Professional Documents
Culture Documents
VCDS 8va3
VCDS 8va3
Last updated
6 Oct 2014
Note: This is just organised information from the thread on audi-sport.net http://www.audi-sport.net/xf/threads/8v-vcds-mods.206515/ and I take
no responsibility or liability for any issue, damage or problems arisen from use of this document.
This turns off the DRLs when the light switch is in the
'O' (off) position. I.e no lights at all, even the DRLs are
turned off.
A6. Disable DRL's in Light [09] Central Electronics -> Adaptation -> NO
Switch 'O' Position (9) Tagfahrlicht-Tagfahrlicht nur in Schalterstellung
AUTO
CHANGE: Set Active
A7. Disable seatbelt [17] Instruments -> Long Coding -> Byte 0 ->
warning - CHANGE: Set bits 2-4 using combo box
A8. Disabling the daytime [09] Central Electronics -> Adaptation -> NO
running lights with the Select off when handbrake daytime running lights -
handbrake applied channel (5) – Active
A9. Display the oil [17] Instruments -> Long Coding -> Byte 1 -> YES
temperature gauge in CHANGE: Enable Bit 3
the FIS laptimer
I assume this will work but, not yet having an 8V, I have
not tried it, although my try it on my current 8P and see
if it works the same on that.
A17. Visual confirmation of -------------------- TESTED AUDI
comfort closing - [09] Central Electronics -> Adaptation -> A3 1.2T ‘13
Acknowledgement Signals – Comfort closing ack???
(need to check it back)
CHANGE: Set Yes
A18. Visual representation [10] Parking aid 2 -> Long coding -> Byte 2 -> Yes
of the parking aid CHANGE: Set Bit 0 - visual representation parking
(Audi Parking System sensors
APS)