Professional Documents
Culture Documents
Permco Pag27
Permco Pag27
from front
7. Hold opposite end of spool 8. Apply a light coating of 9. Slide pressure cap over
and push on piston assembly grease to quad seal ring. Slip assembly and push tight against
until piston hole lines up with snap ring onto clevis pin to valve body. Tighten cap screws
hole in valve spool. Slide clevis secure it. finger tight. Shift spool back and
pin into hole. forth to assure centering of
air shft.
-
Ara air dryer or water Nter
18. Alternating cross corners, 11. Install air lines from valve in is recommended in air
torque cap screws to 24 ft. lbs. cab to air cylinder. supply for cold weather
27 N.P. T.
operation.
Be sure O-ring is
in proper position
in groove in valve
housing before
starting assembly.