Professional Documents
Culture Documents
Rear View Mirror Hino: Issue 1
Rear View Mirror Hino: Issue 1
Issue 1 en
Hino
Contents
Work Description Renewal of rear view mirror..................................... 3
Renewal and adjustment of mirror frame motor ...... 5
Work Description
Connectors
1 Connector
4 Fold back the rear view mirror with motor 2 Screws
as much as possible.
5 Undo the lock nut on the set screw and
screw in the set screw as much as possible.
6 Fold out the rear view mirror with motor to
its end position.
7 Screw out the set screw until it contacts the
stop heel on the mirror frame.
8 Fold in the rear view mirror. Screw out the
set screw another 1-2 turns and then secure
the set screw with the lock nut.
9 Fold out the rear view mirror and check that
the stop heel just contacts the set screw. This
is to prevent burning out the motor.
1 Set screw
2 Stop heel