Professional Documents
Culture Documents
End-Of-Term Test: Answer Sheet
End-Of-Term Test: Answer Sheet
End-Of-Term Test: Answer Sheet
ANSWER SHEET
Mark (X) on the letter of the correct answer, circle to delete, blacken to undo your choice
1 A B C D 11 A B C D 21 A B C D 31 A B C D
2 A B C D 12 A B C D 22 A B C D 32 A B C D
3 A B C D 13 A B C D 23 A B C D 33 A B C D
4 A B C D 14 A B C D 24 A B C D 34 A B C D
5 A B C D 15 A B C D 25 A B C D 35 A B C D
6 A B C D 16 A B C D 26 A B C D 36
7 A B C D 17 A B C D 27 A B C D 37
8 A B C D 18 A B C D 28 A B C D 38
9 A B C D 19 A B C D 29 A B C D 39
10 A B C D 20 A B C D 30 A B C D 40
1
Translation
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
2
I. VOCABULARY AND STRUCTURE. Choose the best answer A, B, C or D (30x0.2m=6 marks)
3
12. Which of the following statements is incorrect?
A. A secondary cell may be recharged after use.
B. A battery consists of a cell.
C. In secondary cells, the conversion of chemical energy to electrical energy is reversible
and the cell may be used many times.
D. Primary cells cannot be recharged, and the cell cannot be used once the chemicals are
exhausted.
13. A resistor is marked with the following coloured bands: brown, black, red, silver. What is
its value and tolerance? It is ---------------.
A. 1K Ω ±10% B. 100Ω ±10% C. 1KΩ ±5% D. 100 Ω ±5%
14. A resistor of 56Ω of ±5% tolerance is required. What four band colour code does this
correspond to? -----------------
A. orange, blue, black, gold B. green, blue, black, gold
C. green, red, black, silver D. green, blue, black, silver
15. A backwards-working electric motor is best described as……………..
A. An inefficient, energy-wasting device.
B. A motor with the voltage connected the wrong way.
C. An electric generator.
D. A magnetic-field generator.
16. Which of the following sentences is not correct?
A. Fixed resistors have only one ohmic value, which cannot be changed or adjusted.
B. Variable resistors can change their value over a specific range.
C. One type of fixed resistor is the composition carbon resistor
D.A potentiometer is a variable resistor with two terminals and is used as a voltage divider.
17. The voltage in a battery is……………
A. less than the voltage in a cell of the same kind.
B. the same as the voltage in a cell of the same kind.
C. more than the voltage in a cell of the same kind.
D. always a multiple of 1.018 V.
18. Primary cells……………
A. all have exactly 1.500 V and can be used over and over.
B. have higher voltage than other types of cells.
C. cannot be recharged.
D. are made of zinc and carbon.
19. The unit symbol of acceleration is ……………
A. kg B. N C. km/h D. m/s2
20. ……………is a device which consumes electricity.
A. Load B. Fuse C. Switch D. Source
21. Materials which allow a current to pass through easily are called …………..
A. semiconductors B. conductors C. insulators D. impurities
4
22. The figure below shows the ………… diagram of the parts of a radio.
A. wiring B. schematic C. circuit D. Block
23. ……………is the current that constantly changes in amplitude and which reverses direction
at regular intervals. The amplitude of …………… is determined by the number of electrons
flowing past a point in a circuit in one second
A. Direct current/ alternating current B. Series circuit/parallel circuit
C. Alternating current/ direct current D. Parallel circuit/ series circuit
24. In a nuclear power plants, the heat is produced by the splitting of ……………
A. nucleuses B. atoms of uranium
C. shells of electrons D. chemical elements
25. ……………energy is a renewable energy source deriving from plant material and animal
waste.
A. Geothermal B. Tidal C. Biomass D. Solar
26. In a generator, electricity is generated in the stator winding through the process of
……………. in which a conductor placed in a changing magnetic field causes the production
of a voltage across the conductor.
A. four strokes B. electromagnetic induction
C. ignition D. alternation
II.READING .Read the text and choose the best answer for the questions (5x0.25m=1.25ms)
DC motor
5
A commutated DC motor has a set of rotating windings wound on an armature mounted on a rotating
shaft. The shaft also carries the commutator, a long-lasting rotary electrical switch that periodically
reverses the flow of current in the rotor windings as the shaft rotates. Thus, every brushed DC motor
has AC flowing through its rotating windings. Current flows through one or more pairs of brushes
that bear on the commutator; the brushes connect an external source of electric power to the rotating
armature.
The rotating armature consists of one or more coils of wire wound around a laminated, magnetically
"soft" ferromagnetic core. Current from the brushes flows through the commutator and one winding
of the armature, making it a temporary magnet (an electromagnet). The magnetic field produced by
the armature interacts with a stationary magnetic field produced by either permanent magnets or
another winding a field coil, as part of the motor frame. The force between the two magnetic fields
tends to rotate the motor shaft. The commutator switches power to the coils as the rotor turns,
keeping the magnetic poles of the rotor from ever fully aligning with the magnetic poles of the stator
field, so that the rotor never stops (like a compass needle does), but rather keeps rotating as long as
power is applied.
Many of the limitations of the classic commutator DC motor are due to the need for brushes to press
against the commutator. This creates friction. Sparks are created by the brushes making and breaking
circuits through the rotor coils as the brushes cross the insulating gaps between commutator sections.
Depending on the commutator design, this may include the brushes shorting together adjacent
sections – and hence coil ends – momentarily while crossing the gaps. Furthermore,
the inductance of the rotor coils causes the voltage across each to rise when its circuit is opened,
increasing the sparking of the brushes. This sparking limits the maximum speed of the machine, as
too-rapid sparking will overheat, erode, or even melt the commutator. The current density per unit
area of the brushes, in combination with their resistivity, limits the output of the motor. The making
and breaking of electric contact also generates electrical noise. Brushes eventually wear out and
require replacement, and the commutator itself is subject to wear and maintenance (on larger motors)
or replacement (on small motors). The commutator assembly on a large motor is a costly element,
requiring precision assembly of many parts. On small motors, the commutator is usually
permanently integrated into the rotor, so replacing it usually requires replacing the whole rotor.
31. Which sentence is NOT correct?
A. Armature is made up of some rotating windings and other components.
B. The function of the commutator is to change the flow of current in the rotor windings as
the shaft rotates.
C. In a commutated DC motor, there could be more than one pair of brushes.
D. The armature core is made of pure iron.
6
D. the commutator creates a magnetic field.
34. The shaft rotates because of the ……………between the two magnetic fields.
A. electromagnetic force
B. attraction
C. stationary magnet
D. permanent magnets
36. When the voltage across each coil to rise because of the inductance of the rotor coils,
…………….
A. its circuit is open.
B. the coil limits the maximum speed of the machine.
C. the spark could be generated.
D. it could generate some electrical noise.
III.CLOZE. Fill in the gaps in this description of tuned circuit shown in the figure. Each gap
represents one word. (5x0.25m=1.25 marks)
The circuit consists of a four hundred and seventy _____(36)_____ inductor which is connected in
______(37)____ with a variable capacitor. The _____(38)_____ can be varied between five and
sixty-five pico-farad. The ____(39)______ is linked to the top end of the tuner. It is also connected
7
to the positive terminal of the _____(40)_____ in the detector. The bottom end of the tuner is
connected to earth via the zero voltage supply rail.
Chuẩn đầu ra của học phần (về kiến thức) Nội dung kiểm
tra
Mô tả được dòng điện, các bộ phậnvà nguyên tắc hoạt động của Câu I (câu1-30)
máy phát điện, động cơ điện,các thiết bị điện điện tử, quy trình tháo
G1.1
ráp các linh kiện, hệ thống phân phối điện và các phương pháp tạo
năng lượng
Hiểu được các ký hiệu trên sơ đồ mạch điện đơn giản và các linh Câu I (câu1-30),
G1.2
kiện điện tử, các ký hiệu và các qui tắc an toàn lao động Câu III
Giải thích được các thuật ngữ cơ bản dùng trong ngành điện-điện Câu I (câu1-30),
G1.3
tử
Đọc hiểu, tóm tắt và dịch tài liệu kỹ thuật liên quan đến chuyên Câu II, IV
G2.1
ngành điện điện tử bằng tiếng Anh
Sử Thị Ái Mỹ