Professional Documents
Culture Documents
FMD-3200/FMD-3200-BB/FMD-3300: Operator's Guide Model
FMD-3200/FMD-3200-BB/FMD-3300: Operator's Guide Model
Electronic Chart Display and Information System (ECDIS) Operator's Guide procedures for this equipment. For detailed
information, see the Operator's Manual.
English The brand and product names mentioned in this
Controls
The system can be operated with the controls or the trackball module. The procedures in this operator’s guide use the trackball module.
Status LED
BRILL knob GAIN knob The color and state of the LED change according to alert status.
Rotate: Adjusts Rotate: Adjusts OFF: Heater on CPU board is on.
the brilliance of the sensitivity of Green, lighting: Normal operation status; no alerts generated.
the monitor. the radar receiver. Red, flashing rapidly: Alert not acknowledged nor rectified.
Push: Selects a A/C RAIN knob Red, flashing slowly: Alert not acknowledged, but rectified.
color palette. Rotate: Suppresses rain clutter. Red, lighting: SYSTEM FAIL, or acknowledged but not rectified alert.
Push: Toggles between manual and automatic rain
clutter adjustment.
Rotary encoder for VRM POWER key
A/C SEA knob
Rotate: Suppresses sea clutter. Adjusts the active VRM. Turns the system on or off. (This key may or may not control
Push: Toggles between manual and automatic sea VRM1, VRM2 monitor on/off depending on monitor setting.)
clutter adjustment. Activates, deactivates respective VRM.
USB port (under cover)
Connects a USB flash drive.
Rotary encoder for EBL
Adjusts the active EBL.
EBL1, EBL2 Trackball module
Activates, deactivates respective EBL. Operates like a PC mouse.
VIEW/HIDE key
Shows, hides EBLs, Instant
ALARM ACK key
Access barTM, Overlay/NAV
Acknowledges alerts; silences Tools box, VRMs, Route
the audio alarm. Information box.
ACQ/ACT key
Activates selected sleeping
InstantAccess knob AIS target.
Accesses functions on the TARGET DATA key
InstantAccess barTM. Displays the detailed
Rotate: Selects item. target data for selected TT,
Push: Confirms selection. AIS target.
ESC key TARGET CANCEL key
Keyboard MFD key UNDO key RANGE key
Goes back one step in current Sleeps selected activated
A keyboard for entering Toggles operating Undoes the last operation, when Selects a chart AIS target.
InstantAccess barTM operation. creating a route or user chart.
alphanumeric data. modes. scale.
Chart Display Layout
Status bar (see page 3)
CLEAR 10 Aug 2016
ECDIS
ECDIS RADAR Local UTC ±0:00
R
InstantAccess barTM
(see page 4)
Chart scale, presentation mode box Cursor position box
R
Sensor information box
CLEAR
ECDIS RADAR 07:19 R
121.8°
Larger scale
ale
le
e ENC
EN
E C available
10.1kn
10.1kn 0.3kn
Upper
section 121.5°
10.1kn 10.1kn
35°18.956' N
139°48.684' E
XTD Limit:
XTD:
TC:
Ship off screen
Overlay/NAV
Log
Lower Tools box
section
380
AIS COM Error
Alert 380
EBL1 box, Permanent warning box VRM1 box, box AIS COM Error
EBL2 box VRM2 box
2
Status Bar (chart for radar mode)
16:38
10 1k
10.1kn
1kn
10.1kn
ECDIS
How to open a drop-down list Operating mode Selects the operating mode: ECDIS, RADAR, CONNING, or AMS*.
* Optional specification
Indicates a
drop-down list.
08 Aug 2016 E
Local UTC ±0:00 R
3
Instant Access BarTM
Upper section (by chart operating mode) Lower section
Voyage navigation mode Chart maintenance mode
NtoM
ECDIS
SET:
Voyage Gate-1*: Shows or hides chart
Automatically installs Gate-1 provided features; sets chart
Opens the Message Route: charts and licenses. alerts.
dialog box to - Select/Unselect monitored route. AUTO Import: TWO DISP: Chart Legend:
manage AIS Safety - Switch monitored route to Voyage Starts automatic installation of the chart Splits the screen in two, Displays chart info when
and NAVTEX planning mode for editing. data (CD or DVD ROM). horizontally or vertically. own ship is at center of
messages. Instant Track: Manage Charts: screen.
Creates temporary track to return NtoM:
Manages chart cells (grouping, deleting, Displays Notice to Viewing Dates:
Manual Update: to or deviate from monitored route. etc.).
Inserts chart update Mariners info. Shows “display date”
User Chart: Cell Status: dialog box.
symbols manually. Select/unselect monitored user chart.
Mini Conning: Shows the chart catalog to get info about Chart 1:
Shows, hides the Monitor INFO: charts installed in the system. Shows or hides Provides overview of
mini conning display. Show Monitor [Information] dialog License: Manages chart licenses. software keyboard. chart symbols.
box. Public Key: Manages public keys.
Weather Stop Monitor:
Overlay: TCS Stop monitoring user chart and route.
Log:
Shows, hides the Records user/position
weather overlay.
Sync Config: Selects units to synchronize. events to the event log;
FAP-3000, Log
PR-6000/9000 NP-5400, PT-900 accesses various logs.
TCS State: Shows or hides the FAP-2000, PT-500A Sync Status: Checks synchronization status.
TCS TCS TCS TCS
Track Control Status window. TCS Setting State TCS OP State TCS State
Gate-1 Config*: Gate-1 chart management. Selects a color palette.
Go Go
GoAW, GoSEA: Activates AW AW *Shown only Reconvert: Reconverts SENC data.
respective autopilot steering Go Go
SEA
with Gate-1
Clear Charts: Clears charts.
SEA connection.
mode.
Adjusts brilliance of
Voyage planning mode monitor and backlighting
MOB: for control unit.
ECDIS Enters a MOB mark.
UNCALIB
4
Routes
WPT6
Plan Route
PLAN -ning WPT1
WPT1 WPT4
201.5° 309.0°
2137.2NM 971.4NM
Click [New].
WPT2
106.9° WPT3
1748.5NM 25.8°
1470.2NM
Click [Check
Results] tab.
Click [Check
Route].
1 Enter name
for route.
2 Click [OK].
Click [Save].
642.30NM 642.30NM
5
Routes (con’t.)
How to select a route to monitor
In Voyage
4.70 NM
navigation mode,
right click
0.50 NM Click [Select Route]. Select a route. Click
anywhere. [Open].
37
341.2°
Click
XTD Limit: [Waypoints]
XTD: 0.9 m tab.
TC:
In Voyage4.70 NM
navigation mode, Click [Monitor INFO].
right click
0.50 NM
anywhere.
37
341.2°
25 Apr 2016
1Check
Checkroute(s)
route(s)
to delete.
Manage to delete.
PLAN Data Route
Click [Delete].
Delete
6
User Charts
How to create a user chart
Plan User
PLAN -ning Chart
Click [New].
Example objects
Right-click to
open options. 1 Enter name
for user chart.
2 Click [Save].
Click [Save].
7
User Charts (con’t)
How to select objects to display in user chart How to link a user chart to a route
24 Apr 2016
24 Apr 2016
12 Apr 2016
DISP Symbol
SET DISP Plan Route selected.
PLAN -ning Route
Select
Select [Delete]. [DeletePoint].
3
15 Jun 2016
UserC
erC
er
rCChartt1 3
05 May 2016
Manage User 3
01 May 2016
Click
2 [Delete].
PLAN
Data Chart
1 Check chart(s))
to delete.
8
Chart Operations
How to control visibility of chart objects
Basic
Setting
Control basic
chart settings
DISP Chart
SET DISP
Control chart
objects
Symbol
DISP
Control
navigational
features
9
Chart Operations
How to set safety contours and chart alerts
Set safety
contour here.
Click to select chart alert type:
㻭 (Alarm): Audio+visual indications Click icon to switch between
㼃 (Warning): Visual indication 㻯 and 㼃 vice versa.
㻯 (Caution): No indication
To turn off display of a chart object in route monitoring, remove check
mark from alert (alarm, warning, caution).
3 Click an attribute to
show its description.
NAVI
1 Select an object.
Select [Pick Report].
Right-click.
Right-click
2 Click [Select].
How to set up TT and AIS on the TT/AIS page in Overlay/NAV Tools box
Vector
Sets past position Sets vector time Sets vector mode
point interval (time). (shared AIS/TT). (shared AIS/TT).
(ex. TT)
True-G No use.
Note: For systems which have the optional RADAR function, this section of the TT/AIS
page appears blank.
11
TT/AIS Operations (con’t) Alert Icons and Their Meanings
No. Icon Alert state Description
Open the chart menu, select TT/AIS Setting and then Setting. The below menus can also Emergency, Alarm alert
be displayed by clicking the radio button on the pop-up menu Flashing red triangle. Loudspeaker
Active - unacknowledged
that appears when an item other than TT/AIS is selected on 1 alarm symbol at center.
Presented together with alert text.
the Overlay/NAV Tools box.
Flashing red triangle. Loudspeaker symbol at
2 Active - silenced alarm center with diagonal line through symbol.
Presented together with alert text.
Steadily displayed red triangle.
How to filter TT and AIS displays, sleep all targets 3 Active - acknowledged alarm Excalamtion mark at center.
Presented together with alert text.