Professional Documents
Culture Documents
Eng6100 2013t Engineering Drawing Prelim 1 1
Eng6100 2013t Engineering Drawing Prelim 1 1
Home / My courses / UGRD-ENG6100-2013T / Week 2: Lettering and Dimensioning Practices / Prelim: Quiz 1
Question 1
Inclined and curved lines are drawn from________.
Correct
b. top to bottom
c. bottom to top
d. bottom to top
Question 2
Pencils for construction lines, Dimension lines, Leader lines, Extension lines, Center lines, Hatching lines
Correct
and Hidden lines.
Mark 1.00 out of
1.00
Select one:
a. 2H hard grade
b. HB soft grade
c. H medium grade
Question 3
These are aids used for drawing small features such as circles, arcs, triangular, square and other shapes
Correct
and symbols used in various science and engineering fields.
Mark 1.00 out of
1.00
Select one:
a. Set of Scales
b. Flexible curve
c. Templates
d. French Curve
Question 4
A curve consists of a lead bar inside rubber which bends conveniently to draw a smooth curve through
Correct
any set of points.
Mark 1.00 out of
1.00
Select one:
a. None of the choices
b. Flexible curve
c. Set of Scales
Question 5
Spacing between characters = a = _________.
Correct
b. (3/10)b
c. (4/10)b
d. (1/10)b
Question 6
Which instrument are not included in Instruments Box?
Correct
b. Dividers
c. Inking pens
https://trimestral.amaesonline.com/mod/quiz/review.php?attempt=96265&cmid=1316#question-96878-13 2/7
7/25/2020 Prelim: Quiz 1: Attempt review
Question 7
Pencils for visible outlines, visible edges and boundary lines.
Correct
Select one:
a. HB soft grade
b. 2H hard grade
c. H medium grade
Question 8
It should be used only where the possible accumulation of tolerances does not endanger the
Correct
fundamental requirement of the component.
Mark 1.00 out of
1.00
Select one:
a. None of the choices
b. Parallel dimensioning
c. Curve line
d. Chain dimensioning
Question 9 This method is used where a number of dimensions have a common datum feature.
Correct
c. Parallel dimensioning
d. Curve line
Question 10 Which instruments and other aids are not used in draughting work?
Correct
b. French curves
c. Instrument Box
d. Pencils
Question 11
It combines the functions of T-square, set-squares, scales and protractor. It is used for drawing
Correct
horizontal, vertical and inclined lines, parallel and perpendicular lines and for measuring lines and
Mark 1.00 out of angles.
1.00
Select one:
a. Set of Scales
b. Pencils
c. Flexible curve
d. Mini-Draughter
Question 12
Wavy continuous narrow line drawn freehand is used to represent break of an object.
Incorrect
The correct answer is: Break Lines: Type 01.1 (Continuous Narrow Freehand Lines)
Question 13
It is drawn for the sectioned portion of an object. These are drawn inclined at an angle of45° to the axis
Correct
or to the main outline of the section.
Mark 1.00 out of
1.00
Select one:
a. Guide Lines: Type 01.1 (Continuous Narrow Lines)
The correct answer is: Hatching / Section Lines: Type 01.1 (Continuous Narrow Lines)
https://trimestral.amaesonline.com/mod/quiz/review.php?attempt=96265&cmid=1316#question-96878-13 4/7
7/25/2020 Prelim: Quiz 1: Attempt review
Question 14
Pencils for Border lines, lettering and free sketching
Correct
b. HB soft grade
c. H medium grade
Question 15
Engineering drawing is called the _______ language of engineers.
Correct
b. Programming
c. Mechanical
d. Computer
Question 16
It is a two-dimensional representation of three-dimensional objects. In general, it provides necessary
Correct
information about the shape, size, surface quality, material, manufacturing process, etc., of the object.
Mark 1.00 out of
1.00
Select one:
a. Computer Engineering
c. Engineering Management
d. Engineering Drawing
https://trimestral.amaesonline.com/mod/quiz/review.php?attempt=96265&cmid=1316#question-96878-13 5/7
7/25/2020 Prelim: Quiz 1: Attempt review
Question 17
These are provided through the distances between the surfaces, location of holes, nature of surface
Correct
finish, type of material, etc. The expression of these features on a drawing, using lines, symbols, figures
Mark 1.00 out of and notes is called ___________.
1.00
Select one:
a. Line length
b. Line width
d. dimensioning
Question 18
Spacing between words = e = _________.
Correct
b. (4/10)b
c. (5/10)b
d. (3/10)b
Question 19
Means line thickness
Correct
c. Line width
d. Line length
https://trimestral.amaesonline.com/mod/quiz/review.php?attempt=96265&cmid=1316#question-96878-13 6/7
7/25/2020 Prelim: Quiz 1: Attempt review
Question 20
Straight continuous narrow line with zigzags is used to represent break of an object.
Correct
The correct answer is: Break Lines: Type 01.1 (Continuous Narrow Lines With Zigzags)
https://trimestral.amaesonline.com/mod/quiz/review.php?attempt=96265&cmid=1316#question-96878-13 7/7