Professional Documents
Culture Documents
Vibration Damper and Pulley - Remove and Install
Vibration Damper and Pulley - Remove and Install
1 из 3
Shutdown
Previous Screen
i02530824
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
Guide Bolt
A - 2
5/8 - 18 NF by 7 inch
NOTICE
Keep all parts clean from contaminants.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 28.11.2007
C-15 Truck Engine 6NZ00001-UP(SEBP3032 - 65) - Document Structure Стр. 2 из 3
Illustration 1 g01077686
2. Remove remaining bolts (1) . Remove plate (3) . Remove vibration damper (4) from adapter
(5) and pulley (2) .
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
Guide Bolt
A - 2
5/8 - 18 NF by 7 inch
B 4C-5593 Anti-Seize Compound -
NOTICE
Keep all parts clean from contaminants.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 28.11.2007
C-15 Truck Engine 6NZ00001-UP(SEBP3032 - 65) - Document Structure Стр. 3 из 3
NOTICE
Thoroughly inspect the viscous damper for signs of leakage or for signs
of a dented (damaged) case. Either of these conditions can cause the
weight to make contact with the case. This can affect the viscous
damper's operation.
Illustration 2 g01077686
5. Apply Tooling (B) to bolts (1) . Install bolts (1) . Remove Tooling (A) and install remaining
bolts (1) .
Copyright 1993 - 2007 Caterpillar Inc. Wed Nov 28 18:45:44 UTC+0300 2007
All Rights Reserved.
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 28.11.2007