Professional Documents
Culture Documents
Ultrasonic Polisher SHEENUS Neo: Advanced Polishing Performance
Ultrasonic Polisher SHEENUS Neo: Advanced Polishing Performance
Electrically Driven
and polishing processes. No Vibration on Your Hand
Sensitive control to tool tip feedback to insure
professional results.
Air Driven
Power and Comfort for
Polishing Professionals
on
22.5 KHz
ROTUS ROTUS
Oscillaetincy
Hz
IMPULSE IMPULSE
Frequ K
.5
PRESTO PRESTO
Max. O
P o w e r
utput
45 w ion
lat y
cil uenc
22
Max. 40 µm
s
on O eq
Ultrasonic
Ultrasonic
Oscillati Fr
Stroke
SHEENUS SHEENUS
neo neo
SONIC SONIC
CUTTER CUTTER
Polishing die and mold Polishing ribs and small area of parts Mirror finishing of carbide parts
General Parts
General Parts
GENERAL GENERAL
PARTS PARTS
CAUTION CAUTION
Tool : Ceramic Fiber Grindstone Tool : Electroplated Diamond File Tool : Diamond Compounds
P.75 P.75 Please see the NAKANISHI “TOOLS” Catalog
Digital Display Function Various Exclusive Tools Wood Lapping Tip P.75
Exclusive Tools
Exclusive Tools
Deburring difficult areas such as
The digital power display eliminate over polishing. Exclusive Tools P.75 Polishing a deep and wide surface complicated Shape
~ 76
P. 55 P. 56
SHEENUS neo
Electrically Driven
Code
DISCONTINUED
No. 8095 Model NE240 230V ③ Vibration ON/OFF Switch (At OFF
mode Foot Pedal can be operated)
*US-25PBS 230V(8093) AND *Please check the power source plug type (P.66). ⑧ ④ 2 Mode Display Selection Switch
(WATT/POWER)
NE240 230V(8095) ARE DISCONTINUED. Specifications ⑤ Digital Display
⑦ ⑥ Output Power Control Knob
Oscillation frequency : 22.5KHz (center frequency)
Frequency control : Homing type ⑦ Equipped with a convenient handle for
EmaxEVO EmaxEVO
Output power : UNCLAMP mode Max. 45W carrying
ESPERT ESPERT
SHEENUS neo Standard Set : CLAMP mode Max. 20W ⑧ Connector for the handpiece
Power conditioning : Continuous variable type ① ② ③ ④ ⑤ ⑥
Power Source : AC120V/230V, 50-60Hz
“SHEENUS neo” can be used for grinding, polishing and mirror finishing Dimensions : W225 x D195 x H97 mm
Air Driven
Air Driven
on a wide range of materials from aluminum dies to cemented carbide
Code
No. 8094 Model US-25PBS 120V Weight : 2.1 kg
dies. It is also perfect for plastic molds, press, casting, forging, trimming Max. Output Power 45W
and header dies.
Code
DISCONTINUED
No. 8093 Model US-25PBS 230V Standard Accessories
• Fuse AC120V (T1.6AH 250V) : 2 pcs. Digital Display Function.
This tool quickly removes hard layers of EDM deposits and polishes,
difficult areas such as complex corners and ribs.
*Please check the power source plug type (P.66). AC230V (T1.0AH 250V) : 2 pcs. 2 Mode Display Selector : “WATT”,“POWER”
Easy Touch Function Switches.
ROTUS Standard Equipment ROTUS
IMPULSE Capabilities include deburring, grinding and polishing of precision molds, IMPULSE
PRESTO
• Controller (NE240 120V / 230V) : 1 pc. PRESTO
dies electronic and ceramic components. • Ultrasonic Handpiece (US-25PB) : 1 pc.
• Included Accessories : 1 set • Tool box (plastic) : 1 pc.
• Handpiece Stand (K-274) : 1 pc. • Spanner (10 mm)
• Allen Wrench (2.5 mm) • Foot Pedal (FC-24) : 1 pc.
Ultrasonic
Ultrasonic
• Fuse AC120V (T1.6AH 250V) : 2 pcs. Ultrasonic Handpiece
/ AC230V (T1.0AH 250V) : 2 pcs.
Included Accessories (1 pc. each)
• Electroplated diamond file Flat Taper 0.4 x 4 x 50 mm #200 (60101) Code No. 8099
• Ceramic fiber grindstone Flat 1 x 6 x 50 mm #800 (60735)
US-25PB
• Tip Holder Round For ø3 mm (60902)
SHEENUS Model SHEENUS
neo • Tip Holder Flat For thickness 1 mm (60922) neo
SONIC SONIC
CUTTER CUTTER
Exclusive Tools P.75
~ 76 Specifications
Oscillator : PZT piezoelectric type
Attachment fixing : M6 screw
General Parts
General Parts
Cable length : 2 m (60 g)
Dimensions : ø16 (Max. ø28) x L134 mm
Weight : 140 g (w/o cable)
Ergonomically comfortable and light for effortless work over long periods.
Lightweight, resin body ergonomically designed to provide precise control
while operating.
GENERAL Exclusive Tools P.75 GENERAL
PARTS ~ 76 PARTS
*Tip holder and Ceramic fiber grindstone in this picture are not provided when only handpiece US-25PB is purchased.
CAUTION CAUTION
Exclusive Tools
Product Description Code No. Model Specifications
Protective Protective
Equip. Equip.
Precautions for using Nakanishi Tools Symbols used in NAKANISHI Tools Catalogue
For safe use of the tools Shank Diameter
• Please read operation manuals before using any tools. Shows shank diameter of the tools. Nakanishi produces tools with several shank diameters.
• Please keep all operation manuals on hand for reference whenever necessary. SHANK ø3.0 * Nakanishi micro grinders utilize a collet system, which insures maximum precision. Therefore, please use the collet that best
corresponds to the tool shank diameter.
Incorrect use of the tools, or ignoring ‘CAUTIONS for safety’ described in the
! Caution operating manuals, could cause fatal or serious bodily injury. Standard Package
One package is the minimum shipping unit. This number shows the number of pieces in the
Electrically Driven
Electrically Driven
10 pcs./pack standard package (bag, box and etc.). Please order the number of packages needed for the
desired quantity.
CAUTIONS
Always use safety glasses, mask, face guard Fasten the collet firmly. Maximum allowable speed
for your safety. Make sure the tool is fully installed in the collet to
EmaxEVO Do not exceed the maximum allowable tool speed. For your safety, use the tools below the EmaxEVO
ESPERT avoid tool slippage. indicated allowable speed. Start at low speed and increase gradually to insure safety. The ESPERT
20,000 min-1 preceding is particularly important for the use of new tools and machines.
* Maximum allowable speed assumes an overhang of less than 13mm. Decrease speed if the overhang is more than 13mm.
Air Driven
Air Driven
Refer to “Precautions for using Nakanishi Tools” on the next page.
Do not touch the tools when in operation. Do not use damaged or broken electric cords
Make sure the work area is neat and there is and air hoses. * Check the tools and machinery for mechanical defects prior to each use.
sufficient light.
Grit
ROTUS This shows grain size of various grinding tools. ROTUS
IMPULSE Do not use the tool where flammable liquids Start at low speed and increase gradually to IMPULSE
Rough Cutting ......................................... 46, 54, 60, 70, 80, 90
PRESTO
ス
OIL プ
レ
ー
油
or gases exist. insure safe work.
This is particularly important for the use of new
#100 Medium Cutting ...................................... 100, 120, 150, 180
Pre Finishing ........................................... 220, 240, 280, 320, 400
PRESTO
0 rpm tools, large cutting tools and elastic tools such as Finishing .................................................. 500, 600, 700, 800, 1000
Ultrasonic
Ultrasonic
rubber grindstone, sander and brush tools. Fine Finishing and Mirror Polishing......... 1200, 1500, 1800, 2000, 3000, 4000, 6000, 8000 ....
Do not leave operating tools. Keep the tools and products in a cool,
Confirm that the tool has stopped completely after dry place.
OFF
switching off.
SHEENUS SHEENUS
neo neo
SONIC SONIC
CUTTER Code
No. ~64227 End Code number on each page CUTTER
Select proper tools and products for your Check the tools carefully before use.
application. Confirm that the tools are free of chips, cracks,
General Parts
General Parts
Select tools carefully considering the performance splits, scratches, irregular bondings, and out of
of the tools, work procedure and type/shape of round shanks, etc.
the material. Code number (Order number)
Fix the work material firmly in a vise and/or Stop grinding or polishing immediately whenever
unusual sounds, vibrations, or wear are found.
Electrically Driven
other clamping fixture.
GENERAL
PARTS
Restart the work only after the problem is found GENERAL
PARTS
and corrected.
EmaxEVO
ESPERT
CAUTION
Do not wear loose clothing and/or Only use attachments, parts, consumable articles CAUTION
Air Driven
accessories that may be caught in machinery. and accessories produced by NAKANISHI.
Standard package quantity
Long hair should be secured prior to machine
operation.
Exclusive Tools
Exclusive Tools
ROTUS
IMPULSE
PRESTO
Ultrasonic
Clean the inside of the collet and tool shank, This can break and/or bend the tools. Use the tools
chips or fine metals inside the collet could cause within their design limitation. Excessive pressure will
tool slippage and result in damage to machinery decrease the efficiency of your work and cause SHEENUS
neo
EXCLUSIVE or bodily injury. excessive wear of the tools. SONIC
CUTTER Maximum allowable speed EXCLUSIVE
TOOLS TOOLS
General Parts
The tools should be used by taking care of the Decrease the speed as shown in the table below, if you are using a longer
overhang than 13 mm.
overhang and below maximum allowable speed.
Total length of the tool (mm)
INDEX 13mm The catalogue shows the maximum allowable Overhang Maximum allowable speed (min-1) INDEX
speed at 13 mm overhang (distance between the Less than 13 mm Shown in the catalogue (A) GENERAL
PARTS
face of the collet and the top of the tool shank). Less than 20 mm (A) x 0.5
Less than 25 mm (A) x 0.3
Protective Less than 50 mm (A) x 0.1 Protective
Equip. Note : Specifications may be changed without notice. Colors of the tools in this catalogue may not be the same as actual colors due to printing limitations. Equip.
P. 71 P. 72
-P073-082_tools_e_1410.qxd 14.10.14 6:36 PM ページ 73
Electrically Driven
Electrically Driven
NAKANISHI
Line up
EmaxEVO EmaxEVO
ESPERT
Air Driven
Exclusive Tools of Ultrasonic Polisher “SHEENUS neo” .............. P.75~76
Exclusive Tools of “SHEENUS neo” Exclusive Tools of “LUSTER” Exclusive Tools of “MINI-LUSTER” Exclusive Tools of “SWING-LUSTER”
(P.75~76) (P.76~78) (P.76~78) (P.76~78) Exclusive Tools of Electromotive Polisher “SWING-LUSTER” ...... P.76~78
Ultrasonic
Ultrasonic
Exclusive Tools of “50˚ & 90˚ Angle Type Attachment” ............ P.78~80
General Parts
Exclusive Tools of Exclusive Tools of Exclusive Tools of
“Angle Type Attachment” (P.78~80) “Mini Angle Type Attachment” (P.80) “FINE BELT SANDER” (P.81~82)
GENERAL GENERAL
PARTS PARTS
CAUTION CAUTION
Exclusive Tools
Exclusive Tools
EXCLUSIVE EXCLUSIVE
TOOLS TOOLS
INDEX INDEX
Protective Protective
Equip. Equip.
P. 73 P. 74
-P073-082_tools_e_1410.qxd 14.10.14 6:36 PM ページ 75
Code
No. 60101~ Code
No. ~62363
(57410)
NEO NEO
Electrically Driven
Electrically Driven
EmaxEVO EmaxEVO
ESPERT ESPERT
Air Driven
Air Driven
ROTUS ROTUS
IMPULSE IMPULSE
PRESTO PRESTO
Ultrasonic
Ultrasonic
SHEENUS SHEENUS
neo neo
SONIC SONIC
CUTTER CUTTER
General Parts
General Parts
GENERAL GENERAL
PARTS PARTS
CAUTION CAUTION
Exclusive Tools
Exclusive Tools
EXCLUSIVE EXCLUSIVE
TOOLS TOOLS
INDEX INDEX
Protective Protective
Equip. Equip.