Professional Documents
Culture Documents
Equipment List: Assistant Electrician (CON/Q0602)
Equipment List: Assistant Electrician (CON/Q0602)
Equipment List: Assistant Electrician (CON/Q0602)
1. Pliers Set x4
3. Hammer x4
4. Spanner x4
6. Wire strippers x4
7. Chisel x4
8. Ammeter x4
9. Megger x4
10. Wattmeter x4
11. Ohmmeter x4
12. Multimeter x4
15. Insulation tape (Red, Yellow, Blue, Green, Black colour) x30
20. Overalls x1
NSQF Level 3
Minimum Educational Qualifications Preferably 10th standard
Maximum Educational Qualifications N.A
For Non trained worker : 5 years site experience in same occupation and
Experience for Trained worker : 3 years site experience as a certified
Helper Electrician level-2
Assessment Guidelines
Applicable National Occupational Standards (NOS)
1. Criteria for assessment for each Qualification Pack will be created by the
1. CON/N0602: Select and use hand, power tools and electrical
Sector Skill Council. Each Performance Criteria (PC) will be assigned marks
devices relevant to construction electrical works proportional to its importance in NOS. SSC will also lay down proportion of
2. CON/N0603: Install temporary lighting arrangement at marks for Theory and Skills Practical for each PC.
construction sites 2. The assessment for the knowledge part will be based on knowledge bank of
questions created by Assessment Bodies subject to approval by SSC
3. CON/N0604: Install LV electrical wiring at permanent structures
3. Individual assessment agencies will create unique question papers for
4. CON/N0605: Assemble, install and maintain temporary LV knowledge/theory part for assessment of candidates as per assessment
5. electrical panels (distribution boards) at construction site criteria given below
4. Individual assessment agencies will create unique evaluations for skill practical
6. CON/N8001: Work effectively in a team to deliver desired results
for every student at each examination/training center based on assessment
at the workplace criteria.
7. CON/N8002: Plan and organize work to meet expected outcomes 5. The passing percentage for each QP will be 50%. To pass the Qualification
Pack, every trainee should score a minimum of 50% individually in each NOS.
8. CON/N9001: Work according to personal health, safety and
environment protocol at construction site 6. The Assessor shall check the final outcome of the practices while evaluating
the steps performed to achieve the final outcome.
7. The trainee shall be provided with a chance to repeat the test to correct his
procedures in case of improper performance, with a deduction of marks for
each iteration.
8. After the certain number of iteration as decided by SSC the trainee is marked
as fail, scoring zero marks for the procedure for the practical activity.
9. In case of successfully passing only certain number of NOS's, the trainee is
eligible to take subsequent assessment on the balance NOS's to pass the
Qualification Pack within the specified timeframe set by SSC.
10. Minimum duration of Assessment of each QP shall be of 4hrs/trainee.
CAREER MAP FOR CONSTRUCTION
ELECTRICAL WORKS
Supervisor - Electrical
Works
Construction Electrician - LV
MIDDLE LEVEL
Assistant Electrician
ENTRY LEVEL
Helper Electrician
TRACKS
Construction Electrical
Works