the context ID.
E. You need to translate the context ID Into the corresponding transaction ID, which is the only ID in server log file entries.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 7
Your server includes an application that users a generic JDBC data source to connect to a database. However, the network connection between the server and the
database is not 100%reliable.
Identify two data source attributes that, if set properly can help avoid situations in which the application fails due to a failed JDBC connection.
http://www.gratisexam.com/
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
Reference: http://docs.oracle.com/middleware/1213/wls/JDBCA/ds_tuning.htm
QUESTION 8
Which three tasks can be performed by the Node Manager?
A. Start a server
B. Define a new server
C. Host the Node Manager console.
D. Automatically restart a failed server.
E. Kill a failed application on a server.
F. Kill a server process that did not shut down property.
Explanation/Reference:
Reference: http://docs.oracle.com/cd/E13222_01/wls/docs81b/adminguide/nodemgr.html
QUESTION 9
You created a shutdown class Myclass that you would like to execute just before server shutdown.
Which statement is true regarding Myclass?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 10
Consider an existing nondynamic cluster that is currently hosting many libraries, applications, and data sources. You need to scale out this cluster to include a new
server. You provision the domain on new machines.
What are the two ways to create this new server in the domain configuration?
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 11
You need to take a web application offline.
Which three options are supported In WebLogic Server when you stop a running application?
Explanation/Reference:
QUESTION 12
You use a web browser to log in to a application that is deployed to WebLogic server. When you click a link named "publish" on the site, an Access Denied"
message appears.
Which two statements are true about this server's security configuration?
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 13
As part of troubleshooting an application, you need to analyze the HTTP session count and the server heap size over the past six hours. You are using the
Administration console. You want to view both metrics together and correlate their values.
Explanation/Reference:
QUESTION 14
An application fails. The exception Indicates that the JDEM data source cannot be found. Identify two possible steps that you can perform to verify the data source's
availability.
http://www.gratisexam.com/
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 15
Which three statements are true about the default behavior of WebLogic server proxy plug-ins?
A. The proxy will pin a client to a specific server if a session cookie is created.
B. The proxy fails over to another server if a connection or request times out.
C. The proxy distributes requests to cluster members based on their CPU usage.
D. The proxy dynamically learns the latest locations of cluster members.
E. The proxy always uses SSL, regardless of the client's protocol.
F. The proxy replicates session data to its backup proxy.
Explanation/Reference:
QUESTION 16
Each domain has a directory called servers that contains subdirectories for each server in the domain.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 17
Identify two reasons for defining machines and assigning servers to them in WebLogic servers.
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 18
You want to configure WebLogic server transactions to be recoverable when a nonclustered managed server crashes, even if that crash is caused by an
unrecoverable hardware failure. You want to run the managed server on different hardware, and have it recover the transactions that were in-progress at the time of
the crash.
You also want to use the default store for transaction logs.
Which statement is true?
A. This scenario is not possible .You must use the JDBC store to recover transactions from a crashed server.
B. This scenario is not possible. You must use clustered managed servers to recover transactions from a crashed server.
C. This scenario is common , and so the default configuration of the default store works.
D. Before the crash ,you need to update the path to the default store for the managed server. The path should be to some shared storage location.
E. After the crash, obtain a copy of the managed server's default store from the administration server. Move it to the same relative location on the new
hardware before starting the managed server there.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Absolutely Correct.
QUESTION 19
To support a growing application workload, you need to scale out an existing (nondynamic) cluster. You power up the new hardware and install WebLogic server.
Which two changes are mandatory for you to make to your domain configuration?
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 20
Select the two true statements about upgrading WebLogic server to version 12c (12.12).
A. To use the Reconfiguration Wizard, your current WebLogic server version must be 9.0 or higher.
B. The Domain Upgrade Wizard is no longer available in 12.1.2.
C. After running the wizard to update your domain ,you must reapply your start script customizations.
D. You need to update the domain's administration server files.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 21
A WebLogic server (WLS) domain was recently updated from WLS 10.3.6 to WLS 12.12.
What is the mode of operation of the Node Manager after the update and what is needed to keep the same behavior as in WLS 10.3.6?
A. Nothing, Node Manager runs and behaves the same on both WLS versions
B. Node Manager runs in "per machine" mode and nothing is needed to keep the same behavior.
C. Node manager runs in "per domain" mode and requires manual steps to return to the "per machine" mode, used in WLS10.3.6.
D. Node Manager mode of operating and behavior can be selected in reconfiguration Wizard.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 22
Which three statements about patching Web Logic server (WLS) by using Opatch are true?
A. Each patch comes with a "read me" file containing installation instructions.
B. You can use Opatch to see which patches are currently applied to WebLogic server.
C. Opatch is a GUI tool and requires the operating system to have a window manager.
D. Opatch requires a JDK to run.
E. After installing WLS, you download the Opath utility from Oracle support.
F. Each patch ZIP file comes with the Opatch utility.
Explanation/Reference:
QUESTION 23
You are carrying out the RDBMS Security Store configuration using the configuration Wizard Which three actions can you perform with the Configuration Wizard
during the process?
http://www.gratisexam.com/
Explanation/Reference:
QUESTION 24
GridLink data sources are designed for use with an Oracle RAC database. By using the Fast Connection Failover (FCF) pattern, GridLink data sources can quickly
react when a RAC node goes down.
A. The Oracle Notification service is used to notify the data source of changes to RAC nodes.
B. The reaction is quick, because in using FCF all network timeouts are set very low.
C. FCF is faster because it polls and tests connection, freeing the data source from these tasks.
D. FCF requires the use and configuration of a database server in the GridLink data source.
E. You can use any Oracle Thin database driver with a GridLink data source.
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 25
You use the administration console to start a managed server. Select the three statements that must be true.
Explanation/Reference:
Reference:
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/startstop/StartManagedServe rsFromTheAdministrationConsole.html
QUESTION 26
Which two statements are true about WebLogic data sources?
A. Data sources are targeted to a domain.
B. Data sources are bound in the JNDI tree of a server.
C. Data sources are based on the JMS specification.
D. A data source contains a connection pool.
E. A domain requires at least one data source.
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 27
You are in the process of planning a deployment in which a single WebLogic cluster will host a web application. There are several options to consider.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 28
You shut down a managed server by using the administration console.
Which statement is always true?
A. The managed server was running on the same machine as the administration server.
B. Node Manager is configured properly and running on the managed server's machine.
C. You can choose to shut down the server right away or after it completes its work.
D. The administration console calls WLST to accomplish the shutdown.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 29
A new machine was given to your department. This machine has two WebLogic server12.1.2 installation, each with different inventories.
Which command or tool do you determine the differences in products installed in each of the inventories?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 30
You are creating a domain by using the configuration Wizard. In the wizard, you select to configure Node Manager. Under "Node Manager Type, you select "Manual
Node Manager setup".
A. You are using the configuration Wizard to configure a script based Node Manager.
B. The configuration Wizard prompts you to change the default Node Manager configuration values.
C. The configuration Wizard bypasses all Node Manager configuration.
D. You are using the configuration Wizard to configure a Java based Node Manager.
E. You must manually copy the Node Manager files generated by the configuration Wizard into Node Manager home.
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
QUESTION 31
You need to monitor the HTTP session count for a running web application.
Explanation/Reference:
QUESTION 32
You create a new Work Manager to control how server threads are allocated to an application's increasing requests . You want to further configure the criteria of the
Work manager by using a Request class.
Identify three valid Request classes that you can to a work manager.
Explanation/Reference:
Reference: http://www.itbuzzpress.com/weblogic-tutorials/weblogic-pools- configuration/creating-request-class-for-your-workmanagers.html
QUESTION 33
You want to start the managed server calledmanaged1 in "Standby" mode, to keep it as a "hot backup".
http://www.gratisexam.com/
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 34
You require high availability for HTTP sessions in a web application. In addition, you have the following constraints:
· There is little free memory on the machines hosting the cluster. · HA must be guaranteed even when multiple machines fall simultaneously. · You are not
allowed to update the production databases schema.
A. Database persistence
B. File persistence
C. In-memory replication
D. Whole server migration
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 35
Examine the partial server log entry shown below:
#### <May 19,2013 8:28:01 PM EDT > <warning> <JDBC > <host01> <managed1> <<WLS kernel >> < > < > < 1369013281005 > <BEA-001129> <Received
exception while creating connection for pool -oracleDS1->
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 36
You are responsible for configure a WebLogic domain to support an order processing application. This application will communicate with multiple JDBBC data
sources to fulfill each customer order. To maintain data integrity across these databases, work will be performed within a global transaction. However, you have
learned that one of the data sources in the transaction does not have an XA driver.
Which option should you select on this non-XA data source to ensure that orders are still processed as global transactions?
A. Ignore Heuristics
B. Pinned to Thread
C. One phase commit
D. Logging connections on Resource
E. Test connection on Reserve
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 37
View the following file excerpt, which configures HTTP session replication:
A. Weblogic application.xm1
B. Weblogic-xm1
C. Session-xm1
D. Config-xm1
E. 0 Web.xm1
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Answer is still valid.
QUESTION 38
You set up two network channels for server to-server communication. You want channel x to be used more than channel Y, so you give channel x a higher channel
Weight. You want to see if indeed channel X is used more.
You use the administration console and look at both channels under each one's Monitoring tab. What scenario would best assure you that channel x has an overall
higher connection rate?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 39
Consider a domain with an existing JDBC data source, which connects to an Oracle database. Your database administrator requests that the JDBC connections to
this database now specify a different username.
Which data source attribute would you modify to implement this requirement?
A. Properties
B. Credentials
C. Username
D. Login
E. URL
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 40
The Administration Server of a domain falls due to a hardware failure. The hardware is beyond repair.
Before the failure you prepared a "backup admin server". You go through your planned recovery process and are successful. The Administration Server is now
running on different hardware. The managed servers of the domain automatically reconnect to the admin server.
A. Files of deployed applications are available to the backup admin server from the same relative location as they were to the original admin server.
B. At the time of the failure ,the backup admin server was running in "Standby" mode on different hardware in the same network.
C. When the admin server failed, you must have shut down and restarted the managed servers, otherwise they could not have reconnected to the failed
admin server.
D. The backup admin server is any one of the running managed servers. You select one of the managed servers, stop it, set its "administration" flag, and restart
it as the admin server of the domain.
E. The backup admin server must be running at the same DNS name or IP address as the original.
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 41
You use the Administration console to modify the domain's security realm. After deleting the default authentication provider, you add a single authentication provider
for iplanet LDAP. You then try to reboot your servers with the weblogic user but they all fail to start due to authentication errors.
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 42
You create a new Managed Server in your domain by using the administration console. You give it the listen address of 192.0.2.0 and the listen port of 7100.You
save and activate the changes.
You use the domain start script to start the new server. It fails, One of the messages in the window in which you can the script is:
Server failed to bind to any unable port.
You investigate and see that another process is running on 192.0.2.0 on port 7100.You also find many unused ports at that IP address.
A. It is not an instance of WebLogic Server from this domain running at 192.0.2.0:7100.The administration console does not allow you to create a server at
the same listen address and port as one already configuration in the domain.
B. It is an instance of WebLogic Server running at 192.0.2.0:7100. Other processes do not interfere with WebLogic Server.
C. Changes the port number to an unused one to resolve this issue.
D. It cannot be the administration server running at 192.0.2.:7100, because admin servers run on port 7001.
E. Because this Managed Server has never been started, it does not have a local copy of the configuration. If it did, by using Managed Server Independence,
it would be able to switch to an unused port of it s configured port was busy.
F. The port number can stay 7100 if this machine has another IP address and the port is unused at that address.
Correct Answer: CF
Section: (none)
Explanation
Explanation/Reference:
QUESTION 43
Which two statements are true about multicast communication within a cluster?
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 44
Which three runtime metrics can you monitor or collect from WebLogic Server applications?
Explanation/Reference:
QUESTION 45
You zipped up the domain's config directory on the administration server's machine before making some major configuration changes. You wait to activate after all
the changes have been saved. After your changes are in, hinges start failing badly. You want to go back to the old configuration.
http://www.gratisexam.com/
A. Undo the changes you made manually by using the administration console or WLST.
B. 1. Stop the administration server.
2. Replace the config directory on the administration server's machine with your backup.
3. Restart the administration server.
4. Stop the managed servers on each machine.
5. Replace the config directory on the machine with your backup.
6. Restart the managed servers on the machine.
C. 1. Stop the administration server.
2. Extract only the config.xm1 file from the zip file.
3. Overwrite config.xm1 on the administration server's machine with this extracted file.
4. Restart the administration server.
D. 1. Stop the administration server.
2. Replace the config directory on the administration server's machine with your backup.
3. Restart the administration server.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 46
Several applications are deployed to a managed server. You want to compare the number of completed requests for all of these applications.
A. Launch WLST and run the viewAppRuntimes ( ) command.
B. Access the Monitoring Dashboard. Click the Administration Work Managers view for the managed server.
C. Access the Administration Console. Click Monitoring > Work Manager tab for each application.
D. Access the Administration Console. Click the Deployments page.
E. Run weblogic.Deployer with the status parameter.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 47
You decide to use a database to store WebLogic Server transaction logs for a managed server.
A. Under the managed server's Services configuration select "JDBC" as the type for the transaction log store.
B. Under the managed server's Services configuration, select "Disable the Default Store
C. Create a non XA data source in the domain for the database transaction log.
D. Create an XA data source in the domain for the database transaction log.
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 48
Which session persistence type is invalid?
A. Async_replicated
B. async_jdbc
C. replicated
D. async_memory
E. cookie
F. file
G. replicated_if_clustered
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 49
An administrate in your organization says you do not need to back up the domain files on a machine which only managed servers run.
A. This Is true because the domain files can be re created with the pack and unpack utilities.
B. This is true (with an exception) because the domain files can be re-created with the pack and unpack utilities. The exception is if your security realm uses
the embedded ldap system. Which is not included in the JAR file created by the pack utility.
C. This is true (with an exception) because the domain files can be re-created with the pack and unpack utilities. The exception is for applications that are
deployed to the managed server. Those files are not included in the JAR file created by the pack utility. If you back those up manually, then pack and unpack
can be used.
D. This is not true. You need to back up the domain files on a machine on which only managed servers run by using operating system commands (such as tar
or zip).
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 50
Which statement is true about stopping Node Manager?
A. If you stop Node Manager, the managed servers it started will also stop.
B. You may kill the Node Manager process by using operating system commands.
C. Using the stopNodeManager.sh script so Node Manager stops gradually.
D. Using the administration console, select the appropriate machine and click stop.
E. The administration server goes into ADMIN mode if it can no longer Communicate with Node Manager.
F. The managed servers that Nod Manager started go into ADMIN mode if they can no longer communicate with Node Manager.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: http://docs.oracle.com/cd/E13222_01/wls/docs70/admin_domain/nodemgr.html (configuring node manager)
QUESTION 51
You are deploying a web application called inventory, war. It has been installed and has the state of "prepared". It is targeted to the Managed server named
managed1.The web application' context root is /inventory and the starting page is index .jap.
However ,you want to test the application before allowing end users access to it. In the administration console, you select inventory. war, and then select Start and
"servicing only administration request."
In you web browser, you need to enter a host and port followed by /inventory /index.jap.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 52
A web application is configured for in-memory replication and is deployed to a cluster. This cluster is distributed across two buildings on a university campus. For
performance reasons, you requires that session replication occur within the building whenever possible.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 53
You need to configure WebLogic Server to satisfy the needs of your new application that will update more than one data set on several databases in the same
transaction.
A. Enable use xa Data source interface in the transaction properties of each data source.
B. WebLogic Server supports distributed transactions by default, so on specific settings are required.
C. Split the transaction into multiple local transactions.
D. Configure your data sources with the available XA-compliant driver for your DBMS.
E. Enable Two-phase commit in each data source.
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
QUESTION 54
During a performance test, a server's log includes several out of memory error messages. You are using the Administration console.
How can you verify the amount of available heap in the server?
Explanation/Reference:
QUESTION 55
You domain's security realm has two authentication provides :1dap1 and 1dap2.
A. Required
B. Requisite
C. Sufficient
D. Optional
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 56
Which machines can be configured by using the configuration Wizard?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference:
http://docs.oracle.com/cd/E23943_01/web.1111/e14140/configuration_screens.htm#CIHBHBGE
QUESTION 57
Before you view JVM performance information in the administration console, you want to request that the JVM do a garbage collection.
http://www.gratisexam.com/
A. You cannot do this from the admin console. You must use WLST or a JVM command- line tool.
B. In the Monitoring > Performance tab, click Dump thread Stacks.
C. In the Monitoring > Threads tab, click Dump thread Stacks,
D. In the Monitoring - Performance tab, click Garbage Collect.
E. In the Monitoring > Performance tab, click GC.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 58
In the certification matrix for your version of WebLogic Server , you find the row for your database and its version. In that row, in the "type of database use" column,
it says "application data access only".
Explanation/Reference:
QUESTION 59
Consider a domain that includes a dynamic cluster of three servers. Your network administrator requires all servers to bind the specific domain name
mycompany.com.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 60
You see a script called start WebLogic.sh(.cmd in Windows) in the root folder of your domain.
A. Starts a machine
B. Starts Node Manager
C. Starts a Managed server
D. Calls the startwebLogic.sh script in the domain's bin directory
E. Calls the startManagedWebLogic.sh script in the domains bin directory
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: http://docs.oracle.com/cd/E13222_01/wls/docs70/adminguide/startstop.html
QUESTION 61
A WebLogic Server instance can have multiple network channel for it. Each channel for the server must have a unique combination of two element. Identify these
two elements.
A. Tunneling enabled
B. Listen address
C. Listen port
D. Listen port
E. Channel weight
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
Reference: http://books.google.com.pk/books?
id=QtE3AwAAQBAJ&pg=PA239&lpg=PA239&dq=oracle+weblogic+server+Each+channel+fo r+the+server+must+have+a+unique+combination+of+two
+element&source=bl&ots=4TjjtcVKG t&sig=9_M-
ij3eMC_hyaazaSHPS1ex3kM&hl=en&sa=X&ei=FhrpU_C4Je7B7Aap0oDoDQ&ved=0CDwQ6 AEwBA#v=onepage&q=oracle%20weblogic%20server%20Each% 20channel
%20for%20the %20server%20must%20have%20a%20unique%20combination%20of%20two %20element&f=false
QUESTION 62
A WebLogic server domain contains a dynamic cluster called "cluster1".The cluster "cluster"1 has two dynamic managed servers "server1" and "server2". There is a
need to view the inherited attribute values for "server2".
How do you view all attributes of "server2".including those inherited from the server template?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reconfirmed.it's correct.
QUESTION 63
You are troubleshooting why transactions are not being committed. After investigation, you realize that these transactions have enough time during the first phase of
the two phase commit, but not enough time during the second phase. Therefore, rather than committing, they are timing out and are being rolled back.
A. Timeout seconds
B. Abandon Timeout seconds
C. Before completion Iteration Limit
D. Checkpoint Interval seconds
E. Unregister Resource Grace period
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 64
You are using the configuration Wizard to create a new domain that will consist of a cluster of three managed servers along with an instance of WebLogic server
acting as an HTTP proxy to distribute traffic to the cluster.
Which three steps should you perform with the configuration Wizard?
Explanation/Reference:
QUESTION 65
You decide to use a database to store WebLogic Server transaction logs for a managed server.
A. Under the managed server's Services configuration, select "JDBC" as the type for the transaction log store.
B. Under the managed server's Services configuration, select "Disable the Default store."
C. Create a non-XA data source in the domain for the database transaction log
D. Create an XA data source in the domain for the database transaction log.
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
Perfectly Right Answer.
QUESTION 66
You are using the Configuration Wizard to create a now domain that will consist of a cluster of a of three managed servers along with an instance of WebLogic
server acting as HIPT proxy to distribute traffic to the cluster.
Which three steps should you perform with the Configuration Wizard?
Explanation/Reference:
Updated.
QUESTION 67
The startup of a Weblogic Server instance fails with the error message:
java.net.BindExcepttion:Address already in use
Which two methods help identify what is currently listening at the port and the Ip this server is configured to be bound to?
A. The pmap command lists all processes running with their associated port member.
B. The UNIX 1sof command can report information on the process that is listening at a particular IP and port.
C. netstat, which is available on Windows and Linux/UNIX, can report on the process bound to this IP and port.
D. Pstat will report detailed runtime statistics on any process currently listening at this IP and port.
E. The Linux port watching tool port info can raise an alert anytime a process attempts. succeeds, or fails to connect to a specific IP and port. It can also be used
to identify if a port is being used by a java process.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
http://www.gratisexam.com/