Professional Documents
Culture Documents
JS1000 Joystick Base
JS1000 Joystick Base
Joystick
JS1000 Joystick Base
Environmental sealing
The JS1000 joystick base is designed and tested for
use in harsh out of cab environments. It meets IP 67
environmental protection below the panel mount if
the vent plug is installed. The vent plug is a base
option. If it is not ordered, the base is not protected
from below-panel particulate and moisture ingress.
Environmental protection above the panel mount is
IP 67 with the exception of the Pro grip option. The
Pro grip is for in machine cab use only.
Features
Increasing
Pin 4 CAN low Y output signal
Decreasing Decreasing
Increasing
X Y
Pin 5 CAN shield Rocker switch
[6.55 ±0.04]
X Y
166.0 ±1
74.2 ±0.5 DIA Pin 6 No connection No connection
[2.92 ±0.02]
[0.37 ±0.02]
9.4 ±0.5
Electrical characteristics
Ø59.4 ±0.5
[2.1 ±0.02]
53.46 ±0.5
6.35 ±0.5
[2.34 ±0.02]
Resolution Infinite
Supply voltage (Vs) Analog output: 5 ± 0.5 Vdc
4 x Ø4.57±0.05
CAN: 9 to 32 Vdc
Increasing
[0.180 ±0.002] X Pin 6
Output Analog: 0.5 to 4.5 Vdc nominal
R2.0 ±0.5
[0.08 ±0.02]
CAN: 2.0 B, J1939 protocol
[2.25 ±0.005]
25 mA
57.15 ±0.12
[2.75 ±0.02]
Decreasing
Current consumption
69.85 ±0.5
Increasing
Y Y
PRO grip = 150 mA
[1.38 ±0.02]
[1.125 ±0.005]
34.92 ±0.5
28.58 ±0.12
Mechanical characteristics
28.58 ±0.12
Pin 1
[1.125 ±0.005]
57.15 ±0.12 Lever mechanical angle ±18° on axis
[2.25 ±0.005]
34.92 ±0.5
[1.38 ±0.02]
Operating life > 10 million cycles
Motion
69.85 ±0.5
Multiaxis (X and Y)
Single Axis (Y only) [2.75 ±0.02] Vibration 7.67 Gs RMS
Decreasing Shock 50 Gs
X P005 244E
Weight (base without grip) 0.38 kg [0.838 lb]
Ball Grip
[0.08 ±0.02]
Decreasing Increasing
Protection Above panel ball grip: IP 67
Y Y
(PRO grip IP 43 and IP 40 with
Increasing
proportional roller function)
X
Below panel: IP 67 with vent plug
69.85 ±0.5
[2.75 ±0.02] installed
18o REF 18o REF
18o REF 18o REF EMI/RFI rating 100 V/m
Decreasing
Y
Increasing Increasing Decreasing Mating connector assemblies
Y X X
[3.41 ±0.02]
86.61 ±0.5
3.8 [0.15]
Max panel
Type Danfoss part number
Feed-Thru MTG
6 pin DEUTSCH connector 10101551
bag assembly
[2.35 ±0.02]
Ø59.4 ±0.05
59.6 ±0.5
[0.25 ±0.02]
[2.34 ±0.002]
Pin 6
Pin 1
Mating connector DEUTSCH DTM06-6S P005 243E
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.