Professional Documents
Culture Documents
Amir Mohamed: Aramco For Khurais Pipeline
Amir Mohamed: Aramco For Khurais Pipeline
CAREER OBJECTIVE
Detail-oriented and thoughtful professional prepared to excel in the field of Mechanical Piping&Pipe-Stress
Engineering and contribute to organizational objectives.
PROFESSIONAL EXPERIENCE
Mechanical Engineer for Woodgroup Mustang HDP November 2015Till September 2016
Senior Mechanical Engineer for KBR LTD September 2013Till September 2015
Mechanical Design Engineer for Saudi Bin Ladin September 2012Till July 2013
Mechanical Design Engineer for Saudioger LTD September 2010 Till September 2012
Mechanical Design Engineer for Dar Al-Handassah (shair and partners) from December 2007 till
September 2010
JOB RESPONSIBILITIES
Office activity:
Review of P&ID & preparation of Line list, Valve list, Equipment list and Specialty items list
Selection of suitable piping materials & valve types as per process requirement.
Performing Detail Engineering - Data Sheet Preparation & Approval from the customer / consultant,
Technical Bid Evaluation, Co-ordination with vendor for technical issues, Review of Drawings&Test
Certificates
Preparation of Pipe Rack header piping – list & routing
Finalization of Pipe Routing as per respective Code & Project standard
Checking & approval of Isometrics for construction (P&ID Check, Line Routing, Support Check, Special
requirement checks& BOM)
General:
Handling mechanical &piping technical queries from site
Mentor & guide 3D CAD designers
Coordination with various disciplines like equipment, instrumentation, civil, design, layoutetc.
Coordination with vendors for technical queries & clearance of all in-line components
Interpret Vendor drawings/information
Develop accurate 3D & isometric drawings by applying practical design knowledge
Review of P&ID, Layouts, GADs, Isometrics & various piping related drawings and documents.
Work Experience
Project title: Design, Selection & Procurement of all inline mechanical piping components in an EPC project
for Rehabilitation of 9 Offshore complex147 Satellites.
Project title: Yanbu Refinery (rehabilitation of 35 buildings) (Jan2014-Sept 2015)
Project title: Yanbu Refinery (Main Communication Building and substations ) (Sept 2014-April 2015)
Project title: Safaniyah GOSP (Berth Area Buildings ) (Sept 2013-Dec 2013)
Project title: Safaniyah (Offshore Platform ) (April 2014-July 2014)
Project title: Hail Bulk Plant (Greenfield Plant ) (Sept 2015-Sept 2016)
Project title: (Saudi Aramco Total Refinery SATROP) (April 2015-July 2016)
Project title: Utilities Offshore and Onshore Platforms Company (GUPCO)
Oct-2016- Aramco for Khurais Pipeline Saudi Arabia
Present
1
AMIR MOHAMED
- Conduct pipe stress engineering of Pipeline systems as per ASME, ANSI B31.4 code needs using
Caesar II software program.
- Perform evaluation of nozzle loads or vessels stress utilizing WRC 107/297 capability of Caesar II
program.
- Develop engineering computations and evaluations.
- Conduct complex engineering tasks along with key engineering work properly and efficiently.
- Ensure to extract engineering data from CAD drawings as well as computer models.
- Coordinate design of exclusive pipe supports as needed.
- Ensure to complete different assignments like drawings, parameters and varied materials apt for
procurement plus construction purposes.
- Interact frequently with various engineering disciplines and departments.
- Develop detailed requisitions for pipe stress equipments and materials.
- Review vendor drawing submittals and conduct technical bid evaluation.
- Develop and issue parameters, data sheets and varied construction documents.
- Guide technically to CAD designer or drafters and engineers working on same pipe stress project.
- Perform as advisory facility to senior management staff on engineering pertinent matters.
- Support lead pipe stress engineer to develop and review pipe reinforcement job parameters.
- Provide magnitude of hydrostatic and operating loads acting on guides and supports.
Project – 24" Ghazal-A1 Gas T/L (64 Km) Project For (ARAMCO)
Issue and review the mechanical package for this project including the following.
Hydrostatic test diagram for the pipeline and its terminals and the valve room
Nitrogen purge diagram for the pipeline
SIS –safety instruction sheet for the pipeline and its terminals and the valve
room
Line designation table for the pipeline and piping
Hazard identification list for the pipeline.
Piping plan for 24" cladded header , 8" caldded relief header and 24" scraper
launcher
Piping plan for the sectionalizing valve room
Piping plan for the tie-in to Woqr 24" existing manifold and for 24" scraper
receiver
Isometrics dwgs. For Ghazal area
Isometrics dwgs. For Woqr area
Plan & profile for the pipeline
Carrying out the initial site visit for the tie-ins locations, and sizes.
Project – Stress Analysis For 8" Crude Oil Pipeline Project For (Saudi
Cement/ ARAMCO)
Issue and review stress analysis report for the pipeline from the tie-ins to 48"and
56" existing crude oil pipelines to the metering skid. and from the metering skid to
2
AMIR MOHAMED
Project – Khurais Water Injection Wells Project (150 Water Wells) For
(ARAMCO)
Issue and review the mechanical package for each water well on this project
including the following
This project consists of 16" gas T/L 140 km from Nuayyim GOSP to GHAZAL
area,18" crude oil from Nuayyim GOSP to 24" existing P/L, 20" crude oil
Nuayyim field to Nuayyim GOSP, 12" by pass crude oil to Hawtah FCC ,
20" Water Injection P/L and 12" Water P/L.
Issue and review the mechanical package for crude oil and water in one package
and 16" gas T/L on another package including the following
3
AMIR MOHAMED
Project – Basic & Detailed Design And Engineering Of A New 150,000 Bbl Oil
Storage Tank Proposal- Petrogulf Company) – Egypt.
Project – Mellitah Oil And Gas Company Proposal for Basic & Detailed
Design for various five Projects - Libya
Project - Khalda Oil And Gas Company Proposal for Basic & Detailed Design
for Propane tank Projects - Egypt
The responsibility is to develop the followings:
The required piping man-hours to achieve the basic design and detailed design
of the Piping
Isometric drawing & bill of materials
As - built drawings of existing piping.
Piping material take off for estimation and purchasing
2008-2011
Saudioger LTD September 2010 Till September 2011
.
Project – Uthmaniah Remote Header / Trunk Line H For ARAMCO.
The Project is to design the remote header H and the trunk line H from
Uthmaniah area to Uthmaniah Manifold and the work is to prepare the
mechanical package for 16" remote header and 16" trunk line including
Hydrostatic test diagram
SIS –safety instruction sheet
Line designation table
Piping plan for the 16" remote header and 8" relief header and 4" blow down
header
Piping plan for the 16" trunk line tie-ins inside Uthmaniah manifold
Isometrics dwgs remote header area
Isometrics dwgs. Manifold area
Carrying out the initial site visit for the tie-ins location sizes and ratings
2007 – 2010 Dar Al-Handassah (shair and partners) from December 2007 till September
2010
Mechanical Design engineer
(HVAC Systems): Duct layout, duct sizing, pump selection, AHU&Chillers selection,
chilled water pipes sizing and coordination with other trades)
(Plumbing systems): selection of pumps, domestic water tanks, sizing of water,
drainage, rain water and vent, sizing for sump pit and sewage pumps, Gas pipe
sizing for kitchens, grease interceptor selection, fuel oil sizing and pump
selection, swimming pool design and selection for equipments, water fountains
selection and design, steam network design, hot water boilers network design,
Hot water sizing and selection for water heaters).
(Firefighting): selection of pumps, sizing of firefighting tanks, Hydraulic
calculation, zoning, fm200 and coordination with other trades
TECHNICAL PROFICIENCIES
Software :CAESAR II V5.2,AutoCAD 12, AutoCAD Plant 3D 2012, Microsoft Office, MATLAP, Microsoft
access, Coraldraw-12 ,front page, MS-Projects ., Cadworks( 3D Design Modelling, Assembly,
Drawing,) Software,(Isometric and PID), PDMS ( 3D Design Modelling, Structure,
Equipment, Piping and drafting Drawing,) Software, Solid Works( 3D Design Modelling,
Assembly, Drawing,) Software Pipesim
(Simulation of Pipe Phase),Shlumberger, PIPEPHASE , HYSYS7.2 ( Hydrocarbon simulation
software), PROII, CatiaV5 R16, Ansys V8.
Knowledge of Piping & Insulation thickness, Pipe rack widthcalculation,selection of materials for
construction, calculation of stress analysis, CAESAR II 5.2 & load case preparations
Conversant with international codes and standards like ASME, API, ASTM, ANSI, EN, BSetc.
Understanding of PDMS (Plot plan, Equipment layout, Pipe Rack layout and Piping layouts)
CERTIFICATION
Completed Post-Engineering specialization course inASME B31.8 For Gas Transmission Pipeline ,
Specification and codes From (ENPPI)
Completed Post-Engineering specialization course inAPI 560 From (German Lloyds)
Completed Helicopter under Water training (HUTE ) and marine Survival Training From Arab academy
For Science Technology & Maritime transportation.
Technical Project During Piping Training
Pipe line design
Welding inspection and Non Destructive test
Specification and codes
HYSYS for process modelling.
Gas Dehydration and Sweetening
Pump technology & troubleshooting
Fundamentals of mechanical Engineer
Oil & Gas Process / Facilities Fundamentals.
6
AMIR MOHAMED
ACADEMIC PROFILE
2011 Diploma of Natural gas processing from Cairo University-Mining and Petroleum Engineer division.
2007 Bachelor degree in Mechanical Engineering at Ain Shams University.
STRENGTHS AND ACCOMPLISHMENTS
Teamwork, Self-motivate
Adaptability and improvisation
Ability to achieve objectives within strict deadlines
Comprehensive problem solving attitude
Group leader, Main Project: Motivating group members, Resource & time management, fulfillment of
targeted tasks, satisfying departmental staff requirements and ensuring emotional quotient of team
members balanced.
Former member of Society of Petroleum Engineers (S.P.E.)
PERSONAL PROFILE
Permanent Address : Olaya Center , Makkah St,
P.O .Box 2526 Al-Khobar,-Saudi arabia
Date of Birth : 22thSep1985
Nationality : Egyptian
Marital status : Single
Passport Number : A14664769
Languages known : English, Arabic, (Read, write & speak)
DECLARATION
I hereby declare that the above information is true to the best of my knowledge and I bear the responsibility for
the correctness of the above mentioned particulars.