Professional Documents
Culture Documents
Halar Coating Related
Halar Coating Related
No Comments
General Information
What is Halar Coating?
What is Halar coating? Most people have no idea. Halar is actually the brand name for
ethylene chlorotrifluoroethylene, or ECTFE. ECTFE is marketed as Halar by Solvay Solexis.
However, that doesn’t do much to answer the question. If you don’t know what Halar is, you
probably don’t have a clue what chlorotrifluoroethylene is, either. Here is the lowdown on
ECTFE, or Halar.
The most basic explanation for Halar is that it is a type of plastic. This particular type of
plastic known as Halar is special because it is semi-crystalline and melt-processable. There
are additional properties of Halar that make it desirable for use as an industrial coating. These
properties include:
So Halar coating is a type of plastic that is extremely resistant to high and low temperatures,
can withstand impact, and resists chemicals, corrosion, and electricity. These properties tell
us a little bit about what Halar, the material, actually is. But what does one do with Halar?
How is this special kind of plastic actually used in the world?
Halar is typically used as an industrial coating. This means that it is applied to other products
to give them protection and make them more durable. In particular, it is used to coat products
that may be exposed to high amounts of friction, because Halar will minimize the amount of
wear that the products suffer.
You can see that in the first three examples, Halar is a beneficial choice because it resists
friction. Bearings, cams, and valve seats are all exposed to high amounts of friction through
the motion involved in their function. Halar makes these parts more durable and minimizes
the wear that they suffer so that they need to be replaced less often.
Wire and cable are coated with Halar because of the electrical resistance that it offers. Halar
has high electrical resistivity and low dielectric constant, which makes it an excellent choice
for coating wire and cable.
Halar is also used frequently in the paper industry to coat pipes and scrubbers that are treated
with bleaching agents. Because Halar is very resistant to chemicals, it allows the pipes and
scrubbers to be treated and cleaned with bleach without corroding or damaging the pipes.
These are the basics on Halar, or ECTFE. If you find that you could benefit from coating a
product with Halar or another industrial coating, get in touch with Toefco Engineered
Coating Systems. At Toefco, we have been working with industrial coatings for more than 40
years. We can guide you into choosing a coating that offers all the properties that are best for
your particular application. As the market has changed and developed over the last 40 years,
we have stayed on the leading edge. We have the top of the line coatings that will give you
the best finished product possible.
To learn more about halar coatings, call us at 888-912-5921 or ask an industrial coating
engineer.
You
Thanks Sir. I had zero knowledge abt Halar.
Actions