Professional Documents
Culture Documents
Fispq Polyol 330 - Ghs 2021.Pt - en
Fispq Polyol 330 - Ghs 2021.Pt - en
com
1 IDENTIFICATION
Product's name:
Number CAS
2 HAZARDS IDENTIFICATION
Pictograms:
500-039-8
CEE No.:
Striving for QualityMSDS
In compliance with NBR 14725-2/2010
NBR 14725-4/2014
disturbances.
Adverse effects on
human health: Headache, weakness, dizziness, ataxia, confusion, delirium. Nausea,
vomiting and diarrhea. Cough, sore throat and dyspnea. Redness on
the skin. Redness and pain in the eyes.
Main symptoms:
Remove victim to fresh air and keep at rest. Monitor respiratory
function. If victim is breathing hard, provide oxygen. If necessary,
give artificial respiration. Get medical attention. Take this MSDS.
Inhalation: Remove contaminated clothing and shoes. Wash exposed skin with
large amounts of water for at least 15 minutes. Get medical attention.
Take this MSDS.
Skin contact: Wash with running water for at least 15 minutes, keeping the eyelids
open. Remove contact lenses when appropriate. Get medical attention
immediately. Take this MSDS.
Eye contact: Wash victim's mouth with plenty of water. DO NOT INDUCE
VOMITING. Get medical attention. Take this MSDS.
Ingestion: Avoid contact with the product when helping the victim. Keep victim
at rest and warm. Do not offer anything orally to an unconscious
person. Symptomatic treatment should comprise, above all, supportive
measures such as correction of electrolyte and metabolic disorders, in
Protection of the rescuer addition to respiratory assistance.
and/or notes for the
doctor:
May cause irritation to
skin, eyes and
respiratory tract. May
cause gastrointestinal
5 FIRE FIGHTING MEASURES
Foam, carbon dioxide (CO2), chemical powder can be used
Appropriate extinguishing media: or water fog.
Striving for QualityMSDS
In compliance with NBR 14725-2/2010
NBR 14725-4/2014
Unrecommended
Extinguishing Media:
Self-contained breathing
apparatus (SCBA) with
positive pressure and full
protective clothing.
6 CONTROL MEASURES FOR SPILLS OR LEAKS
personal precautions
Non-flammable product
Removal of ignition
sources:
Do not touch damaged containers or spilled material without
wearing suitable clothing. Avoid inhalation, prolonged contact
Personal Precautions
with skin or eyes. Use personal protective equipment as
for Emergency Service
described in section 8.
Personnel:
Do not touch damaged containers or leaked material. Avoid
Personal precautions for contact with skin and eyes. Use personal protective
non-emergency equipment as described in section 8.
personnel:
Environmental precautions
Procedures to be Prevent the spilled product from reaching water courses and
adopted: sewers.
Cleaning methods
Use water mist or vapor suppressor foam to reduce
dispersion of vapours. Use natural or containment barriers
Procedures to be leakage. Collect spilled product and place in containers
adopted: themselves. Adsorb the remaining product, with dry sand, earth,
vermiculite, or any other inert material. put the material
adsorbed in suitable containers and remove to a safe place.
Do not dispose directly into the environment or into the sewer system.
hazard prevention You
secondary: materials used in fire control can cause pollution.
Striving for QualityMSDS
In compliance with NBR 14725-2/2010
NBR 14725-4/2014
Hygiene measures:
Product download:
Handle in a ventilated area or
with a general
ventilation/local exhaust
system. Avoid formation of
vapours/mists. Do not smoke.
Non-flammable product.
Inspect containers for
damage or leaks before
handling.
Avoid contact with skin, eyes
and clothing. Avoid
breathing product
vapours/mists. Wear personal
protective equipment as
indicated in Section 8.
Do not eat, drink or smoke
while handling the product.
Wash your hands thoroughly
before eating, drinking,
smoking or using the
bathroom. Contaminated
clothing must be changed
and washed before reuse.
-It is NOT safe to discharge
Appropriate technical measures for storage
Keep the product in its original packaging and in a cool place.
keep the
Appropriate:
tightly closed containers and at a temperature in the range of 15 –
23°C.
Store away from food. Out of reach of children.
Inappropriate: High temperatures.
Products and materials
Strong oxidizing agents.
incompatibles:
Safe materials for packaging
Recommended: Not determined.
Engineering control
measures:
Provide ventilation
combined with local
exhaust if product
vapors/mists are likely
to form. It is
recommended to make
emergency showers
and eye washes
available in the work
area. Engineering
control measures are
most effective in
reducing product
exposure.
Appropriate personal protective equipment:
Eye/face Protective goggles.
protection: Protective gloves made of nitrile
Skin and rubber or PVC.
body
Respiratory protective
protection:
equipment against vapors/mists.
Breath Full protective clothing that
protection: covers the entire body. Wear
face shield.
Special
precautions:
9 PHYSICAL AND CHEMICAL
PROPERTIES
Aspect: Liquid.
Odor: Resin characteristic.
pH: 7.50 - 8.50.
Melting
Not determined
point/freezing
point:
Initial boiling point and 100°C
boiling temperature range:
171 °C
Flash point:
Not applicable.
Evaporation rate:
Not applicable.
Flammability:
Not applicable
Explosive limits:
< 0.001 hPa at 20°C
Steam pressure: Not applicable.
Vapor Density: Approx. 1010 kg/m3 at
Relative density: 20°C
Solubility in water:
immiscible in water
Total solids
22.00 - 26.00%
Octanol/water Not determined
partition
coefficient (Kow): Not applicable
Auto-ignition temperature:
Striving for QualityMSDS
In compliance with NBR 14725-2/2010
NBR 14725-4/2014
Chemical stability:
Possibility of hazardous
reactions:
Conditions to avoid:
Incompatible materials
and substances:
Hazardous
decomposition
products:
Stable product
Skin corrosion
and irritation: Causes skin irritation with redness, pain
and dryness.
Serious
eye Causes eye irritation with redness and
damage/ey pain.
e
irritation:
The product is not expected to cause any
Respiratory or sensitization.
skin
sensitization: Based on animal studies, it is not
Germ cell considered to be mutagenic in germ
mutagenicity: cells.
Carcinogenicity: Not classified as a human carcinogen.
Reproductive Based on animal studies, it is not
and lactation considered toxic for reproduction.
toxicity:
May cause respiratory tract irritation with
Systemic toxicity coughing, sore throat and dyspnea. May
for cause central nervous system disorders
certain target with
organs – Single headache, muscle weakness, dizziness,
exposure: ataxia, confusion, delirium and coma.
Striving for QualityMSDS
In compliance with NBR 14725-2/2010
NBR 14725-4/2014
Systemic toxicity to
There are no data for the mixture as a whole.
specific target organ -
Repeated exposures:
Aspiration hazard: There are no data for the mixture as a whole.
12 ECOLOGICAL INFORMATION
Environmental effects, behavior and product impacts
There are no data for the mixture as a whole.
Ecotoxicity:
Not available
Bioaccumulative
potential:
Medium mobility
Mobility in soil
13 FINAL DESTINATION CONSIDERATIONS
Recommended methods for final disposal
Avoid occupational exposure or environmental contamination. Please recycle any unused portion of
the material for your approved use or Product: return it to the manufacturer or supplier. Other methods
consult federal and state legislation: CONAMA Resolution 005/1993, NBR
10,004/2004.
Product remains:
Keep product remains in their original containers and properly closed.
Disposal must be carried out as established for the product.
Do not reuse empty packaging. These may contain product remains and
must be kept closed and sent for proper disposal.
Used packaging:
14 TRANSPORT INFORMATION
National and international regulations
16 OTHER INFORMATION
This MSDS was developed based on current knowledge of the chemical and provides information
regarding protection, safety, health and the environment.
It is cautioned that the handling of any chemical substance requires prior knowledge of its dangers by
the user. It is up to the company that uses the product to promote the training of its employees and
contractors regarding the possible risks arising from the product.
Acronyms:
CAS - chemical abstracts service
EC - European Community
Striving for QualityMSDS
In compliance with NBR 14725-2/2010
NBR 14725-4/2014
Bibliography:
[EPI-USEPA] ESTIMATION PROGRAMS INTERFACE Suite - United States Environmental
Protection Agency. Software.