Professional Documents
Culture Documents
DS Medapoxy Mortier Sol
DS Medapoxy Mortier Sol
The information given in this data sheet is based on our knowledge and our experiment to date. They are given for indication.
It belongs to the customer to ensure that this product suits to the intended usage.
Granitex
Zone industrielle Oued Smar – BP85 Oued Smar – 16270 Alger
Tél : (213) 021 51 66 81 & 82
Fax : (213) 021 51 64 22 & 021 51 65 23
www.granitex.dz - E-mail: granitex@granitex.dz
Data sheets 3 3 0 5
IMPREGNATION
DRYING TIME
On concrete, mortar or tiling surfaces, the primer
MEDA-IMPREGNATION is used to prime 10°C 20°C 30°C
(impregnate) the substrate in order to improve its
characteristics and close the surface porosity to Tack free 10 hr 6 hr 4 hr
avoid the bubbling phenomenon. Accepts light
When MEDA-IMPREGNATION has set for 4 days 2 days 1 day
foot traffic
approximately 6 to 8 hours but no more than 24
Accepts heavy
hours and is tack free, the MEDAPOXY MORTIER 6 days 5 days 2 days
traffic
can be applied. A longer setting will make abrading
of the MEDA-IMPREGNATION necessary for proper Full cure 20 days 17 days 10 days
adhesion.
By hot weather it is necessary to reduce the time of Caution: Full chemical resistance is obtained only
setting of the MEDA-IMPREGNATION. after full cure.
MAINTENANCE
MIXING For maximum life expectancy, routinely sweep and
The mixed product has a limited pot life ; the potlife wash floors with conventional cleansers and
of the mixture is of 1hr30 at 20°C and 45 minutes at detergents. All abrasive grit and corrosive spills
30°C; complete all preparations before starting the should wiped as soon as possible.
mixing sequence and prepare only the quantity of
Avoid the use of solvents or thinners based on
mixture which can be used during this time.
acetone (MIBK, MEK) and on toluene because they
It is very important to properly mix the three
can deteriorate the coating aspect.
components of MEDAPOXY MORTIER in order to
get a homogeneous mixture and to completely When the surface film of the coating, the gloss or the
empty the containers in order to ensure the correct color begins to show signs of wear, the dustproofing
mixing ratios. quality and resistance of the floor will still remain
- Pour the entire contents of component B intact.
(hardener) into component A (resin), being Damaged or worn areas of the coating may be
careful not to spill any material. renovated by reapplying MEDAPOXY MORTIER to
regain original gloss and protection.
- Mix with a Jiffy blade and an electric drill at very
low speed for 3 to 5 minutes.
PACKAGING AND STORAGE
- Add progressively component C until getting an
unctuous mortar. MEDAPOXY MORTIER is delivered in a 20 kg package :
If you do not mix the totality of the package ensure Component A: 3 kg
you abide to the correct mixing ratio. Component B: 2 kg
Component C : 15 kg
APPLICATION Shelf life is 1 year in unopened containers when
Apply using a notched spatula or a spreader. stored in a cool, dry area.
Granitex
Zone industrielle Oued Smar – BP85 Oued Smar – 16270 Alger
Tél : (213) 021 51 66 81 & 82
Fax : (213) 021 51 64 22 & 021 51 65 23
www.granitex.dz - E-mail: granitex@granitex.dz