Professional Documents
Culture Documents
Centrifugal Pumps With Open Impeller: Installation and Use Performance Range
Centrifugal Pumps With Open Impeller: Installation and Use Performance Range
Centrifugal Pumps With Open Impeller: Installation and Use Performance Range
Domestic use
Agricultural use
Industrial use
CERTIFICATIONS
Company with management system certified DNV
ISO 9001: QUALITY
50
124Hz | NGA
CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz n= 2900 min-1 HS= 0 m
0 25 50 75 US g.p.m.
0 25 50 75 Imp g.p.m.
25 feet
70
20 NGA1A
60
NGA1B
Head H (metres) 4
50
15
η = 65%
40
10
30
20
5
10
MEI≥ 0.40
0 0
0 50 100 150 200 250 300 350 l/min
0 5 10 15 20 m³/h
Flow rate Q 4
Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B.
NGA | 50125
Hz
NGA
POS. COMPONENT CONSTRUCTION CHARACTERISTICS
1 PUMP BODY Cast iron complete with threaded ports in compliance with ISO 228/1
8 ELECTRIC MOTOR NGAm: single-phase 230 V - 50 Hz with thermal overload protector incorporated into the winding.
NGA: three-phase 230/400 V - 50 Hz.
➠ The three-phase pumps are fitted with high performance motors in class IE3 (IEC 60034-30-1)
– Insulation: class F
– Protection: IP X4
6 7 6
3 5 4 8
50
126Hz | NGA
DIMENSIONS AND WEIGHT
DN2
a
h2
h3
DN1
h1
w s
n2
f n1
ABSORPTION
NGAm 1B 5.6 A 5.3 A 11.2 A NGA 1B 3.3 A 1.9 A 1.1 A 3.2 A 1.85 A 1.1 A
NGAm 1A 6.2 A 6.0 A 12.0 A NGA 1A 3.7 A 2.1 A 1.2 A 3.6 A 2.05 A 1.2 A
NGA | 50127
Hz