Professional Documents
Culture Documents
User Manual For Gas Signs (Poosled2020) For Using
User Manual For Gas Signs (Poosled2020) For Using
User Manual For Gas Signs (Poosled2020) For Using
POOSLED CO.,LTD
Add: Section 15, Zilai Industry Area, Pengjiang District, LED DIGITAL DISPLAY
Jiangmen, Guangdong, China
Tel: 86-750-2633538 2633539 USER MANUAL
Fax: 86-750-2633589 BEFORE USING OUR PRODUCT
Official Website: Http://www.poosled.com PLEASE READ THE MANUAL CAREFULLY
Alibaba: Http://www.poosled.cn AND KEEP IT WELL FOR REFERENCE IN FUTURE
Contents
Aluminum frame
Led
digits 1
OUT
2
3 IN
Antenna
Plastic corner Led dot
Power
OE NO Brightness option
Aluminum+plastic board Rj45 LAN cable Power cable OE:YES NO:NO Number quantity 2 3 4
LED NUMBER
a)A digit is made up by 4 vertical modules and 3 horizontal modules.(pictures as followed)
OUT
IN
Horizontal
Power
DC12V
C D E DP
RS 485
B1 A1 F1 G1 B2 A2 F2 G2 Prices
output 1
Prices
OE,ON output 2
Control Card
TCP / IP
DC 12V 1 2 3 4 1 2 3 4
NUM-STC-RJ45(Gas Sign)
Remote Controllers
INPUT:AC100~240V
Item:12V 23A
50/60Hz
Origin:CHINA
OUTPUT:5V 3A
Voltage:12V
210mm
85mm
m
2m
10.
28.4
mm
35mm 93mm
RF wireless remote control is free from outside LCD remote control has single frequencyfor
interference of light, led sign (50 meters is the best control range)
(50 meters is the best control range). LCD remote controller is rechargeable
The battery models of the remote control: Charging current is 110/220v
12V/23A small batteries. It can work for 24 hours when fully charged
POOSLED 05 06 POOSLED
Male&FemalePower Cable Control softwares
General_P3.3.0
GuangZhou
New York
Clamping rings must be installed well to 1.Can search any led digits sign in the same IP Address which are in P series.
! make sure they can be waterproof and with signal. 2.Can set 6 lines and 8 numbers maximum
3.Can set time, date , temperature and humidity
4.Can edit different information anytime, and also compatible with other control ways
(Mobile phone, Computer, RF Remote Control)
5.Can set brightness and colors of led digits sign
1.After logging in, user can manage registered devices under their own names
Wrong
Right 2.Can set 6 lines and 8 numbers maximum
3.Can edit different information anytime, and also compatible with other control ways
(Mobile phone, Computer, RF Remote Control)
4.Can set brightness and colors of led digits sign
5.Use SIM card to control by cloud and internet directly
POOSLED 07 08 POOSLED
ACCESSORIES CONNECTING
E3
F3
Drive card
A G1
G3
A3
D3
Drive card
B F Small 9/10
C1 E1
C3
B3
D1
Control card
E2
F2
from back side
G
G2
A2
D2
C E
C2
B2
B1 A1 F1 G1 B2 A2 F2 G2 B3 A3 F3 G3 B4 A4 F4 G4
Dp1
D
E1
Front Side Back Side Finish
F1
G1
A1
D1
PS: Make sure to connect segments from back side.
B1
C1
C1 D1 E1 DP1 C2 D2 E2 DP2 C3 D3 E3 DP3 C4 D4 E4 DP
Connecting: From back side From left to right
E4
F4
G4
A4
D4
Drive Card Small 9/10
C4
B4
E3
F3
G3
A3
D3
C3
B3
B1 A1 F1 G1 B2 A2 F2 G2 B3 A3 F3 G3 B4 A4 F4 G4
G2
A2
D2
power supply
C2
B2
E1
F1
Drive card
G1
A1
D1
Control card
C1 D1 E1 DP1 C2 D2 E2 DP2 C3 D3 E3 DP3 C4 D4 E4 DP
B1
C1
POOSLED 09 10 POOSLED
2.Cards Connecting
B-1. Multi Signs Connection
These are the connection diagram of the signal wires. double sided with control box >>>
! Please connecting the power wires under guidance of electrician.
B BB
POWER
POWER
Drive Card
D DD
IN
PC Software Control APP Control RF Controller LCD Controller
B BB
C CC
OUT1
Control Card
A B C D AA BB CC DD
Antenna
AC220V
POOSLED 11 12 POOSLED
B-2. Multi Signs Connection (Single Sided) Drive Card & Control Card Connection
For example>>>
IN
Regular
Diesel OUT
IN
Unleaded
3 OUT
POWER
IN
2
POWER
POWER OUT1
POWER
POOSLED 13 14 POOSLED
B-3. Multi Signs Connection (Double Sided) Drive Card & Control Card Connection
For example>>>
Regular
IN IN
Plus
OUT OUT
IN IN
Premium
OUT OUT
3 6
POWER POWER
OUT2
2 5
OUT1
POWER POWER
POWER POWER
1 POWER
4
POWER
POWER
POWER
POOSLED 15 16 POOSLED
3.Cables Connecting B-1. Power Cables Connecting
A. LAN cables connecting
1 2
Wrong Must be screwed L N L N
3 3
Finish 1 2
Japanese Earth wire plug
1 2
1-L
2-N
3-G
3-G
Right 2-N
POOSLED 17 L N 1-L 18 POOSLED
B-2. Power Cables Connecting
Lan Cable
L
N
L
USA N China / Australia
POOSLED 19 20 POOSLED
control software control software
POOSLED
A. RF remote control
SET
C. LCD RF remote control
DP EDIT SET ENTER
1 2 3
D. TCP/IP-Wireless software control
- + 4 5 6
E. TCP/IP-Wireless software control for cash+credit
7 8 9
#/
*/ 0 CANCEL
POOSLED 21 22 POOSLED
RF REMOTE CONTROL
For example>>>
Before setting, please press SET + DP + to test digit
connecting.When you press this setting, the sign will count-up Regular Regular
0-9 twice.After your test, let's go on setting step by step.
Unleaded Unleaded
1.Parameter Setting(This setting is professional and technical.
If any problem comes up, please ask and follow the engineer's Diesel Diesel
guidance.)
Press +/ - to set correct digits of your sign. Before setting brightness setting,
please check the brightness sensor work or not.
Then press SET to next step, shows . It means
The position of the digit is over middle of the sign, as photo.
that how many signs in 1 side of your project. Illuminate or cover the sensor for 10s to see the brightness
Press +/ - to set correct numbers of signs in your project. of the sign whether it is working or not.
POOSLED 23 24 POOSLED
If your sign does not have brightness sensor, please follow RF CONTROLLER FOR CASH+CREDIT
below setting.
1.For CASH+CREDIT LED boards, you can set 3 programs to display.
a.Press SET + into setting date and time. there will be
1
1
1
1
1
1
2 1
It means the brightness at night, you can set it 0-7 by 4)Press “SET” to save and exit.
pressing
+ / - . 0 is the darkest, 7 is the brightest 3.How to choose which type to show ? Only cash or credit?
The normal value is A6P1 before shipping. Or all together ?Please follow as below:
Antenna
LCD CONTROLLER FOR CASH+CREDIT
Password: 1688
1.Instruction:
2)Display format:
Set the display format of led gas signs.
a)Example 1:
Your led gas price sign is with “CASH/CREDIT”, and you want the
led sign to display two two different prices and switch in each 10 3)Display brightness:
seconds, and the format is 8.889/10,because 9/10 is fixed,you You can set Day and night brightness.
should set that is rows is 2 &columns is 3 &decimal is 2. (Operation: Press “SET”--- “1688”---“<#>”---“3”---to select and
Your led gas sign is with “CASH/CREDIT”, but you only want the change the other one brightness.Press < # > to Save it and go to
led gas sign to display one price, and the format is 8.889/10, the next step setting.)
because 9/10 is fixed,you should set that is rows is 1 &columns is
3 &decimal is 2.
5)Initialization:
You can reset everything of the LCD remote controller and led gas
signs in this setting.
After set this, every information will be lost. Please note it !
( Operation: Press “SET”---“1688”---“<#>”---“5”---“<#>”---
“CANCEL”)
2)Item price:
( Operation: Press “EDIT”---“2”---”---choose the correct number that
you want, and then press “↓” ---“ENTER” twice. Then it can send the
information to led gas sign.If it says “YES” that means it has sent the
information already, if it says “NO” please double check the setting.)
POOSLED 31 32 POOSLED
6)Change password:
You can change the password by yourself if you need. And please
“CANCEL”)
POOSLED 33 34 POOSLED
TCP/IP- SOFTWARE CONTROL
LAN connection 1 ( Mobile phone APP)
Networkhub
LAN LAN
TCP-wireless-GAS
LAN
LAN
TCP-wireless-GAS
LAN
Android iOS
Gas price sign
1 http://www.poosled.com 2 Windows
POOSLED 35 36 POOSLED
Mobile phone APP Operation User Manual:
1. Download the APP(General_P3.3.0 ) to Mobile Phone 4. Click the Gas Price to adjust numbers.
General_P3.3.0
3. Open APP (General_P3.3.0), refresh and search ID address of LED Gas Sign,
click it and sign in to set.
POOSLED 37 38 POOSLED
5. Change name of Gas/ Petrol. 7. Click ID again to set, press "setting" to sign in, and then press "Flicker",
choose "YES",Save it, gas price numbers will be flashing.
choose
6. Send
change
POOSLED 39 40 POOSLED
Laptop Software Operation User Manual: 4. Click the Gas Price to adjust numbers.
change
price
Windows General_P3.3.0
LAN
TCP-wireless-GAS
change
LAN
3. Open software (General_P3.3.0 ), refresh and search ID address of LED Gas choose "YES",Save it, gas price numbers will be flashing.
Sign, click it and sign in to set. click it and sign in to set.
POOSLED 41 42 POOSLED
LAN connection way
4G APP +INTERNET WIFI CONTROL
4G SIM CARD
PIOT1.0
Android iOS
pwd: 123456
1 http://www.poosled.com 2 Windows
POOSLED 43 44 POOSLED
3. Choose your Gas signs (Check MAC) 5.Send successful ! Wait for 10-30 seconds to check the data
sending successfully.
test
test test
test test
change
change
POOSLED 45 46 POOSLED
Computer- 4G Software Operation User Manual:
4.Choose your Gas signs (Check MAC)
! Check MAC
Windows PIOT1.0
Computer
change
price
PIOT1.0
test
123456 ID:test
pwd:123456
6.Wait for 10-30 seconds to check the data sending successfully.
change price
POOSLED 47 48 POOSLED
Question 4:
FAQ Some led signs are controlled together, but only the sign which has
Question 1:
control(main)card can work normally, the other signs can not work well.
Led digits sign can not work well, some led modules can not be
lighting. Answer :
A. Please check the cables of control card and connect them again.
Answer :
A.Please check the connecting cables of drive card whether it is loose B. Please use the RF remote controller to set the numbers again.
or not,and connect them again.
C. Please check the connecting cable of control card and drive card.
B.LED module is broken, please replace the new module to the led sign.
D. Please check IN and OUT port. Please connect them again.
C.Please set the correct quantity of the numbers.For example: 88.88,
8.889/10 is 4 numbers.(Single sided or double sided are the same.) E. Please check control card’s signal light is on.
D.Please check drive card’s 2pin ports,and connect to other 2pin ports
or change led number.
Summary:
If all steps you have tried and done, but led sign still can not work well.
Question 2: please repair and change the parts.
All the led digits are not lighting. 1.Change led numbers.
Answer : Remark:
A. Please use the multi-meter to check power supply whether it is on Please return all the parts to supplier after you change.We still want to
or off. help solve all the problems and check our products to provide better
B. And please connect the power supply’s cables again. service to you for long time.
C. Please check power supply whether it is 12V. If you have some more other questions when you are using the
led gas price sign, please feel free to contact us. We will support
you anytime.Thanks in advanced!
POOSLED 49 50 POOSLED
ACTUAL CASE
POOSLED 51 52 POOSLED