Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 3

WELDING PROCEDURE SPECIFICATION

Company Name : V&S CONSTRUCTIONS

Site : INS JALASHAWA


Welding Procedure No: 001 Date: 21.10.21 Sheett. 1 of 3
Supporting PQR :
Welding Process : GTAW Type: MANUAL
JOINTS (QW 402) DETAILS
Joint Detail : 20MM SINGLE “V” BUTT
Backing(Yes/No) : NO
Backing Material : IS 2062 GR B
(Sketches,Production Drawings,weld symbols
and written description should show the
General arrangements of the Parts to be welded
where applicable, the root spacing and the T=Thickness of Base Metals
details of the Weld Groove to be specified) t = Thickness of Weld Metal

BASE METAL (QW 403)


P.No: 1 Group No:1 to P.No: 1 Gr. No:1
Specification Type or Grade : IS 2062 GR B
Or Chemical Analysis and Mech. Properties: EQUIVAVELANT TO ABOVE
Thickness Range : 20 TO 60 MM
Grove: “V” Fillet: N/A
Deposited Weld Metal : 20 MM+1.5MM ±2MM Geove: 20MM Fillet: N/A
Pipe Dia range : Grove: upto
Others : PLATE

FILLER METALS(QW 404)


Specification No: ER 70 S2
F.No: 6
A.No. 1
AWS NUMBER(CLASS) Root & Subsequent: SFA 5.18
Size of Filler Metals Dia: 2.4 MM Dia:
Electrode Flux (Class) N/A
Flux Trade Name N/A
Consumable Insert N/A
Each Base Metal, Filler Metal combination
should be recorded individually

Contd..2
WELDING PROCEDURE SPECIFICATION

Welding Procedure No: 001 Date: 21.10.2021 Sheet. 2 of 3

Supporting PQR :

POSITION (QW 405) POST WELD HEAT TREATMENT(QW407)


Position of Grove: 1 G Temparature Range: 250°C ± 35°C
Welding Progression: N/A Time Range: 2 Hours
Position of Fillet: N/A GAS (QW 408)
PRE HEAT (QW 406) Shielding Gas(es): Argon
Pre Heat Temp.(Min.):100°C Percentage Comp.: 99.95 %
Inter Pass Temp.(Max):300°C Flow Rate: 8-10 Lt/Min
Pre Heat Maintained: 100°C Gas Backing : N/A
Continuous or Special Heating where Trailing Shielding Gas Composition: 99.95 %
applicable should be recorded Flow Rate : 6-8 Lt/Min

ELECTRICAL CHARACTARISTICS (QW 409)


Current : DC Polarity: Straight
Amps Range : 60 – 200 Amp Volts Range: 10 – 30 V
(Volts and Amps Range should be recorded for each electrode Size, Position, Thickness etc.This
information may be listed in a Tabular form shown below)
Tungston Electrode Size& Type: 1.2 MM & EW TH2 (Pure Tungston ,2% Thoriated etc.)
Mode of Metal tramsfer for GMAW: N/A (Spray arc, Short circuiting arc etc.)
Electrode wire feed Range : N/A

TECHNIQUE (QW 410)


String or Weave Bead : String
Orifice or Gas Cup Size : 8 MM ID
Intial and Interpass Cleaning : Grinding/Wire Brushing
Method for Back Gouging : N/A
Oscillation : N/A
Contact Tube to Work distance : N/A
Multiple or single Pass per side : Multiple
Travel Speed range : N/A
Travel speed range : N/A
Peening : N/A
Others : Nil
WELDING PROCEDURE SPECIFICATION

Welding Procedure No: 001 Date: 21.10.2021 Sheet. 2 of 3

Supporting PQR :

Current
Travel
Weld Filler Metal Type Volts
Process Speed Others
Layers Class Dia Amps range
mm/min
range
1 GTAW ER 70S-2, 2.4MM DC 70-120 10-30V 60MM/Min Nil
Remaining GTAW ER 70S-2, 2.4MM DC 70-120 10-30V 60MM/Min Nil
Layer

Prepared By : Approved By:

You might also like