Professional Documents
Culture Documents
Control Evaluation
Control Evaluation
The experimental setup contains Pump Unit, Pressure Relief Valve, check Valve,
manometer, shut-off Valve, Double Acting Hydraulic Cylinder, and 4/2-way Hand-lever
Valve.
As per diagram shows, the system is a continuous flow up to actuator, the double acting
hydraulic cylinder. No cut off of the flow unless the when the shut -off valve is adjusted
to zero.
Fluid starts to flow from the pump unit directly to the check valve to make it one way
flow as it reaches the actuator.
Connected to that is the Shut-off valve to regulate amount of pressure entering the lever
valve up to the cylinder
Supporting the shut-off valve limited amount of pressure, the flow goes to the pressure
relief valve which will limit the right amount of fluid that will flow according to shut-off
valve amount of opening.
Finally, the fluid flow will enter the 4/2-way hand lever valve which its initial position is
engage in connection port P to port B making the double-acting hydraulic cylinder extend
and port T to port A for the pressure to return.
As the the fluid flow will enters the 4/2-way hand lever valve, cinfigurating this vave to
its its second position will make connection port P to port A making the double-acting
hydraulic cylinder reurn to its original position and port T to port B for the pressure to
return.
The experimental setup contains Pump Unit, Pressure Relief Valve, check Valve,
manometer, shut-off Valve, Double Acting Hydraulic Cylinder, and 4/2-way Hand-lever
Valve.
As per diagram shows, the system is a continuous flow up to actuator, the double acting
hydraulic cylinder. No cut off of the flow unless the when the shut -off valve is adjusted
to zero.
Fluid starts to flow from the pump unit directly to the check valve to make it one way
flow as it reaches the actuator.
Connected to that is the Shut-off valve to regulate amount of pressure entering the lever
valve up to the cylinder
Supporting the shut-off valve limited amount of pressure, the flow goes to the pressure
relief valve which will limit the right amount of fluid that will flow according to shut-off
valve amount of opening.
Finally, the fluid flow will enter the 4/2-way hand lever valve which its initial position is
engage in connection port P to port B making the double-acting hydraulic cylinder extend
and port T to port A for the pressure to return.
As the the fluid flow will enters the 4/2-way hand lever valve, cinfigurating this vave to
its its second position will make connection port P to port A making the double-acting
hydraulic cylinder reurn to its original position and port T to port B for the pressure to
return.