Professional Documents
Culture Documents
3 Autocad ធោង ឃីន
3 Autocad ធោង ឃីន
ធោង ឃីន
nisSitvisVkmµsMNg;suIvil km<uCa Cambodia Civil Engineering Student
I. lkçN³nigEsVgyl;BI AutoCAD
1> niymn½y
AutoCAD KWCakmμviFImYyEdleRbIsMrab;KUrbøg;GKar sßabtükmμ GKÁisnI FarasaRsþ
sMNg;sIuvil nig sMNg;ma:sIunenAelI Computer .rebobénkareRbI AutoCAD manEtmYyKt;.
b:uEnþvaGacxusKña bnþicbnþÜceTAelIvis½ynimYy².
2>lkçN³Biessrbs;kmμviFI
- GacKUrrUbPaB)anl¥nigc,as;las;
- gayRsYlkñúgkarEkERbb¤lubrUbPaB
- cgcaM)anyUrnigrh½ykñúgeBlEtmYy
- GacbgVilnigeFVIclnarUbPaB)anl¥
- GactMeLIgrUbPaBBitkñúglMhnigBRgIkbRgÜm
- GaceGaysac; B_N nig Rsemal)any:agc,as;
- Gacdak; Material eGayrUbPaBtamkarBit
3> karvivtþn_énkmμviFI
- Version 1.0 (Release 1) - December 1982
- Version 1.2 (Release 2) - April 1983
- Version 1.3 (Release 3) - August 1983
- Version 1.4 (Release 4) - October 1983
- Version 2.0 (Release 5) - October 1984
- Version 2.1 (Release 6) - May 1985
- Version 2.5 (Release 7) - June 1986
- Version 2.6 (Release 8) - April 1987
- Release 9 - September 1987
- Release 10 - October 1988
- Release 11 - October 1990
- Release 12 - June 1992 (last release for Apple Macintosh )
- Release 13 - November 1994 (last release for Unix, MS-DOS and Windows
3.11)
- Release 14 - February 1997
- AutoCAD 2000 (R15.0) - March 1999
- AutoCAD 2000i (R15.1) - July 2000
- AutoCAD 2002 (R15.6) - June 2001
- AutoCAD 2004 (R16.0) - March 2003
- AutoCAD 2005 (R16.1) - March 2004
- AutoCAD 2006 (R16.2) - March 2005
- AutoCAD 2007 (R17.0) - March 2006
- AutoCAD 2008 (R17.1) - March 2007
- AutoCAD 2009 (R17.2) - oct, 30, 2008
- AutoCAD 2010 (R8.0) - August, 19, 2009
4> RbePT Computers EdlGacdMeNIrkarkmμviFI)an
*. AutoCAD 2010 Ca 2D
• 2 GB RAM
*. AutoCAD 2010 Ca 3D
• Intel Pentium 4 processor or AMD Athlon, 3 GHz or higher; Intel or AMD
dual-core processor, 2 GHz or higher
• 2 GB RAM or greater
• 1,280 x 1,024 32-bit color video display adapter (true color) 128 MB or
greater, Microsoft® Direct3D® capable workstation class
5> rebobtMeLIgkmμviFI
1. ebIk File AutoCAD BI Drive or CD-ROM
5. Installation Product
6. Next
7. Accept
8. Next
9. Next
15. Finish
rebobTI 2
Start -> Programs -> Autodesk -> AutoCAD 2010 -> AutoCAD 2010
50
100,0
50
50,50
50,50 150,50
0,0
0,0 50 150
50 150
Relative Coordinate
Absolute Coordinate
7.3. karKUreRbIRbEvgnigmMu
eRkABIeRbI Coordinate system manviFImYyeTotKWeRbIRbEvgGgát;eFobCamYymMu .
8. erobcMeBlKUr
Units: KWCaxñatmYyénbNþaRbeTsEdleKniymeRbIR)aserog²xøÜn nig gayRsYlkñúgkar
emIlelIpÞaMgénkarKUr.
cuc Format menu bars -> Units
Command: ddunits
• Millimeters: xñatRbEvg
• Engineering: Feet and decimal inches (1’- 3.5000’’)
• Architectural: Feet, inches, fractional inches (1’- 31/2’’)
• Fractional: Fractional Unit (15 1/2)
• Scientific: Notation (1.5500E+01)
9 Select Scroll elI Decimal Degrees
• Decimal Degrees Display Partial degrees as decimals (90.00)
9 eRCIserIs Direction
9 Tick elI East
90: North
270: South
pÞúynwigRTnicnaLikar
- Counter Clock wise:
9. kMNt;pÞaMgénkarKUr 1³1
• Limits ( Format ->Drawing Limits)
• ON / OFF /< Lower Left Conner > < 0.000, 0.000>0,0
• Uper Right Conner < 420, 297 >:420,297
y
420,297
A3
0,0
x
cMNaM³TMhMRkdaseRbIsBVéf¶
• A0 = 841 x 1189
• A1 = 841 x 594
• A2 = 420 x 594
• A3 = 420 x 297
• A4 = 210 x 297
• A5= 210 x 148
• A6= 105 x 148
10> TItaMg Mouse
Snap eRbIsMrab;cab;bnþén Object BImYyeTAmYyEdlmanlkçN³c,as;las;nigsuRkit.
11. Grid
Command: grid
Specify grid spacing(X) or [ON/OFF/Snap/Major/aDaptive/Limits/Follow
/Aspect]<0.5000>: l00
Display grid beyond Limits [Yes/No] <No>: Y
• bgðajRklacRkRtg;
On =F7
• Off = F7 minbgðajRklacRkRtg;
- F5 pøas;bþÚrTisedA Mouse
13> begáItkargarfμI
eRbIsMrab;begáItpÞaMgkargarfμIEdlBMuTak;TgCamYykargarcas;
Click File menu bars -> New ->start from scratch -> metric -> ok
Ctrl+N -> start from scratch -> metric -> ok
14> rkSakargar
rkSakargarTukedIm,IbnþnaeBleRkayeTotb¤rkSaCaÉksarTuksMrab;éf¶eRkaynigPsþútag
Click File menu bars -> save -> name files ->save
Ctrl+s -> name files.dwg ->save
15> ebIkkargarcas;
ehAkargarcas;mkbnþeTotb¤EkERbcMnucxøH²EdlRtUvpøas;bþÚr.
Click File menu bars -> open ->Directories -> name files -> open
-> ok
Graphics Cursor
Graphics Window
-
Command Line
Cursor Coordinate Display
x> KUrbnÞat;edayeFobnigmMu
Command: L
LINE Specify first point: 200,100
Specify next point or [Undo]: @200<45
eRbIsMrab;KUrbnÞat;EdlmankMras;.
Command: trace
Specify trace width <10>:10
Specify start point: click
Specify next point: 100
Specify next point:
x> KUrctuekaNEkgmankMras;
Command: PL
PLINE
Specify start point: 200,300
Current line-width is 0.0000
Specify next point or [Arc/Half width/Length/Undo/Width]: W
Specify starting width <0.0000>: 10
Specify ending width <10.0000>: 10
Specify next point or [Arc/Half width/Length/Undo/Width]: @100, 0
Specify next point or [Arc/Close/Half width/Length/
Undo/Width]: @0, 50
Specify next point or [Arc/Close/Half width/Length/
Undo/Width]: @-100, 0
Specify next point or [Arc/Close/Half width/Length/
Undo/Width]: @0,-50
K> KUrG½kS
Command: Pl
Specify start point: 200,300
Current line-width is : 0.00
Specify next point or [Arc/Half width/Length/Undo/Width]: A
Specify endpoint of arc or
[Angle/CEnter/Direction/Half width/Line/Radius/Second pt/Undo/
Width]: 200
Specify endpoint of arc or
[Angle/CEnter/Close/Direction/Half width/Line/Radius/Second pt/Undo
/Width]: 200
Specify endpoint of arc or
[Angle/CEnter/Close/Direction/Half width/Line/Radius/Second pt/Undo/
Width]: 200
-> Load…
-> Ok -> ok
6. Command: Line type scale
eRbIsMrab;dak;emKuNeGayKMlaténbnÞat; .
Command: lts
LTSCALE Enter new linetype scale factor <1.0000>: 20 emKuN
Regenerating model.
karbEnßmExSekag
Command: Len
LENGTHEN
Select an object or [DElta/Percent/Total/DYnamic]: De
Enter delta length or [Angle] <100.0000>: A
Enter delta angle <0>: 30
Select an object to change or [Undo]: Click Object
Select an object to change or [Undo]: Right Click
kat;bnßyCaPaKry
Command: len
LENGTHEN
Select an object or [DElta/Percent/Total/DYnamic]: P
Enter percentage length <100.0000>: 50
Select an object to change or [Undo]: Click Object
Select an object to change or [Undo]: Right Click
srub
Command: len
LENGTHEN
Select an object or [DElta/Percent/Total/DYnamic]: T
Specify total length or [Angle] <1.0000)>: 1000
Select an object to change or [Undo]: Click Object
Select an object to change or [Undo]: Right Click
karbEnßmnigbnßytamcitþ
Command: len
LENGTHEN
Select an object or [DElta/Percent/Total/DYnamic]: DY
Select an object to change or [Undo]: Click Object
Specify new end point: 100 RbEvgbEnßm
19. Command: Donut (Draw menu bars -> donut)
eRbIsMrab;KUrrgVg;EdlmanépÞnigkg;Lan.
Command: do
DONUT
Specify inside diameter of donut <0.5000>: 0
Specify outside diameter of donut <1.0000>: 20
Specify center of donut or <exit>: Click Point
Specify center of donut or <exit>: Right Click
20. Command: Fill (Tools menu bars-> option -> Apply solid fill)
eRbIsMrab;dak;nigbiTépÞrbs; Donut b¤ Hatch.
Command: fill
Enter mode [ON/OFF] <ON>: OFF
Automatic save to enHCakEnøgTuk
On: ebIk
Off: biT
C> Exit
- Extension: eRbIsMrab;cab;cMnucmYyedaykMNt;RbEvgc,as;las;
- Center: eRbIsMrab;cab;cMnucp©itrgVg;
- Quadrant: eRbIsMrab;cab;cMnucrgVg;EckCabYn
- Tangent: eRbIsMrab;cab;cMnucb:HrgVg;
- Perpendicular: eRbIsMrab;cab;cMnucEkg
-Nearest: eRbIsMrab;cab;cMnucCitbMput
-Parallel: eRbIsMrab;;cMnucRsb
x> KUrctuekaNEkgEdlRcitRCug
Command: REC
RECTANGLE
Current rectangle modes: Chamfer=10.0000 x 30.0000
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/
Width]: C
Specify first chamfer distance for rectangles <10.0000>:10
Specify second chamfer distance for rectangles <30.0000>: 20
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/
Width]: Click Pont
Specify other corner point or [Dimensions]: Click Pont
K> KUrctuekaNEkgEdlmanRCugmUl
Command: REC
RECTANGLE
Current rectangle modes: Chamfer=10.0000 x 10.0000
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/
Width]: F
X> KUrctuekaNEkgEdlmankMras;
Command: REC
RECTANGLE
Current rectangle modes: Width=2.0000
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/
Width]: W
Specify line width for rectangles <2.0000>: 10
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/
Width]: Click Point
Specify other corner point or [Dimensions]: Click Point
x> karKUredayeRbIBIrcMnuc
eKGacykcMnucBIr CaCMnYyedIm,IKYrrgVg;ehIycMnucenaHGacCa cugbnÞat; rW CacMnucd¾éTeTotk_
)an.
Command: C
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: 2
Specify first end point of circle's diameter: Click point
Specify second end point of circle's diameter: Click point
K> KUrrgVg;edayeRbIbIcMnuc
Command: C
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: 3p
Specify first point on circle: Click point
Specify second point on circle: Click point
Specify third point on circle: Click point
X> KUrrgVg;edayb:HBIrcMnucnigkaMrgVg;
Command: C
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: Ttr
b:HTI1
Specify point on object for first tangent of circle: Click
g> KUrrgVg;edayb:HbIcMnuc
Draw Menu->Circle->Tan Tan Tan
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan
tan radius)]: _3p Specify first point on circle: Click Object
b:HcMnucTI1
Specify second point on circle: Click object b:HcMnucTI2
Specify third point on circle: Click Object b:HcMnucTI3
eRbIsMrab;KUrExSekag .
k> KUrGgát;FñÚredayeRbIbIcMnuc
Command: arc
cMnucTI1
Specify start point of arc or [Center]: Click
x> KUrGgát;FñÚredayeRbIcMnuckNþalnigmMubgVil
Command: arc
Specify start point of arc or [Center]: c
Specify center point of arc: click point
Specify start point of arc: click point
Specify end point of arc or [Angle/chord Length]: A
Specify included angle: 180
X> KUrGgát;FñÚredayeRbIBIrcMnucnigkaM
Command: _arc Specify start point of arc or [Center]: Click Point
Specify second point of arc or [Center/End]: _e
Specify end point of arc: Click Point
Specify center point of arc or [Angle/Direction/Radius]: _r Specify radius
of arc: 60
- 3 Point KWCakarKUrFñÚredaydwg3cMnuc
- Start, Center, End KWCakarKUrFñÚredaydwgcMnuccab;epþIm kNþalnigbBa©b;
- Continue bnþ
27. Command: Point (Draw Menu bars -> Point)
eRbIsMrab;KUrcMnucBugehIyTMhMxusKñatamkarkMNt;TukCamun.
Command: point
Current point modes: PDMODE=0 PDSIZE=0.0000
Specify a point: Click Point
k> KUrBhuekaNcarikkñúgrgVg;
EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 26
nisSitvisVkmµsMNg;suIvil km<uCa Cambodia Civil Engineering Student
Command: pol
POLYGON Enter number of sides <4>: 6
Specify center of polygon or [Edge]: Click Point
Enter an option [Inscribed in circle/Circumscribed about circle]
<I>: I
Specify radius of circle: 60
x> KUrBhuekaNcarikeRkArgVg;
Command: Pol
POLYGON Enter number of sides <6>: 6
Specify center of polygon or [Edge]: Click Point
Enter an option [Inscribed in circle/Circumscribed about circle]
<I>: c
Specify radius of circle: 70
K> KUrBhuekaNedayeRbIRbEvgRCug
Command: pol
Enter number of sides <1024>: 8
Specify center of polygon or [Edge]: e
Specify first endpoint of edge: Click Point
Specify second endpoint of edge: 100
30. Command: Construction Line (Draw Menu bars -> Construction Line)
eRbIsMrab;KUrbnÞat;KμanEdnkMNt;.
k> KUrbnÞat;edayeRbIBIrcMnuc
Command: xline
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: Click Point
Specify through point: Click Point
x> KUrbnÞat;CaGab;sIus
Command: xline
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V
Specify through point:
K> KUrbnÞat;CaGredaen
Command: xline
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V
Specify through point: Click Point
X> KUrbnÞat;CamMu
Command: xline
Specify a point or [Hor/Ver/Ang/Bisect/Offset]: a
Enter angle of xline (0) or [Reference]: 45
Specify through point: Click point
g> KUrbnÞat;eFobmMu
Command: xl
XLINE Specify a point or [Hor/Ver/Ang/Bisect/Offset]: b
Specify angle vertex point: 45
Specify angle start point: 45
Specify angle end point: 45
Specify angle end point: Click Point
Specify angle end point:
k> KUrbnÞat;eRcInedaykMNt;TMhM
Command: ml
MLINE
Current settings: Justification = Top, Scale = 200.00, Style =
STANDARD
Specify start point or [Justification/Scale/STyle]: s
Enter mline scale <200.00>: 200
Current settings: Justification = Top, Scale = 200.00, Style =
STANDARD
Specify start point or [Justification/Scale/STyle]: Click Point
Specify next point: Click Point
Specify next point or [Undo]:
x> KUrbnÞat;eRcInedayeRbIxagelI
Command: ML
Current settings: Justification= Top, Scale = 20.00, Style =
STANDARD
Specify start point or [Justification/Scale/STyle]: s
Enter mline scale <20.00>: 200
Current settings: Justification = Top, Scale = 200.00, Style =
STANDARD
Specify start point or [Justification/Scale/STyle]: j
Enter justification type [Top/Zero/Bottom] <top>: T
Current settings: Justification = Top, Scale = 200.00, Style =
STANDARD
Specify start point or [Justification/Scale/STyle]: Click Point
Specify next point: Click Point
Specify next point or [Undo]: Enter
K> KUrbnÞat;eRcInedayeRbIxageRkam
Command: ml
MLINE
Current settings: Justification = Top, Scale = 200.00, Style =
STANDARD
Specify start point or [Justification/Scale/STyle]: j
Enter justification type [Top/Zero/Bottom] <top>: b
Current settings: Justification = Bottom, Scale = 200.00, Style =
STANDARD
- Modify: sMrab;EkERb
- Rename: bþÚreQμaH
- Delete: sMrab;lub
- Description: sMrab;erobrab;
- Save: rkSaTuk
- Add: sMrab;bEnßmbnÞat;
- OK, Cancel
- Delete sMrab;lub
EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 30
nisSitvisVkmµsMNg;suIvil km<uCa Cambodia Civil Engineering Student
- Offset sMrab;kMNt;KMlat
- Color dak;B’NbnÞat;
- Ok: yl;RBm
36. Command: Mirror (Modify Menu bars -> Mirror)
eRbIsMrab;qøúH Object edaymancMnucG½kSeFobmYyCaeKal.
Command: mi
MIRROR
Select objects: Click Object
Select objects: Right Click
Specify first point of mirror line: Click Point
Specify second point of mirror line: Click Point
Erase source objects? [Yes/No] <N>: Enter
x> BnøÚtmþgeRcIn
Command: Ex
Select objects: Click Object
Select object to extend or shift-select to trim or [Project/Edge/
Undo]: F
First fence point: Click Object
Specify endpoint of line or [Undo]: Click Object
Specify endpoint of line or [Undo]: Click Object
Select object to extend or shift - select to trim or [Project/Edge/
Undo]: Enter
k>karkMNt;kaM
Command: F
FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Poly line /Radius/Trim/mUltiple]: R
Specify fillet radius <0.0000>: 6
Select first object or [Poly line/Radius/Trim/mUltiple]: Click
Object
Select second object: Click Object
K> CacMnYneRcIn
Command: F
FILLET
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <5.0000>: 20
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: m
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Click
Select second object or shift-select to apply corner: Click Object
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Click
Select second object or shift-select to apply corner: Click Object
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter
x> karkMNt;mMu
Command: Cha
CHAMFER
(TRIM mode) Current chamfer Dist1 = 4.0000, Dist2 = 3.0000
Select first line or [Poly line/Distance/Angle/Trim/Method/
mUltiple]: A
Specify chamfer length on the first line <0.0000>: 1000
Specify chamfer angle from the first line <0>: 45
Select first line or [Poly line/Distance/Angle/Trim/Method/
mUltiple]: Click Object
Select second line: Click Object
X> karRcitmþgcMnYneRcIn
EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 37
nisSitvisVkmµsMNg;suIvil km<uCa Cambodia Civil Engineering Student
Command: Cha
CHAMFER
(TRIM mode) Current chamfer Dist1 = 20.0000, Dist2 = 20.0000
Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/
Multiple]: A
Specify chamfer length on the first line <0.0000>: 1000
Specify chamfer angle from the first line <0>: 45
Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/
Multiple]: m
Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/
Multiple]: Click Object
Select second line or shift-select to apply corner: Click Object
Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/
Multiple]: Click Object
Select second line or shift-select to apply corner: Click Object
Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/
Multiple]: enter
x> karkMNt;emKuN
Command: Sc
SCALE
Select objects: Click Object
Select objects: Right Click
Specify base point: Click Point
Specify scale factor or [Reference]: R
Specify reference length <1.0000>: 1000
Specify new length or [Points] <1.0000>: 5000
44. Command: Divide (Draw Menu bars -> Point -> Divide)
eRbIsMrab;edAcMnuc rW EckcMnucenAelI Object .
k> EckCacMnuc
dMbUgeyIgRtUveRCIserIs Point Style Camunsin .
Command: Div
DIVIDE
Select object to divide: Click Object
Enter the number of segments or [Block]: 4
x> EckCacMnYnEdl)anbegáItTuk
dMbUgeyIgRtUvbegáIt Block mYyEdleyIgcg;eRbICamYy Divide CamunsineTIbeK
eRbI Divide Command )an.
Command: Div
DIVIDE
Select object to divide: Click Object
Enter the number of segments or [Block]: B
Enter name of block to insert: khin
Align block with object? [Yes/No] <Y>: Y
Enter the number of segments: 4
K> karEckedayminbgVi
Command: Div
DIVIDE
Select object to divide: Click Object
Enter the number of segments or [Block]: B
Enter name of block to insert: khin
45. Command: Measure (Draw Menu bars -> Point -> Measure)
eRbIsMrab;EckRbEvgGgát;EdlenAelI Object .
k> EckCacMnuc
Command: Me
Select object to measure: Click Object
Specify length of segment or [Block]: 100
x> EckCacMnYnEdl)anbegáItTuk
Command: Me
MEASURE
Select object to measure: Click Object
Specify length of segment or [Block]: B
Enter name of block to insert: khin
Align block with object? [Yes/No] <Y>: Y
Specify length of segment: 100
RsbRTnicnaLi
Command: Bo
BOUNDARY
Select internal point: Selecting everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Select internal point: Click Center Point
BOUNDARY created 1 poly line
begáItehIyRtUveRbI Command: Move edIm,IykrUbecj
48. Command: Area (Tools Menu bars -> Inquiry -> Area)
eRbIsMrab;KitRkLaépÞnigbrimaNrbs; Object .
k> KNnaRkLaépÞ
Command: aa
AREA
Specify first corner point or [Object/Add/Subtract]: O
Select objects: Click Object
Area = 100, Perimeter = 40
x> KNnaRkLaépÞbEnßm
Command: aa
AREA
Specify first corner point or [Object/Add/Subtract]: a
Specify first corner point or [Object/Subtract]: o
(ADD mode)Select objects: Click Object
Area = 2500.0000, Perimeter = 200.0000
Total area = 2500.0000 (ADD mode) Select objects: Click object
Area = 1600.0000, Perimeter = 160.0000
Total area = 4100.0000
(ADD mode) Select objects:
Specify first corner point or [Object/Subtract]:
TI1 TI2
K> KNnaRkLaépÞbnßy
Command: aa
AREA
Specify first corner point or [Object/Add/Subtract]: s
Specify first corner point or [Object/Add]: a
Specify first corner point or [Object/Subtract]: o
(ADD mode) Select objects: Click Object
Area = 2500.0000, Perimeter = 200.0000
Total area = 2500.0000
(ADD mode) Select objects: Right Click
Specify first corner point or [Object/Subtract]: s
Specify first corner point or [Object/Add]: o
(SUBTRACT mode) Select objects: Click Object
Area = 1600.0000, Perimeter = 160.0000
Total area = 900.0000
(SUBTRACT mode) Select objects:
Specify first corner point or [Object/Add]: Enter
TI1
TI2
49. Command: ID Point (Tools Menu bars -> Inquiry -> ID Point)
mantYnaTIsMrab;rk Coordinate rbs; Object mYyenAelI screen .
Command: id
Specify point: Click Object X = 100 Y = 200 Z = 0.00
Line
x>ctuekaNEkg
Command: li
LIST
Select objects: Click Object
Select objects: Right Click
51. Command: Text Style (Format menu bars -> Text Style)
eRbIsMrab;kMNt; RbePT TMhM GkSr.karkMNt;GkSrmansar³sMxan;kñúgkarsresr)aneRcIn
RbePTenAkñúgrUbEtmYy. dUcCakarkMNt;GkSrsMrab; elx Code kMNt; RbePTGkSrsMrab;sresr
cMNgeCIgepSg² l.kñúgrUbeKGacsresrCaGkSrExμrnigGkSr Englishk¾)an .
Command: St
52. Command: DTEXT (Draw Menu bars -> Text -> Single Line Text)
DTEXT mkBIBakü Dynamic Text KWeRbIsMrab;sresr Text EdlmancMnYnGkSrtic
dYcCasresrcMNgeCIgrbs;bøg;.eKGacbegáIt Text style eRcInRbsineKcg;eRbI Text style
NamYyenaHeKRtUv Activate Text style enaHCamunsin. cUleTAtarag Text style ehIyykeQμaH
Text style dak;elxeGayecjmkenAkénøg Style Name rYceRbI Command: Dtext CaeRsc.
Command: dt
TEXT
Current text style: "Standard" Text height: 5.2606
Specify start point of text or [Justify/Style]: Click Point
Specify height <5.2606>: 3
Specify rotation angle of text <0>: 0
Enter text: I love you
Enter text: Enter
53. Command: MTEXT (Draw Menu bars -> Text ->Multiline Text)
eRbIsMrab;sresrcMnYnGkSreRcInCYr.
Command: Mt
MTEXT Current text style: "Standard" Text height: 3
Specify first corner: Click Point
Specify opposite corner or [Height/Justify/Line spacing/Rotation/Style/
Width]: Click Point
bnÞab;mkeyIg)an Text Window or Multiline Text dUcxageRkam³
x> karbþÚrTMhMrgVg;
Command: -ch
CHANGE
Select objects: Click Object
Select objects: Right Click
Specify change point or [Properties]: -20
K> karbþÚrepSg²
Command: -ch
CHANGE
Select objects: Click Object
Select objects: Right Click
Specify change point or [Properties]: p
Enter property to change
[Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/Material/An
notative]: c
New color [Truecolor/COlorbook] <4 (cyan)>: red
Enter property to change
[Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/Material/An
notative]:
57. Dimension Style: (Format Menu bars ->Dimension Style)
(Dimension menu bar->style)
eRbIsMrab;kMNt;TMrg;énkarvas;Evgrbs;rUb.
Command: d
DIMSTYLE
- New: sMrab;begáIteQμaHfμIkMueGayCan;KñanigmanRbePTxusKña.
9 Continue sMrab;bnþedIm,IeRCIserIsEdlmanrUbxageRkam.
9 First: sMrab;eRCIserIsk,alRBYjTI1
9 Second: sMrab;eRCIserIsk,alRBYjTI2
9 Leader: sMrab;k,alRBYj
¾ Text: mantYnaTIsMrab;sresrGkSr
9 Text style: dUrRbePTGkSrb¤ Font
9 Text Color: sMrab;B’NGkSr
¾ Fit: sMrab;kMNt;TMhMGkSredaysV½yRbvtþi.
9 Precision: kMNt;CacMnYnKt;nigTsSn¾PaK
9 Prefix: dak;elxBImux
9 Suffix: dak;xageRkay
Command: dli
DIMLINEAR
Specify first extension line origin or <select object>:
Select object to dimension: Click Object
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click point
Dimension text = 1000
Command: dli
DIMLINEAR
Specify first extension line origin or <select object>: Click Object
Specify second extension line origin: Click Object
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: m
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point
Dimension text = 100
Command: dal
DIMLINEAR
Specify first extension line origin or <select object>:
Select object to dimension: Click Object
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click point
Dimension text = 1000
Command: dli
DIMLINEAR
Specify first extension line origin or <select object>: Click Object
Specify second extension line origin: Click Object
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: m
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point
Command: dli
DIMLINEAR
Specify first extension line origin or <select object>: Click Object
Select object to dimension: Click Object
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: a
Specify angle of dimension text: 45
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point
Dimension text = 100
Command: dra
DIMRADIUS
Select arc or circle: Click Object
Dimension text = 200
Specify dimension line location or [Mtext/Text/Angle]: a
Specify angle of dimension text: 60
Specify dimension line location or [Mtext/Text/Angle]: Click Point
Command: dra
DIMRADIUS
Select arc or circle: Click Object
Dimension text = 200
Specify dimension line location or [Mtext/Text/Angle]: m
Specify dimension line location or [Mtext/Text/Angle]: Click Point
Command: ddi
DIMDIAMETER
Select arc or circle: Click Object
Dimension text = 200
Specify dimension line location or [Mtext/Text/Angle]: m
Specify dimension line location or [Mtext/Text/Angle]: Click Point
Command: ddi
DIMDIAMETER
Select arc or circle: Click Object
Dimension text = 200
Specify dimension line location or [Mtext/Text/Angle]: a
Specify angle of dimension text: 45
Specify dimension line location or [Mtext/Text/Angle]: Click Point
66. Command: Quick Dimension (Dimension menu bars -> Quick Dimension)
eRbIsMrab;bþÚrTItaMg Dimension eTAtamtMrUvkar.
Command: qdim
Associative dimension priority = Endpoint
Select geometry to dimension: 1Found
Select geometry to dimension: Click Object
Specify dimension line position, or
[Continuous/Staggered/Baseline/Ordinate/Radius/Diameter/datum
Point/Edit/seTtings] <Continuous>: Click Point
69. Command: Dimension space (Dimension menu bars -> dimension space)
eRbIsMrab;eGayRbEvgenAcenøaHb¤cMgayBIKña.
k>karkMNt;Cak;lak;
Command: dimspace
Select base dimension: Click Object
Select dimensions to space: Click Object
Select dimensions to space: Click object
Enter value or [Auto] <Auto>: 100
x>karkMNt;sV½yRbvtþn¾
Command: dimspace
Select base dimension:
Select dimensions to space: Click Object
Select dimensions to space: Click object
Enter value or [Auto] <Auto>:
x>karRtlb;eRkay
Command: dimbreak
Select dimension to add/remove break or [Multiple]: m
Select dimensions: Specify opposite corner: 2 found
Select dimensions: Click Object
Select object to break dimensions or [Auto/Remove] <Auto>: r
1 object modified
K>karkat;tamkMNt;
Command: dimbreak
Select dimension to add/remove break or [Multiple]: Click Object
Select object to break dimension or [Auto/Manual/
Remove] <Auto>: m
Specify first break point: Click Point
Specify second break point: Click Point
1 object modified
74. Command: Jogged linear (Dimension menu bars -> jogged linear)
eRbIsMrab;dak;m:Ud Dimension
Command: dimjogline
Select dimension to add jog or [Remove]: Click Object
Specify jog location (or press ENTER):
x> karRtlb;mkedImvij
Command: dimedit
Enter type of dimension editing [Home/New/Rotate
/Oblique] <Home>: h
Select objects: Click Object
Select objects:
K> karbgVil
Command: dimedit
Enter type of dimension editing [Home/New/Rotate/
Oblique] <Home>: r
Specify angle for dimension text: 60
Select objects: Click Object
Select objects: Right Click
X> karbgVilr)ar
Command: dimedit
Enter type of dimension editing [Home/New/Rotate/Oblique]
<Home>: o
Select objects: Click Object
Select objects: Right Click
Enter obliquing angle (press ENTER for none): 45
76. Command: Dimension Text Edit (Dimension menu bars ->Dimension Text Edit)
eRbIsMrab;EkERbGkSrrbs; Dimension .
k> karbþÚrelx Code xageqVg
Command: dimtedit
Select dimension: Click Object
Specify new location for dimension text or [Left/Right/ Center/
Home/Angle]: L
g> karbþÚrelxRtlb;mkedImvij
Command: dimtedit
Select dimension: Click Object
Specify new location for dimension text or [Left/Right/Center/
Home/Angle]: h
Command: xref
• AttachsMrab;Tajyk File mk
• Detach dk File ecjvijBI Attach
Command: _image
• AttachsMrab;Tajyk File mk
• Detach dk File ecjvijBI Attach
>
79 Command: Draw order (Tools menu bars -> Draw order)
eRbIsMrab;bBa¢ÚnnigRtlb; Object
k>bBa©ÚneTAeRkay
Command: draworder
Select objects: Click Object
Select objects: Right Click
Enter object ordering option [Above objects/Under objects/ Front/
Back] <Back>: B
>
80 Command: Edit hatch (Modify -> Object->Edit hatch)
eRbIsMrab;Ekb¤pøas;bþÚr hatch .
Command: hatchedit
Select hatch object: Click Object
>
81 Command: Edit Polyline (Modify -> Object->Poly line)
Command: pedit
Select polyline or [Multiple]: m
Select objects: Click Object
Specify opposite corner: 4 found
Select objects: Right Click
Convert Lines and Arcs to polylines [Yes/No]? <Y>
Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype
gen/Undo]: J
Join Type = Extend
Enter fuzz distance or [Jointype] <0.0000>:
3 segments added to polyline
Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype
gen/Undo]:
>
82 Command: Edit Spline (Modify -> Object->Spline)
>
83 Command: pedit
eRbIsMrab;Ekb¤pøas;bþÚr object.
Command: pe
PEDIT Select polyline or [Multiple]: m
Select objects: Click Object
Select objects: Right Click
Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/
Ltype gen/Undo]: w
Specify new width for all segments: 10
Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]:
>
84 Command: Layer (Format menu bars->Layer)
- Name: eRbIsMrab;dak;eQμaH
- On: eRbIsMrab;biTnigebIk
- Lock: eRbIsMrab;cak;esar
- Color: eRbIsMrab;dak;B’N
>
85 Command: Layoff
eRbIsMrab;lak;biT Object .
Command: layoff
Current settings: Viewports=Off, Block nesting level=Block
Select an object on the layer to be turned off or [Settings/
Undo]: Click Object
Layer "Wall" is current, do you want to turn it off? [Yes/No] <No>: Y
Layer "Wall" has been turned off.
Select an object on the layer to be turned off or [Settings/Undo]:
>
86 Command: Layon
eRbIsMrab;ebIk Object .
Command: layon
Warning: layer "Layer1" is frozen. Will not display until thawed.
All layers have been turned on.
>
87 Command: Layout (Insert menu bars -> Layout)
eRbIsMrab;begáItTMrg;RkdasnigerobcMkic©karbBa©ab;.
k>karbegáIt Layout
Command: layout
Enter layout option [Copy/Delete/New/Template/Rename/ SAveas
/Set/?] <set>: n
Enter new Layout name <Layout2>: khin
x>karlub Layout
Command: layout
Enter layout option [Copy/Delete/New/Template/Rename/SAveas/
Set/?] <set>: d
Enter name of layout to delete <Layout1>: khin
Layout "khin" deleted.
K>karftcMlg Layout
Command: LAYOUT
Enter layout option [Copy/Delete/New/Template/Rename/SAveas
/ Set/?] <set>: c
Enter name of layout to copy <khin>:
Enter layout name for copy <khin (2)>: Norton
Layout "khin" copied to "norton".
X>karbþÚreQμaH Layout
Command: LAYOUT
Enter layout option [Copy/Delete/New/Template/Rename/SAveas/
Set/?] <set>: r
Enter layout to rename <khin>:
Enter new layout name: nu
Layout "khin" renamed to "nu".
g>karrkSaTuk Layout
Command: LAYOUT
Enter layout option [Copy/Delete/New/Template/Rename/SAveas/
Set/?] <set>: sa
Enter layout to save to template <Layout1>:
>
88 Command: Print (Files menu bars -> Layout)
eRbIsMrab;e)aHBum<kic©karecjmkeRkAedIm,IseRmckargarcugeRkay.
Command: print
Page Setup
-Name:kareRCIseQμaHEdl)ankMNt;kñúgkare)aHBum<
-Add…: karbEnßmeQμaHkñúgkar e)aHBum<
Ok :