This document provides sample problems involving calculations for various types of weirs, including:
1) Calculating the height of a weir needed to discharge a given flow rate with a maximum upstream depth.
2) Computing the discharge rate over a Cippoletti weir under a given head.
3) Finding the head on a trapezoidal weir given the discharge rate, crest length, and side slopes.
4) Determining discharge rate over a narrow-crested weir under a constant head.
This document provides sample problems involving calculations for various types of weirs, including:
1) Calculating the height of a weir needed to discharge a given flow rate with a maximum upstream depth.
2) Computing the discharge rate over a Cippoletti weir under a given head.
3) Finding the head on a trapezoidal weir given the discharge rate, crest length, and side slopes.
4) Determining discharge rate over a narrow-crested weir under a constant head.
This document provides sample problems involving calculations for various types of weirs, including:
1) Calculating the height of a weir needed to discharge a given flow rate with a maximum upstream depth.
2) Computing the discharge rate over a Cippoletti weir under a given head.
3) Finding the head on a trapezoidal weir given the discharge rate, crest length, and side slopes.
4) Determining discharge rate over a narrow-crested weir under a constant head.
A weir of 8m long is to be built across a rectangular channel to
discharge a flow of 9m3 /s. If the maximum depth of water on the upstream side of weir is to be 2m, what should be the height of the weir ? Adopt Cd = 0.62. Water is flowing over a Cippoletti weir of 4 meters long under a head of 1 meter. Compute the discharge, if the coefficient of discharge for the weir is 0.6. The discharge over a trapezoidal weir is 1.315 m3/s. The crest length is 2m and the sides are inclined at 75057’49” with the horizontal. Find the head on the weir in meters. A narrow-crested weir of 10 meters long is discharging water under a constant head of 400 mm. Find discharge over the weir in liters/s. Assume coefficient of discharge as 0.623. A rectangular sharp-crested weir is to be constructed in a testing station with small stream in which the discharge varies from 50 liters/s and 1250 liters/s. Find the suitable length of the weir, if the minimum head to be measured is 50 mm and the maximum head on it does not exceed one-third of its length. An ogee weir 4 meters long has 500 mm head of water. Find the discharge over the weir, if Cd = 0.62. A submerged sharp crested weir 0.8m high stands clear across a channel having vertical sides and a width of 3m. The depth of water in the channel of approach is 1.25m. And 10m downstream from the weir, the depth of water is 1m. Determine the discharge over the weir in liters per second. Take Cd as 0.6. A rectangular, sharp-crested weir with end contractions is 1.4 m long. How high should it be placed in a channel to maintain an upstream depth of 2.35 m for a flow of 400 li/s? A trapezoidal weir having side slope of 1H to 2V discharges 50m3/s under a constant head of 2m. Find the length of the weir assuming C= 0.60. A rectangular channel 6 m wide has a depth of 1 m of water flowing with a mean velocity of 0.75 m/s. Determine the height of a rectangular suppressed weir that will increase the depth of water in the channel to 1.6 m.