Professional Documents
Culture Documents
N236 - Spec
N236 - Spec
JSR N236H is a Medium Acrylonitrile rubber with about 32% Acrylonitrile content. This grade has medium high mooney
and excellent green strength. This grade is prepared to possess improved process ability and excellent low mould fouling.
N236H is designed for moulded products. This grade shows less mould-fouling, smooth extrusion and exhibit good
compression set and superior heat resistance.
N236H is suitable for various goods such as Packing’s, Gaskets, O-Rings, Oil Seals, Diaphragms, Rolls, Oil Resistant hoses,
various industrial goods such as spinning rolls, Rice Rolls, Printing Rolls, Lining, Safety Shoes, Adhesives & Plastic
modifiers for PVC (NV)etc…
Mechanical Properties
TB MPa/(kgf/cm2) 21.8/222
EB (%) 370
Hs (Shore A) 73
M100 (MPa)/(kgf/cm2) 3.6/37
M300 (MPa)/(kgf/cm2) 17.8/181
Vulcanizate properties
ASTM No 1 Oil, 1200C x Sc (TB) (%) -5
70 hrs Sc (EB) (%) -27
CH +1
Δ V (%) -1
ASTM No 3 Oil, 1200C x Sc (TB) (%) -23
70 hrs Sc (EB) (%) -25
CH -12
Δ V (%) +24
Air Test in Air AC(TB) (%) -1
1200C x 70 hours AC(TB) (%) -34
AH +6
Fuel B 400C x 48 hrs Sc (TB) (%) -63
Sc (EB) (%) -55
CH -13
Δ V (%) +34
Fuel C Δ V (%) +60
Fuel C/Ethanol 80/20 Δ V (%) +90
Distilled Water 700C x Δ V (%) +2
70 hrs
Compression Set 1000C CS (%) 10
70 hours 1200C CS (%) 16
Teat Strength ASTM-C TR (KN/m)/(kgf/cm) 48/49
Permanent Set at 2000C PS (%) 3
elongation
Rebound Resilience R (%) 39
Flex Cracking Test Appearance 1000 times 50
Cut Growth 2-15mm 1000 times 2
Goodrich Flexometer Δ T (0C) 23
Brittle Temperature Tb (0C) -32
Low Temperature Flex T10 (0C) -25
Gehman T100 (0C) -31
Abrasion Pico Index SBR1500 = 100 65
Ozone Cracking Test Static 20% Elongation C-3
50 pphm 400C x 5 hours Dynamic 0-20% Elongation C-3
Formula: N236H 100, ZnO 5, St Acid 1, SRF Black 40, Accelerator MBTS 1, Sulfur 2, Total 148.5