Professional Documents
Culture Documents
Biovis mp2000
Biovis mp2000
Biovis mp2000
The system is designed with the intent of creating a Ability to automate the entire analysis process
dedicated imaging workstation for material analysis. on a batch of up to 500 images unsupervised
With efficient lab workflows possible, and ability to
Easy & professional Report generation
produce accurate results with just a few mouse clicks.
capabilities using pre-configured templates
Biovis MP2000
“Sophisticated and Powerful Image Analysis
System for quantitative Metallographic
analysis of Microstructures”
Biovis MP2000
Grain Size : Estimate grain size using Planimetric or Intercept methods, with Advanced grain boundary
identification algorithms. Measure according to ASTM E112 and E1382.
Phase/Volume fraction : Measure phase percentages or volume fractions from the image by Automatic or Manual
delineation of phases. Report as per ASTM E562 standard.
Nodularity : Identify graphite nodules and measure size, % Graphite and % nodularity. Classify nodules
on the basis of size (ASTM A247 or user defined).
Graphite Flake : Graphite flakes analysis, Obtain %graphite area, Measure and classify graphite flakes
according to length.
Porosity : Discriminate pores in the field of view to estimate amount of Porosity of material. Measures
sizes and porosity percentage. Also measures apparent porosity according to ASTM B276.
Coating Thickness : Measures cross sectional thickness of coatings or layers. Choice of different methods for
automatic or interactive measurements.
Decarburization depth : Obtain total or partial decarburization depths with interactive tracing or auto-detection
methods.
Banding : Measures the degree of banding and orientation according to ASTM E1268
Dendritic Arm Spacing : Perform statistical analysis of the spacing between the dendrite arm structures. An
interactive method of drawing test lines is utilized for proper selection of dendrite arms.
Microhardness : Measures Knoop and Vickers hardness values from an indentation image. Reports as per
ASTM E1384.
Inclusion rating : Detect and classify inclusions as per ASTM E45/ E1122 methods. Automated scanning with
optional motorized microscope stage.
Biovis
Registered trademark of Expert Vision Labs
202 H Block, Ranjit studio, Dadasaheb Phalke Road,
Dadar(E), Mumbai 400 014, INDIA.
Ph: 91 22 40664242 Fax: 91 22 2415 5876
Email: sales@expertvisionlabs.com