Professional Documents
Culture Documents
List of Industry Standards From NORSOK
List of Industry Standards From NORSOK
ARJ/NOR/NORref/doc 1 28/07/00
API 5L Specification for Line Pipe. To be replaced by ISO M-001
3183-3 when available.
API 5L M-630
API 610 Centrifugal Pumps for General Refinery Service. R-001
(Replace with ISO 13709 when issued)
API 610 Centrifugal Pumps for General Refinery Services. R-100
(Replace with ISO 13709 when issued)
API 613 Special Purpose Gear Units for Refinery Service R-001
(Replace with ISO 13711 when issued).
API 614 Lubrication, Shaft Sealing and Control - Oil Systems R-001
for Special Purpose Applications. (Replace with ISO
10438 when issued)
API 616 Gas Tubines for Refinery Services. R-001
API 616 Type H Industrial Combustion Gas Turbines for R-100
Refinery Services. (Replace with ISO 3977 when
issued)
API 617 Centrifugal Compressors for General Refinery Service. R-001
(Replace with ISO 10439 when issued)
API 617 Centrifugal Compressors for General Refinery Service R-001
(Replace with ISO 10439 when issued).
API 617 Centrifugal Compressors for General Refinery Services R-100
(Replace with ISO 13711 when issued)
API 618 Reciprocating Compressors for Petroleum, Chemical R-001
and Gas Industry Services (Replace with ISO 13707
when issued).
API 619 Rotary - type Positive Displacement Compressors for R-100
General Refinery Service. (Replace with ISO 10440
when issued).
API 650 Welded Steel Tanks for Oil Storage. R-001
API 670 Non-contacting Vibration and Axial Position R-001
Monitoring System.
API 674 Positive Displacement Pumps Reciprocating. (Replace R-001
with ISO 13710 when issued)
API 675 Positive Displacement Pumps Controlled Volume. R-001
API 676 Positive Displacement Pumps Rotary. R-001
API 678 Accelerometer Based Vibration Monitoring System. R-001
API 6A Drilling and Production Equipment - Specification for M-001
Valves, Wellhead and Christmas tree equipment. To be
replaced by next revision of ISO 10423 when
available.
API 6A 60K M-630
API 6D Specification for Pipeline Valves, Steel Gate, Plug, U-CR-001
Ball and Check Valves (To be replaced by ISO 14313)
API Bulletin 5C3 Formulas and calculations for casing, tubing, drill pipe D-010
and line pipe properties
API MPMS Ch. 4, 5, also ch. 11 - 13, if applicable. I-CR-100
API MPMS Ch. 4, 5 also ch. 11-13, if applicable. I-SR-105
API MPMS, clause 10.9 (corresponds to IP 386/90) I-CR-100
API MPMS, clause 10.9 (corresponds to IP 386/90) I-SR-100
API MPMS, clause 8.2 Automatic sampling of petroleum and petroleum I-CR-100
products.
API MPMS, clause 8.2 Automatic sampling of petroleum and petroleum I-SR-100
products.
API RP 14C Recommended practice for analysis, design, D-SR-007
installation and testing of basic surface safety systems
on offshore production platforms
API RP 14C Analysis, Design, Installation and Testing of Basic P-001
ARJ/NOR/NORref/doc 2 28/07/00
Surface Safety Systems on Offshore Production
Platforms. (New revision of ISO 10418 to be used,
when issued in 1999).
API RP 14E Recommended practice for design and installation of D-SR-007
offshore production platform piping systems
API RP 16E Design of control systems for drilling well control D-SR-005
equipment.
API RP 17A Design and Operation of Subsea Production Systems U-DP-001
API RP 17B Flexible pipe U-DP-001
API RP 17F Subsea Control System Eq. U-DP-001
API RP 17G Recommended Practice for Design and Operation of U-CR-003
Completion/Work-over Riser Systems (will be replaced
by ISO 13628 Part 5)
API RP 17G Completion/Workover Riser System U-DP-001
API RP 17H ROV Interface with Subsea Equipment U-DP-001
API RP 17J Specification for unboned Flexible Pipe. M-001
API RP 2A Recommended practice for planning, designing and N-001
constructing fixed offshore platforms.
API RP 2N Recommended practice for planning, designing and N-001
constructing fixed offshore structures in ice
environments.
API RP 2SK Recommended practice for design and analysis of N-001
station keeping systems for floating structures.
API RP 2T Recommended practice for planning, designing and N-001
constructing tension leg platforms.
API RP 2X Ultrasonic examination of offshore structural M-101
fabrications.
API RP 44 Recommended practice for sampling petroleum D-SR-007
reservoir fluids
API RP 520 Recommended practice for sizing, selection and D-SR-007
installation of pressure-relieving devices in refineries
API RP 520 Sizing, Selection ,and Installation Of Pressure- I-001
Relieving Devices in Refineries, Part Ι and ΙΙ.
API RP 520 Sizing, Selection and Installation of Pressure - P-001
Relieving Systems in Refineries
API RP 520 Design and installation of pressure relieving systems in P-100
refineries.
API RP 521 Guide for Pressure - Relieving and Depressuring P-001
Systems.
API RP 521 Guide for pressure relieving and depressuring systems. P-100
API RP 521 Guide for pressure - reliving and depressing system. S-DP-001
API RP 526 Flanged steel safety relief valves. I-001
API RP 527 Seat Tightness of Pressure Relief Valves. I-001
API RP 53 Recommended practice for blow-out prevention D-SR-005
equipment systems for drilling wells
API RP 53, 64 D-SR-022
API RP 670 Vibration, axial position and bearing temperature I-001
system.
API RP 678 Accelerometer-based Vibration Monitoring System. I-001
API RP 7G Recommended practice for drill stem design and D-SR-007
operating limits
API RP 7G Recommended practice for drill stem design and M-701
operating limits. (Will be replaced by ISO 10407,
Drilling and production equipment - Drill stem design
and operating limits, tentatively to be issued as Draft
International Standard (DIS) October 1997.)
API Spec 17D Specification for Subsea Wellhead and Christmas Tree U-CR-003
ARJ/NOR/NORref/doc 3 28/07/00
Equipment (will be replaced by ISO 13628 Part 4)
API Spec 4F (Replace with ISO 13626 in development) D-SR-001
API Spec 4F D-SR-004
API Spec 5CT Specification for casing and tubing D-SR-007
API SPEC 6 A Specification for Wellhead and Christmas Tree D-CR-003
Equipment.
API SPEC 6FB Specification for Fire Test for End Connections. D-CR-003
API SPEC 6FC Specification for Fire Test for valves with selective D-CR-003
back seats.
API Spec 7 (for IBOP) D-SR-002
API Spec 7K D-SR-001
API Spec 7K (for rotary tables) (Replace with ISO 10424 in D-SR-002
development)
API Spec 7K (Replace with ISO 10 424 in development) D-SR-004
API Spec 8C PSC 2 (Replace with ISO 13535 in development) D-SR-001
API Spec 8C (for load bearing parts (Replace with ISO 13535 in D-SR-002
development)
API Spec 9A (Replace with ISO 10425 in development) D-SR-001
API Spec 9A Specification for Wire Rope D-SR-008
API Spec. 14A Specification for sub surface safety valve equipment D-SR-007
API Spec. 16A (will be replaced by ISO 13533 in development) D-SR-022
API Spec. 17D Subsea Wellheads and Trees U-DP-001
API Spec. 17E Subsea Control Umbilicals U-DP-001
API Spec. 6A Specification for valves and wellhead equipment D-SR-007
API Spec. 7 for rotary drilling equipment (replace with ISO 424 in D-SR-013
development)
API Spec. 7 (will be replaced by ISO 10424 in development) D-SR-022
API Spec. 7 Specification for rotary drilling equipment. (Will be M-CR-702
replaced by ISO 10424, Drilling and production
equipment - Specification for rotary drilling equipment,
tentatively to be issued as DIS March 1997).
APISPEC 16D, 16E D-SR-022
Arbeidstilsynet Best. nr. 391 Arbeidslokaler og personalrom H-CR-001
Arbeidstilsynet Best. nr. 420 Luftforurensing ved buesveising. H-CR-001
Arbeidstilsynet Best. nr. 444 Klima og luftkvalitet på arbeidplassen. (Order no. 516, H-CR-001
Climate and air quality in the workplace)
ASHRAE Handbook of fundamentals. H-CR-001
ASME B 16.20 L-CR-001
ASME B 16.5 L-CR-001
ASME B 2.1 Pipe threads, general purpose L-CR-004
ASME B 31.3 Process Piping L-002
ASME B 31.3 Process Piping L-CR-001
ASME B 31.3 Chemical plant and petroleum refinery piping L-CR-004
ASME B 31.3 Process Piping. M-001
ASME B 31.3 Process Piping M-601
ASME B 31.3 Chemical Plant and Petroleum Refinery Piping U-CR-001
ASME B 31.3 Chemical Plant and Petroleum Refinery Piping U-CR-006
ASME B 31.4 Chemical Plant and Petroleum Refinery Piping U-CR-001
ASME II Boiler and Pressure Vessel Code, M-601
Section II, Part C - Welding Rods, Electrodes, and
Filler Metals
ASME IX Section IX - Welding and Brazing Qualification. M-601
ASME IX Welding and brazing qualification M-650
ASME IX Section IX - Welding and Brazing Qualification M-701
ASME IX Welding and brazing qualification U-CR-006
ASME PTC 10 Power Test Code - Compressors and Exhausters. R-001
ARJ/NOR/NORref/doc 4 28/07/00
ASME PTC 22 Performance Test Code - Gas Turbine Power Plants. R-001
ASME V Non-destructive testing. M-101
ASME V Non-destructive testing. M-102
ASME V Section V - Non-destructive testing M-601
ASME V Boiler and Pressure Vessel Code, Section V - Non- M-701
destructive testing
ASME V Boiler and Pressure Vessel Code Non-Destructive U-CR-006
Examination
ASME VIII for pulsation dampener and H.P. partrs D-SR-013
ASME VIII Boiler and pressure vessel code - Section VIII, Div. 1. I-001
ASME VIII SectionVIII - Rules for Construction of Pressure M-601
Vessels Div. 1
ASME VIII Section VIII - Rules for Control of Pressure Vessels M-701
Div. 1
ASME VIII Boiler and Pressure vessel code P-001
ASME VIII Boiler and Pressure Vessel Code. R-001
ASME VIII Boiler and Pressure Vessel Code, section VIII division R-100
1 & 2.
ASME VIII Div. 1 and 2 Rules for construction of pressure vessels D-SR-007
ASTM A 105 L-CR-001
ASTM A 105 M-630
ASTM A 106 L-CR-001
ASTM A 106 M-630
ASTM A 106B L-CR-001
ASTM A 182 L-CR-001
ASTM A 182 M-630
ASTM A 193 L-CR-001
ASTM A 193 Specification for Alloy-Steel and Stainless Steel M-001
Bolting Materials for High-Temperature Service.
ASTM A 194 L-CR-001
ASTM A 194 Specification for Carbon and Alloy Steel Nuts for Bolts M-001
for High-Pressure and High-Temperature Service.
ASTM A 216 M-630
ASTM A 234 L-CR-001
ASTM A 234 L-CR-001
ASTM A 234 L-CR-001
ASTM A 234 M-630
ASTM A 240 L-CR-001
ASTM A 240 L-CR-001
ASTM A 240 M-630
ASTM A 240 M-630
ASTM A 240 UNS 31803 Heat-Resisting chromium and chromium-nickel C-002
stainless steel plate, sheet, and strip for pressure
vessels.
ASTM A 269 M-630
ASTM A 276 M-630
ASTM A 312 L-CR-001
ASTM A 312 M-630
ASTM A 320 L-CR-001
ASTM A 320 Specification for Alloy Steel Bolting Materials for Low M-001
- Temperature Service.
ASTM A 333 L-CR-001
ASTM A 333 M-630
ASTM A 350 L-CR-001
ASTM A 350 M-630
ASTM A 351 M-630
ARJ/NOR/NORref/doc 5 28/07/00
ASTM A 352
ASTM A 352 M-630
ASTM A 358 L-CR-001
ASTM A 358 M-630
ASTM A 370 Test methods and definitions for mechanical testing of D-SR-005
steel products.
ASTM A 370 Mechanical Testing of Steel Products M-701
ASTM A 388 Practice for Ultrasonic Examination of Heavy Steel M-701
Forgings
ASTM A 403 L-CR-001
ASTM A 403 M-630
ASTM A 420 L-CR-001
ASTM A 420 M-630
ASTM A 450 Specification for general requirements for carbon, D-SR-005
ferritic alloy, and austenitic alloy steel tubes.
ASTM A 450 General Requirements for Carbon, Ferritic Alloy and U-CR-006
Austenitic Alloy Steel Tubes
ASTM A 487 M-630
ASTM A 487 M-630
ASTM A 516 L-CR-001
ASTM A 516 M-630
ASTM A 519 M-630
ASTM A 671
ASTM A 671 L-CR-001
ASTM A 671 M-630
ASTM A 672 L-CR-001
ASTM A 672 M-630
ASTM A 694
ASTM A 694 M-630
ASTM A 703 Steel Castings, General Requirements, for Pressure- M-650
Containing Parts
ASTM A 788
ASTM A 788 M-630
ASTM A 789 M-630
ASTM A 789 CIGRE Recommendation published in Electra no. 68 U-CR-006
ASTM A 790 L-CR-001
ASTM A 790 L-CR-001
ASTM A 790 M-630
ASTM A 815 L-CR-001
ASTM A 815 M-630
ASTM A 860
ASTM A 860 M-630
ASTM A 890
ASTM A 890 M-630
ASTM A 928 L-CR-001
ASTM A 928 M-630
ASTM B 148 M-630
ASTM B 151 M-630
ASTM B 171 M-630
ASTM B 265 L-CR-001
ASTM B 265 M-630
ASTM B 338 M-630
ASTM B 348 M-630
ASTM B 363 L-CR-001
ASTM B 363 M-630
ASTM B 366 M-630
ARJ/NOR/NORref/doc 6 28/07/00
ASTM B 367 M-630
ASTM B 381 L-CR-001
ASTM B 381 M-630
ASTM B 443 M-630
ASTM B 444 M-630
ASTM B 446 M-630
ASTM B 466 M-630
ASTM B 467 M-630
ASTM B 494 M-630
ASTM B 564 M-630
ASTM B 705 M-630
ASTM B 861 L-CR-001
ASTM B 861 M-630
ASTM B 862 L-CR-001
ASTM B 862 M-630
ASTM C 552 Cellular Glass Block and Pipe Thermal Insulation. R-CR-004
ASTM C 592 Ceramic Fibre Blanket Insulation for Pipes and R-CR-004
Vessels.
ASTM D 1043 Test Method for Stiffness Properties of Plastics as a M-CR-710
Function of Temperature by means of a Torsion Test.
ASTM D 1141 Specification for Substitute Ocean Water M-501
ASTM D 1141 Specification for substitute ocean water. M-501
ASTM D 1141 Specification for substitute ocean water. M-CR-710
ASTM D 1414 Methods of Testing Rubber O-rings M-CR-710
ASTM D 1525 Test Method for Vicat Softening Point for Plastics. M-CR-710
ASTM D 1650 Method of sampling and testing shellac varnish. M-501
ASTM D 1945 Analysis of natural gas by gas chromatography I-SR-106
ASTM D 2240 Test Method for Rubber Property - Durometer M-CR-710
Hardness
ASTM D 2990 Test Methods for Tensile, Compressive and Flexural M-CR-710
Creep and Creep Rupture Test of Plastics.
ASTM D 2992 Practice for Obtaining Hydrostatic or Pressure Design M-001
Basis for Fibreglass Pipe and Fittings.
ASTM D 3032 Method of Testing Hook-up Wire Insulation) M-CR-710
ASTM D 3681 Standard test method for chemical resistance of M-621
reinforced thermosetting resin pipes in a deflected
condition.
ASTM D 395 Test Method for Rubber Property - Compression Set M-CR-710
(method B).
ASTM D 4024 Specification for Reinforced Thermosetting Resin M-621
(RTR) Flanges.
ASTM D 412 Test Method for Rubber Properties in Tension. M-CR-710
ASTM D 4928-89 (corresponds to IP 386/90) I-CR-100
ASTM D 4928-89 (corresponds to IP 386/90) I-SR-100
ASTM D 638 Test Method for Tensile Properties of Plastics. M-CR-710
ASTM D 695 Test Method for Compressive Properties of Rigid M-CR-710
Plastics.
ASTM D 746 Test Method for Brittleness Temperature of Plastics M-CR-710
and Elastomer by Impact.
ASTM D 790 Test method for Flexural Properties of Unreinforced M-CR-710
and Reinforced Plastics and Electrical Insulating
Materials.
ASTM D 792 Test Methods for Specific Gravity and Density of M-CR-710
Plastics by Displacement.
ASTM D 823 Method of producing films of uniform thickness of M-501
paint, varnish, lacquer and related products on test
ARJ/NOR/NORref/doc 7 28/07/00
panels.
ASTM E 140-88 Hardness conversion tables for metals D-SR-005
ASTM E 18 Test methods for Rockwell hardness and Rockwell D-SR-005
superficial hardness of metallic materials.
ASTM E 213 Standard practice for ultrasonic inspection of metal M-CR-702
pipe and tubing.
ASTM E 562 Practice for Determining Volume Fraction by M-601
Systematic Manual Point Count.
ASTM E 709 Standard guide for magnetic particle examination. M-CR-702
ASTM E 94 Guide for radiographic testing D-SR-005
ASTM F 467/468
ASTM G 48 Standard Test Method for Pitting and Crevice M-601
Corrosion Resistance of Stainless Steel and Related
Alloys by the use of Ferric Chloride Solution.
ASTM G 48 Pitting and Crevice Corrosion Resistance of Stainless U-CR-006
Steels and Related Alloys by the Use of Ferric Chloride
Solution
ASTM G 53 Recommended practice for operating light - and water - M-501
exposure apparatus (fluorescent UV - condensation
type) for exposure of non-metallic materials.
ASTM G 8 Test method for cathodic disbanding of pipeline M-501
coatings.
AWS D1.1 Structural Welding Code - Steel. M-503
BS British Standard T-CR-001
BS 1806 Standard Inch Size of O-rings M-CR-710
BS 2654 Specification for manufacture of vertical steel welded R-001
non-refrigerated storage tanks with butt-welded shells
for the petroleum industry.
BS 2915 Bursting Discs and Bursting Disc Devices I-001
BS 3799 L-CR-001
BS 5422 Method for specifying Thermal insulating materials on H-CR-001
pipes, ductwork and equipment.
BS 5422 Method for specifying Thermal insulating materials on H-CR-002
pipes.
BS 5480 Specification for Glass Fibre Reinforced (GRP) pipes, M-621
joints and fittings for use for water supply and
sewerage.
BS 5493 Code of practice for protection of iron and steel M-501
structures against corrosion.
BS 5500 Unfired Fusion Welded Pressure Vessel Code. P-001
BS 5500 Unfired Fusion Welded Pressure Vessel Code. R-001
BS 5500 Unfired Fusion Welded Pressure Vessels. R-100
BS 5970 Code of practice for Thermal insulation of pipework H-CR-001
and equipment.
BS 5970 Code of practice for Thermal insulation of pipework H-CR-002
and equipment.
BS 6360 Specification for conductors in insulated cables and U-CR-005
cords.
BS 7448, Part 1 Fracture mechanics toughness tests. M-101
BS 8118 Part 2, Structural use of aluminium. M-102
BS 8118 Structural use of aluminium M-121
BS MA 18 Salt Water Piping in Ships. M-001
BS MA 18 Salt water piping systems in ships P-001
BSI BS 8100 Lattice towers and masts, Part 1. N-001
BSI BS 8118 Structural use of Aluminium, Part 1, Code practice for N-001
the design of Al-structures.
BSI PD6493 Guidance on some methods for the derivation of M-101
ARJ/NOR/NORref/doc 8 28/07/00
acceptance levels for defects in fusion welded joints.
CCITT International Telegraph and Telephone Consultative T-CR-001
Committee
CEN/TC 234 - WG 5 N40 “Functional requirements for gas metering systems for I-SR-104
Draft natural gas”
CEN/TC 234-WG 5 N40 “Functional requirements for gas metering systems for I-CR-100
Draft natural gas”
CENELEC European Committee for Electrotechnical T-CR-001
Standardisation
CIBS Commissioning codes, series A, air distribution. H-CR-001
DBE regulations Forskrifter om kjelanlegg med veiledninger R-001
(Regulations for boiler plants and guidelines).
DIN Deutsche Industri Normen T-CR-001
DIN 1055 Lasted in silozellen R-001
DIN 16966 Glass fibre reinforced polyester resin (UP-GF) pipe M-621
fittings and joint assemblies.
DIN 17455 General purpose welded circular stainless steel tubes, H-CR-002
Technical delivery conditions.
DIN 1942 Abnahmeversuche an Dampferzeugern. R-001
DIN 19530 Steel pipes and fittings with slip joint for sewage H-CR-002
pipelines, dimensions.
DIN 24154 Ventilation equipment, flanges, class 1. H-CR-001
DIN 24193 Ducting for ventilation equipment, flanges, series 2, H-CR-001
flat and angle flanges.
DIN 2463 Welded austenittic stainless steel tubes; dimensions and H-CR-002
DIN 2505 Flanged joint calculation L-CR-004
DIN 32521 Acceptance test and quality control for thermal M-501
spraying equipment.
DIN 4131 Antennentragwerke aus stahl N-001
DIN 4133 Schorsteine aus stahl. N-001
DIN 53453 Testing of Plastics, Impact Flexural Test. M-CR-710
DIN 8566 Zusätze für das termische Sprizen. M-501
DIN VDE 0848, Part 4 Safety at electro magnetic fields. S-002
DNMI Report 18/97 KLIMA. Recommended format N-002
(NORSOK) for the delivery of metocean data.
DNV Classification note 30.4, Foundation G-CR-001
DNV Guidelines for flexible pipes L-002
DNV Guidelines for Flexible Pipes, 1987. M-001
DNV Rules for Classification of fixed offshore installations. N-001
DNV Rules for Classification of mobile offshore units. N-001
DNV Rules for Classification of ships. N-001
DNV Classification note no. 30.1 “Buckling strength N-001
analysis.
DNV Classification note no. 30.2 “Fatigue strength analysis N-001
for mobile offshore units.
DNV Classification note no. 30.5 “Environmental conditions N-001
and environmental loads.
DNV Veritas Marine Operations, Standard for insurance N-001
warranty surveys in marine operations.
DNV Rules for Classification of Steel Ships. R-001
DnV Rules for submarine pipelines, 1981 U-CR-001
DnV Det norske Veritas Certification Note 2.7-1: Offshore U-CR-005
Freight Containers Design and Certification
DNV CN 2.7.1 Lifting certificate requirements D-CR-003
DNV CN 2.7.1 Offshore freight containers. Design and certification D-SR-007
DNV CN 2.7.1 Offshore Freight Containers - Design and Certification R-003
ARJ/NOR/NORref/doc 9 28/07/00
DNV CN 2.7.1 Offshore Freight Containers - Design and Certification R-CR-002
DNV CN 2.7.1 Lifting certificate requirements U-CR-003
DNV CN 2.7.2 Offshore Service Containers - Design and Certification R-003
DNV CN 2.7.2 Offshore Service Containers - Design and Certification R-CR-002
DNV Lifting Appliances DNV Rules for Certification of Lifting Appliances, R-CR-002
1989.
DNV Pipeline Rules Rules for Submarine Pipeline Systems, 1996 Y-001
(exclucing section 2, Certification)
DNV RP B201 metallic Materials in Drilling, Production and Process M-001
Systems.
DNV RP B401 Cathodic Protection Design. M-503
DNV RP D404 Unstable fracture. M-101
DnV-1980 Technical notes for fixed offshore installations, U-CR-005
Volume B.
E&P Forum Guidelines for the Development and Application of D-010
Health, Safety and Environmental Management
Systems
EFC Doc. No. O&G-93-2 Guidance on materials requirements for corrosion M-CR-703
resistant alloys exposed to H2S in oil and gas
production
EFC Publ. No. 16 Guidelines on material Requirements for Carbon and M-001
Low Alloy Steels for H2S Environments in Oil and Gas
Production.
EFC Publ. No. 16A Working party report on Guidelines on material M-CR-703
requirements for carbon and low-alloy steels for H2S -
Containing environments in oil and gas production.
EFC Publ. No. 17 Corrosion Resistant Alloys for Oil and Gas Production. M-001
Guidance on General Requirements and Test Methods
for H2S Service.
Eltilsynet Forskrift om elektrisk utstyr (Regulation on electrical Z-010
equipment).
Eltilsynet Retningslinjer for jording i maritime anlegg Z-010
(Guidelines for earthing in maritime installations).
EN 10002 Metallic materials. Tensile testing. Part 1: Method of M-503
test (at ambient temperature).
EN 10025 Hot rolled products of non - alloy structural steels: M-101
Technical delivery conditions.
EN 10025 M-120
EN 10204 Metallic products - Types of inspection documents. M-101
EN 10204 Metallic products - Types of inspection documents. M-102
EN 10204 Metallic products - Types of inspection documents. M-503
EN 10204 Metallic products - Types of inspection documents. M-601
EN 10204 Metallic Products-Types of Inspection Documents M-701
EN 10204 Metallic products - Types of inspection documents. M-CR-702
EN 10204 Material documentation R-CR-002
EN 10210 M-120
EN 10219 M-120
EN 1050 Safety of Machinery - Risk Assessment. R-003
EN 1050 Safety of machinery - Risk assessment R-CR-002
EN 1050 Safety of machinery - Risk assessment. S-002
EN 1070 Safety of machinery - Terminology R-CR-002
EN 26847 Covered electrodes for manual metal are welding. M-101
Deposition of a weld pad for chemical analysis.
EN 287 Approval testing of welders - Fusion welding. M-101
EN 287 Approval testing of welders - Fusion welding - Part 1. M-503
EN 287 Approval testing of welders - Fusion welding. M-601
ARJ/NOR/NORref/doc 10 28/07/00
EN 287 Approval testing of welders. M-CR-702
EN 287-2 Approval testing of welders - Fusion welding. M-102
EN 288 Specification and qualification of welding procedures H-CR-001
for metallic materials.
EN 288 Specification and qualification of welding procedures M-101
for metallic materials.
EN 288 Specification and approval of welding procedures for M-503
metallic materials - Part 1, 2, 3.
EN 288 Specification and approval of welding procedures for M-601
metallic materials.
EN 288 Specification and qualification of welding procedures M-650
for metallic materials
EN 288 Specification and Approval of Welding Procedures for M-701
Metallic Materials
EN 288 Specification and qualification of welding procedures M-CR-702
for metallic materials.
EN 288-4 Specification and qualification of welding procedures M-102
for metallic materials.
EN 292 Safety of machinery - Basic concepts, general R-CR-002
principles of design - Part 1: Basic terminology,
methodology. Part 2: Technical principles and
specifications.
EN 292 Safety of machinery - Basic concepts, general S-002
principles for design, Part 1 and 2.
EN 294 Safety of machinery - Safety distances to prevent S-002
danger zones to be reached by upper limbs.
EN 349 Safety of machinery - Minimum gaps to avoid crushing S-002
of parts of the human body.
EN 418 Safety of machinery - Emergency stop equipment - R-CR-002
functional aspects - principle of design.
EN 444 NDT - General principles for radiographic examination M-101
of metallic materials by X-rays and gamma rays.
EN 444 NDT - General principles for radiographic examination M-102
of metallic materials by X-rays and gamma rays.
EN 462 NDT - Image quality of radiographs. M-101
EN 462 NDT - Image quality of radiographs. M-102
EN 473 Qualification and certification of NDT personnel - M-101
General principles.
EN 473 Qualification and certification of NDT personnel - M-102
General principles.
EN 473 Qualification and certification of personnel for non M-601
destructive examination.
EN 473 Qualification and certification and certification and N-005
certification of NDT personnel - General principles
EN 485 Aluminium and aluminium alloys - Sheet, strip and N-001
plate.
EN 50081-2 Electromagnetic compatibility generic emission I-001
standard
EN 50081-2 Electromagnetic compatibility generic immunity I-001
standard
EN 50081-2 Electromagnetic compability generic emission I-CR-002
standard.
EN 50081-2 Electromagnetic compatibility generic emission T-CR-001
standard
EN 50081-2 Electromagnetic compatibility generic emission Z-010
standard.
EN 50082-2 Electromagnetic compability generic immunity I-CR-002
ARJ/NOR/NORref/doc 11 28/07/00
standard.
EN 50082-2 Electromagnetic compatibility generic immunity T-CR-001
standard
EN 50082-2 Electromagnetic compatibility generic immunity Z-010
standard.
EN 50091-1 Uninterruptable power systems (UPS), Part 1: General E-001
and safety requirements.
EN 547 Safety of machinery - Human body dimensions. S-002
EN 547 part 1 Principles for determining the dimensions required for S-002
openings for whole body access into machinery.
EN 547 part 2 Principles for determining the dimensions required for S-002
access openings.
EN 547 part 3 Anthropometric data. S-002
EN 563 Safety of machinery - Temperature of touchable S-002
surfaces - Ergonomics data to establish temperature
limit values for hot surfaces.
EN 60534-2 - ½ / IEC 534-2 Industrial process control valves. Part 2, section 1 and I-001
2.
EN 60584-1/2 / IEC 584-1 Thermocouples I-001
EN 60751 / IEC 751 Resistance Temperature Detectors (RTD) I-001
EN 614 Safety of machinery - Ergonomic design principles. S-002
EN 614 part 1 Terminology and general principles. S-002
EN 626 Safety of machinery - Reduction of risks to health from S-002
hazardous substances emitted by machinery.
EN 626 part 2 Manual handling of objects associated to machinery. S-002
EN 626 part 3 Recommended forcelimits for machinery operations. S-002
EN 719 Welding co-ordination - Tasks and responsibilities. M-101
EN 719 Welding co-ordination - Tasks and responsibilities. M-102
EN 729 Quality requirements for welding - Fusion welding of M-101
metallic materials.
EN 729 Quality requirements for welding - Fusion welding of M-102
metallic materials.
EN 729 Quality requirements for welding - Fusion welding of M-601
metallic materials.
EN 755 Aluminium and aluminium alloys - Extruded rod/bar, N-001
tube and profiles.
EN 818 Short Link Chain for Lifting Purposes - Safety - Part 1: R-CR-002
General Conditions of Acceptance. Part 2: Medium
Tolerance Chain Slings - Grade 8.
EN 818-1 Short Link Chain for Lifting Purposes - Safety Part 1: R-003
General Conditions of Acceptance
EN 818-2 Short Link Chain For Lifting Purposes - Safety Part 2: R-003
Medium Tolerance Chain for Chain Sling - Grade 8
EN 818-8 Short Link Chain for Lifting Purposes - Safety - Part 1; R-CR-002
General Conditions of Acceptance.
EN 875 Welding - Welded joints in metallic materials - M-101
Specimen location and notch orientation for impact
tests.
EN 970 Welding - Visual examination of fusion welded joint. M-101
EN 970 Non-destructive examination of fusion welds - Visual M-601
examination.
EN 983 Safety of machinery - Safety requirements for fluid R-CR-002
power systems and components - Pneumatics.
ETSI European Telecommunication Standard Institute T-CR-001
EU 89/336 Electromagnetic compatibility (EMC) of 1989-05-23. E-002
Eurovent 2/2 Air leakage rate in sheet metal air distribution systems. H-CR-001
Eurovent 2/3 Sheet metal air ducts - Standard for dimensions. H-CR-001
ARJ/NOR/NORref/doc 12 28/07/00
Eurovent 2/4 Sheet metal air ducts - Standard for fittings. H-CR-001
Eurovent 4/5 Method of testing air filters used in general ventilation. H-CR-001
FEAM Regulation for Electrical Installations, Maritime Z-006
Installations.
FEAM 1990 Forskrifter for elektriske anlegg, maritime H-CR-001
installasjoner.
FEM, SEC. 1 Heavy Lifting and Handling Equipment. R-CR-002
FEM, SEC. 9 Series Lifting Equipment. R-CR-002
FF-T-79-B Turnbuckles R-003
HVACA DW/142 Specification for sheet metal ductwork. H-CR-001
Hydraulic Institute Standards for centrifugal, rotary & reciprocating R-100
pumps.
ICE 704 Optical Fibre Cables Part 1: Generic specification U-CR-006
ICS/ISF Guidelines on the Application of the IMO International J-003
Safety Management Code
IEC Publication No. 45. R-001
IEC International Electrotechnical Commission T-CR-001
IEC 1136-1 Semiconductor power converters, Part 1: Adjustable E-002
speed electric drive systems, general requirements.
IEC 1346-1 Industrial systems, installations and equipment and Z-DP-002
industrial products Structuring principles and reference
designations Part 1: Basic rules
IEC 146 Semiconductor converters, Part 1 through 4 as relevant. E-002
IEC 146-4 Semiconductor convertors, Part 4: Method of E-001
specifying the performance and test requirements of
uninterruptible power systems.
IEC 1800-2 Adjustable speed electrical power drive systems, Part E-002
2: Rating specifications for low voltage adjustable
frequency AC power drive systems.
IEC 1800-3 Adjustable speed electrical power drive systems, Part E-002
3: EMC product standard including specific test
methods.
IEC 228 Conductors of insulated Cables U-CR-006
IEC 298 AC metal-enclosed switchgear and controlgear for E-001
rated voltages above 1kV and up to and including
52kV. (1990-12)
IEC 34 Rotating electrical machines. Parts 1 through 18 as E-002
relevant.
IEC 34-5 Rotating electrical machines, Part 5: Classification of E-001
degree of protection provided by enclosures of rotating
electrical machines (IP code).
IEC 439-1 Low-voltage switchgear and controlgear assemblies - E-001
Part 1: Type-tested and partially type-tested
assemblies.
IEC 502 Extruded solid dielectric insulated power cables for U-CR-006
rated voltages from 1 kV to 30 kV
IEC 529 Classification of degrees of Protection provided by U-CR-005
enclosures.
IEC 529 Degrees of protection provided by enclosures (IP code) Z-010
IEC 551 Determination of transformer and reactor sound levels. E-002
IEC 726 Dry type power transformers. E-002
IEC 751 Industrial Platinum Resistance Thermometer sensors I-CR-100
IEC 751 Industrial Platinum Resistance Thermometer sensors I-SR-105
IEC 76 Power transformers, Part 1 through 5 as relevant. E-002
IEC 76-1 Power transformers, Part 1: General E-001
IEC 79-10 Area Classification. S-DP-001
IEC 79-13 Electrical apparatus for explosive gasatmospheres. Part H-CR-001
ARJ/NOR/NORref/doc 13 28/07/00
13: Construction and use of rooms or buildings
protected by pressurisation.
IEC 79-13 Construction and use of rooms or buildings protected S-DP-001
by pressurisation.
IEC 811 Common test method for insulating and sheeting U-CR-006
materials or electric cables
IEC 870 International Electrotechnical Commission: Telecontrol U-CR-005
equipment and systems. Part 5: Transmission protocols
IEC 885 Electrical test methods for electrical cables U-CR-006
IEC 92.101 Electrical Installation in ships. Definitions and General U-CR-005
requirements.
IEC 947-4-1 Low voltage switchgear and control gear, Part 4: E-001
Contactors and motor-starters. Section one -
Electromechanical contactors and motor-starters.
IFEA Guidelines for the documentation of selectivity E-001
(discrimination) in a.c. systems.
IFEA Veiledning for varmekabelanlegg i industri og E-001
offshore.
IFEA Veiledning for varmekabelanlegg i industri og Z-010
offshore. Guidelines for heat tracing installation in
industry and offshore. (Norwegian text only)
IIW Radiographic Atlas M-102
ILO 152 Convention concerning Occupational Safety R-003
IMCA Guidance Note No IMCA D 010: Diving Operations J-003
from Vessels Operating in Dynamically Positioned
Mode.
IMO Code for the construction and equipment of Mobil N-001
offshore drilling units (MODU CODE)
IMO A.469 (XII) Guidelines for the Design and Construction of Offshore J-003
Supply Vessels.
IMO A.481 (XII) Principles of Safe Manning. J-003
IMO A.538 (13) Maritime Safe Training of Personnel on Mobile J-003
Offshore Units.
IMO A.741 (18) International Safety Management (ISM) Code. J-003
IMO MSC/Circ. 645 Guidelines for Vessels with Dynamic Positioning J-003
Systems
IMO Res. A.653 Recommendation on improved fire test procedures for S-DP-001
surface flammability of bulkhead, ceiling and deck
finish materials.
INSTA 121 Acoustics - Determination of Sound Power Level of R-001
Noise Sources Using Sound Intensity Measurement,
Scanning Method for Use in Situ.
IP 386/90 Water in crude oil by Coulometric Karl Fischer I-CR-100
titration.
IP 386/90: Water in crude oil by Coulometric Karl Fischer I-SR-100
titration.
IP Part 15 Institute of Petroleum: Model code of safe practice, S-DP-001
Part 15, Area classification code for petroleum
installations
IP PMM Part VII Continuous Density Measurement I-CR-100
IP PMM Part VII Continuous Density Measurement I-SR-105
IP PMP No. 2 Guidelines for users of Petroleum Measurement Tables I-CR-100
IP PMP No. 2 Guidelines for users of Petroleum Measurement Tables I-SR-105
ISA 75.01 Flow equations for sizing control valves. I-001
ISO International Standardisation organisation T-CR-001
ISO 10 423 (API spec. 6A) D-SR-004
ISO 1000 SI Units and recommendation for the use of their I-001
ARJ/NOR/NORref/doc 14 28/07/00
multiples and of certain other units.
ISO 1000 SI units and recommendations for use of their multiples I-CR-100
and of certain other units.
ISO 1000 SI units and recommendations for use of their multiples I-SR-105
and of certain other units.
ISO 10042 Arc welded joints in aluminium and its wedable alloy M-102
(EN 30042)
ISO 10245-1 Cranes - Limiting and Indicating Devices - General R-003
ISO 10303 Industrial automation systems and integration - Product Z-CR-003
data representation and exchange (STEP).
ISO 10303 Part 1 Overview and functional principles. Z-CR-003
ISO 10303 Part 11 Description methods: EXPRESS reference manual. Z-CR-003
ISO 10303 Part 21 Implementation methods: Clear text encoding of the Z-CR-003
exchange structure.
ISO 10400 Formulae and calculation for casing, tubing, drill pipe D-SR-005
and line pipe properties
ISO 10418 Recommended practice for analysis, design, I-CR-002
installation and testing of basic surface safety systems
on offshore production platforms.
ISO 10418 Analysis, design, installation and testing of basic P-100
safety. Systems for offshore production platforms
(mainly based on API RP 14C)
ISO 10418 Analysis, design, installation and testing of basic S-DP-001
surface safety systems for offshore production
platforms (replaces API RP14 C).
ISO 10420 Flexible pipe systems for subsea and marine riser L-002
applications (based on API RP 17B)
ISO 10423 Specification for Wellhead and Christmas Tree D-CR-003
Equipment API
ISO 10423 Specification for valves, wellhead and Christmas tree D-SR-005
equipment
ISO 10423 Valves, wellhead and Christmas tree equipment D-SR-006
ISO 10423 Valves, Wellhead and Christmas Tree Equipment D-SR-008
ISO 10423 (API 6A) D-SR-022
ISO 10423 Specification for Wellhead and X-mas Tree Equipment U-CR-001
(replaces API 6A)
ISO 10423 Specification for Wellhead and Christmas Tree U-CR-003
Equipment (replace API 6A)
ISO 10437 Special Purpose Steam Turbines for Refinery Services. R-001
ISO 1133 Plastics - Determination of Melt Flow Rate of M-CR-710
Thermoplastics.
ISO 11960 Steel pipes for use as casing or tubing for wells. M-001
(Replace API 5 CT)
ISO 11960 - Specification for Casing and Tubing. (Replaced API M-701
Spec. 5CT).
ISO 11960 Material for petroleum and natural gas industries steel M-CR-703
pipe for use as casing or tubing for wells
ISO 128-20 Technical drawings - Liens Z-005
ISO 1363 Package Gas Turbines (in development). R-001
ISO 13702 Requirements and guidelines for the prevention, S-DP-001
control and mitigation of fires and explosions. Until the
Draft International Standard (DIS) becomes available
(April 1996) the Committee Draft (CD) applies.
ISO 13819-1 Offshore structures Part 1: General requirements. N-001
ISO 13819-1 Offshore structures part 1: General requirements N-005
ISO 13879 Petroleum and Natural Gas Industries - Writing and A-001
Content of a Functional Specification. (Presently at
ARJ/NOR/NORref/doc 15 28/07/00
DIS stage)
ISO 13880 Petroleum and Natural Gas Industries - Writing and A-001
Content of a Functional Specification. (Presently at
DIS stage)
ISO 140/4 Measurement of sound insulation in building elements. C-002
Field measurements of airborne sound insulation
between rooms.
ISO 140-3 Acoustics - measurements of Sound Insulation in C-002
Building and Building Elements - Part 3: Laboratory
Measurements of Airborne Sound Insulation of
Building Elements.
ISO 1402 Rubber and plastics hoses and hose assemblies - U-CR-006
Hydrostatic testing
ISO 1432 Rubber vulcanised - low temperature stiffening M-CR-710
(Gehman test)
ISO 1461 Metallic coatings - Hot-dip galvanized coating on M-501
fabricated ferrous products . Requirements.
ISO 1461 Metallic coatings - Hot-dip galvanized coating on M-503
fabricated ferrous products - Requirements.
ISO 1461 Hot dip galvanised coatings on fabricated ferrous R-CR-002
products.
ISO 1513 Paints and varnishes - Examination and preparation M-501
samples for testing.
ISO 1514 Paints and varnishes - Standard panels for testing. M-501
ISO 1680 Test code for the measurement of airborne noise E-002
emitted by rotating electrical machinery, Part 1:
Engineering method for free field conditions over a
reflecting plane.
ISO 1817 Vulcanised rubbers - Resistance to liquids - methods of M-CR-710
tests
ISO 1940 Mechanical Vibration - Balance Quality Requirements R-001
of Rigid Rotors.
ISO 2408 Steel Wire Ropes for general Purposes. R-003
ISO 2408 Steel Wire Ropes for General Purposes - R-CR-002
Characteristics.
ISO 262 General Purpose Metric Screw Threads. R-001
ISO 263/1 Evaluation of human exposure to whole body vibration S-002
- Part 1: General requirements.
ISO 2811 Paints and varnishes - Determination of density. M-501
ISO 2812 Paints and varnishes - Determination of resistance to M-501
liquids.
ISO 2814 Paints and varnishes - Comparison of contrast ratio M-501
(hiding power) of paint of the same type and colour.
ISO 2954 Mechanical Vibration of Rotating and Reciprocating R-001
Machines.
ISO 3046 Reciprocating Internal Combustion Engines - R-001
Performance.
ISO 3170 Petroleum Liquids - Manual Sampling I-CR-100
ISO 3170 Petroleum Liquids - Manual Sampling I-SR-100
ISO 3171 Petroleum Liquids - Automatic pipeline sampling. I-CR-100
ISO 3171 Petroleum Liquids - Automatic pipeline sampling. I-SR-100
ISO 3251 Paints and varnishes - Determination of non-volatile M-501
matters of paints, vanishes and binders for pait and
vanishes.
ISO 3511 Process measurement control functions and U-CR-005
instrumentation - Symbolic representation
ISO 3511 Process Measurement Control Functions and Z-001
ARJ/NOR/NORref/doc 16 28/07/00
Instrumentation - Symbolic representation (Part I, II,
III and IV).
ISO 3511 Process measurement control functions and Z-DP-002
instrumentation - Symbolic representation (NS 1438)
ISO 3511-1 Part 1: Basic requirements Z-DP-002
ISO 3511-2 Part 2: Extension of basic requirements Z-DP-002
ISO 3511-3 Part 3: Detailed symbols for instrument interconnection Z-DP-002
diagrams
ISO 354 Acoustics - Measurement of Sound Absorption in a C-002
Reverberation Room.
ISO 3690 Welding - Determination of hydrogen indeposited weld M-101
metal arising from the use of covered electrodes for
welding mild and low alloy steels.
ISO 3690 Welding - Determination of hydrogen in deposited M-601
weld metal arising from the use of covered electrodes
for welding mild and low alloy steels.
ISO 3945 Mechanical Vibration of Large Rotating Machines. R-001
ISO 3949 Plastcs hoses and hose assemblies - Thermoplastics, U-CR-006
textile-reinforced, hydraulic type
ISO 4080 Rubber and plastics hoses - Determination of gas U-CR-006
permanence
ISO 4200
ISO 4302 Cranes - Wind Load Assessment R-003
ISO 4309 Wire Ropes - Code of Practice for Examination and R-003
Discard
ISO 4310 Cranes - Test Code and Procedures R-003
ISO 4406 Hydraulic fluid power-fluids-method for coding level L-CR-004
of contamination by solid particles
ISO 4406 Hydraulic fluid power Fluids, Method for coding of R-001
contamination by solid particles.
ISO 4406 Hydraulic Fluid Power - Fluids - Method for coding U-CR-006
level of contamination by solid particles
ISO 4406/NAS 1638 Evaluation of hydraulic fluid contamination U-CR-005
ISO 4624 Paints and varnishes - Pull-off test for adhesion. M-501
ISO 4628 Paints and varnishes - Evaluation of degradation of M-501
paint coatings - Designation of intensity, quantity and
size of common type of defects.
ISO 4671 Rubber and plastics hose and hose assemblies - U-CR-006
Methods of measurement of dimensions
ISO 4901 Reinforced plastics based on unsaturated polyester M-621
resins-Determination of residual styrene monomer
content.
ISO 5024 Measurement - Standard reference conditions I-CR-100
ISO 5024 Measurement - Standard reference conditions I-SR-105
ISO 5167 Measurement of fluid flow by means of pressure I-001
differential devices - Part 1.
ISO 5167 “Measurement of fluid flow by means of orifice plates, I-CR-100
nozzles and venturi tubes inserted in circular cross-
section conduits running full”
ISO 5167 Measurement of fluid flow by means of orifice plates, I-SR-102
nozzles and venture tubes inserted in circular cross
section conduits running full.
ISO 5167 Measurement of fluid flow L-002
ISO 527 Plastics, determination of tensile properties U-CR-006
ISO 5349 Guidelines for the measurement and the assessment of S-002
human exposure to hand-transmitted vibration.
ISO 5660 Fire test - Reaction to fire - Part 1: Rate of heat release C-002
ARJ/NOR/NORref/doc 17 28/07/00
from building products (Cone calorimeter method)
ISO 5660 Fire tests - Reaction to fire - Rate of heat release from S-DP-001
building products.
ISO 5730 Stationary shell boilers of welded construction. R-001
ISO 5817 (=EN 25817) Arc welded joints in steel - Guidance on quality levels M-101
for imperfections.
ISO 6270 Paints and varnishes - Determination of resistance to M-501
humidity (continuous condensation).
ISO 6551 Petroleum Liquids and Gases - Fidelity and Security of I-CR-100
Dynamic Measurement - Cabled Transmissions of
Electric and / or Electric Pulsed Data.
ISO 6551 Petroleum Liquids and Gases - Fidelity and Security of I-SR-102
Dynamic Measurement - Calibrated Transmissions of
Electric and / or Electric Pulsed Data.
ISO 6551 Petroleum liquids and gases - Fidelity and security of I-SR-105
dynamic, measurement - Cabled transmittion of electric
and / or electronic pulsed data.
ISO 6568 Natural gas - Simple analysis by gas chromatography I-SR-106
ISO 6976 Natural gas - Calculation of calorific value - density I-SR-106
and relative density
ISO 6978: “Calculation of heating value and reference density”. I-CR-100
ISO 6978: “Calculation of heating value and reference density”. I-SR-104
ISO 717 Rating of Sound Insulation in Buildings and of C-002
Building Elements.
ISO 717/1 Acoustic rating of sound insulation in buildings and of S-002
building elements.
ISO 7235 Acoustics measurement procedures for ducted silencers H-CR-001
- insertion loss, flow noise and for total pressure loss.
ISO 7253 Paints and varnishes - Determination of resistance to M-501
neutral salt spray.
ISO 7278 Part 3 Liquid hydrocarbons - Dynamic measurement - I-CR-100
Proving systems for volumetric meters”
ISO 7278 Part 3 Liquid hydrocarbons - Dynamic measurement - I-SR-105
Proving systems for volumetric meters”
ISO 7531 Wire Rope Slings for general Purposes - R-003
Characteristics and Specifications.
ISO 7531 Wire Rope Slings for General purposes - R-CR-002
Characteristics and Specification.
ISO 7751 Rubber and plastics hose assemblies - Ratios of proof U-CR-006
and burst pressure to design working pressure
ISO 7752-1 Lifting Appliances - Controls - Layout - Characteristics R-003
- General
ISO 7752-4 Cranes - Controls - Layout and Characteristics - Part 4: R-003
Jib Cranes.
ISO 7752-4 Cranes - Controls - Layout and characteristics - Part 4 R-CR-002
jib cranes.
ISO 8308 Rubber and plastics hoses and tubing - Determination U-CR-006
of transmission of liquids through hose and tubing
walls
ISO 8501 Preparations of steel substrates before application of M-503
paints and related products - Visual assessment of
surface cleanliness.
ISO 8501-1 Preparation of steel substrates before application of M-501
paints and related products - Visual assessment of
surface cleanliness.
ISO 8502-3 Preparation of steel substrates before application of M-501
paints and related products - Test for the assessment of
ARJ/NOR/NORref/doc 18 28/07/00
surface cleanliness - Assessment of dust on steel
surface prepared for painting, pressure sensitive tape
method.
ISO 8502-6 Preparation of steel substrates before application of M-501
paints and related products - Test for the assessment of
surface cleanliness - Sampling of soluble impurities on
surfaces to be painted - The Bresle method.
ISO 8503 Preparation of steel substrates before application of M-501
paints and related products - Surface roughness
characteristics of blast cleaned substrates.
ISO 8504-2 Preparation of steel substrates before application of M-501
paints and related products - Surface preparation
methods - Abrasive blast-cleaning.
ISO 8566-1 Cranes - Cabins - Part1: General R-003
ISO 8566-5 Cranes Cabins - Part 5: Overhead Travelling Cranes R-003
ISO 8601 Data elements and interchange formats - Information Z-CR-003
interchange-Representation of dates and times
- Technical corrigendum 1: 1991 to ISO 8601: 1988.
ISO 8601 Data elements and interchange formats - Information Z-DP-002
interchange - Representation of dates and times
ISO 868 Determination of Indentation Hardness by Means of a M-CR-710
Durometer (Shore hardness).
ISO 8792 Wire Rope Sling - Safety Criteria and Inspection R-003
Procedures for Use.
ISO 8793 Steel Wire Ropes - Ferrule secured Eye Termination’s. R-003
ISO 8859-1 Information processing - 8-bit single-byte coded Z-CR-003
graphic character set, Part 1: Latin alphabet No. 1
(1987)
ISO 8879 Information processing - Text and office systems - Z-CR-003
Standard generalised mark-up language (SGML)
(1986).
ISO 898 Mechanical properties of fasteners. M-001
ISO 9000 International Standard: Quality management and J-003
Quality Assurance Standards.
ISO 9000 series standards Z-CR-007
ISO 9095 Steel tubes - Continuous character marking and colour L-CR-004
coding for material identification
ISO 9529-1 Information processing systems (1992). Data Z-CR-003
interchange on 90mm (3.5in) flexible disk cartridge
using modified frequency modulation recordings at
15916 ft/rad, and 80 tracks on each side: Part 1:
Dimensional, physical and magnetic characteristics (=
EN 29529-1:1991) Part 2: Track format (= EN 29529-
2: 1991).
ISO 9614 - 2 Acoustics - Determination of Sound Power Level of R-001
Noise Sources Using Sound Intensity, Part 2:
Measurement by Scanning.
ISO 9660 Information processing - Volume and file structure of Z-CR-003
CD-ROM for information interchange (= EN 29660)
(1989).
ISO 9926-1 Training of Drivers. Part 1 - General R-003
ISO 9942-1 Cranes - Information Labels - General R-003
ISO D 34 Tear resistance, method A M-CR-710
ISO DIS 9951 Measurement of gas flow in closed conduits - Turbine I-CR-100
meters.
ISO DIS 9951 Measurement of gas flow in closed conduits - Turbine I-SR-102
meters
ARJ/NOR/NORref/doc 19 28/07/00
ISO DP 9857 Continuous Density Measurement I-CR-100
ISO DP 9857 Continuous Density Measurement I-SR-105
ISO Guide 25 Guidelines for Assessing the Technical M-701
Competence of Testing Laboratories
ISO R 812 Method of test for temperature limit of brittleness for M-CR-710
vulcanised rubber
ISO R538 Conventional signs to be used in schemes for the Z-001
installation of pipeline systems in ships.
ISO/CD 10715 “Natural Gas - Sampling Guidelines”. I-CR-100
ISO/CD 10715 “Natural Gas - Sampling Guidelines” I-SR-101
ISO/CD 14690 Petroleum and natural gas industries - Health, safety S-CR-002
and environmental management systems.
ISO/DIS 10715 Natural gas - Sampling guidelines I-SR-106
ISO/DIS 11961 Steel pipes for use as drill pipe. Specification. M-701
(Replaces API 5D).
ISO/DIS 12482-1 Condition Monitoring - General R-003
ISO/DIS 1461 Hot dip galvanised Coatings on Fabricated Ferrous R-003
Products.
ISO/DIS 6974 1/5 Natural gas - Determination of composition with I-SR-106
defined uncertainty by gas chromatography
ISO/DIS 99277-1 Cranes Inspection - General R-003
ISO/DTR 5658 - 1 Reaction to fire tests - spread of flame - Part 1: C-002
Guidance on Flame Spread
ISO/IEC 9075 Entry SQL levelling rules (SQL92). Z-CR-003
ISO/IEC Directives - Part 1 Procedures for the technical work. A-001
ISO/IEC Directives - Part 3 Rules for the structure and drafting of International A-001
Standards.
ISO/WD 13680 Material for petroleum and natural gas industries - M-CR-703
Corrosion resistant alloy seamless tubes for casing,
tubing and coupling stock - Part 1: Technical delivery
conditions.
ISO/WD 14224 Petroleum and natural gas industries - “Collection of O-CR-002
reliability and maintenance data for equipment”,
ISO/TC 67 4 N5 Rev. 4 (June 1995)
ITU International Telecommunication Union. T-CR-001
IWCF Well control training and certification standards. D-010
KRV A 984/82-02 Instructions for design and installation of piping made M-621
of glassfibre reinforced thermosetting resins, with and
without liner.
Luftfartsverket: Forskrift om kontinentalsokkelflyging - Ervervsmessig N-002
luftfart til og fra helikopterdekk på faste og flyttbare
innretninger til havs. Bestemmelser for sivil luftfart.
BSL D 5-1, Oslo.
MARPOL 73/78 International Convention for the Prevention of J-003
Pollution from Ships 1973, as modified by Protocol of
1978.
MIL-A-18001 disc and rod shaped M-503
MODU Code Code for the Construction and equipment of Mobile J-003
Offshore Drilling Units.
MSS SP 44 Steel Pipeline Flanges R-001
MSS-SP-44 L-CR-001
MSS-SP-75
MTI manual No. 3 Guideline Information on Newer Wrought Iron and M-001
Nickel-base Corrosion Resistant Alloys, Phase 1,
Corrosion Test methods. (Appendix B, Method MTI-
2).
NACE Sulphide Stress Cracking Resistant Metallic Materials M-601
ARJ/NOR/NORref/doc 20 28/07/00
for Oilfield
NACE MR-01-75 Sulphide stress cracking resistant metallic materials for D-SR-005
oil field equipment
NACE MR-01-75 Sulphide stress cracking resistant metallic materials for D-SR-007
oil field equipment
NACE MR-01-75 D-SR-021
NACE MR-01-75 L-CR-001
NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials M-001
for Oilfield Equipment.
NACE MR-01-75 Material Requirements. Sulphide Stress Cracking M-701
Resistant
Metallic Material for Oil Field Equipment
NACE MR-01-75 Sulphide stress cracking resistant metallic materials for M-CR-703
oilfield equipment
NACE MR-0175 Sulfide Stress Cracking Resistant Metallic Materials D-SR-008
for Oil Field Equipment
NACE MR-0175 for sour service D-SR-022
NACE MR0175 Equipment. M-601
NACE RP0188 Discontinuity (holiday) testing of protective coatings. M-501
NACE RP0387 Metallurgical and Inspection Requirements for Cast M-503
Sacrificial Anodes for Offshore Applications.
NACE RP-04-92 Metallurgical and Inspection Requirements for M-503
Offshore Pipeline Bracelet Anodes.
NACE TM-01-77 Laboratory testing of metals for resistance to sulphide M-CR-703
stress cracking in H2S environment
NAMUR Normenarbeitsgemeinschaft für Mess - und I-001
Regelungstechnik in der Chemischen Industrie
NAS 1638 Cleanliness requirements of parts used in hydraulic P-100
systems. National Aerospace Standard, 1964.
NAS 1638 National Aerospace Standard. Cleanliness required of R-001
parts used in hydraulic systems.
NEK 606 Cables for offshore installations Halogen-free, or mud E-001
resistant
NEK 606 Cables for offshore installations Halogen-free, or mud Z-010
resistant.
NEK 606 Cables for offshore installations. Halogen-free, or mud Z-DP-002
resistant
NEMA SM 23 Steam Turbines for mechanical drive service. R-001
NFPA 20 Centrifugal Fire Pumps. R-001
NFPA 20 Firewater Pumps. R-100
NFPA 72E 3-3 Temperature Classification I-001
NFPA 96 Standard for ventilation control and fire protection of H-CR-001
commercial cooking operations.
NMD Regulations for Mobile Offshore Units J-003
NMD The Norwegian Ship Control Legislation J-003
NMD Guidelines and Notes for Mobile Offshore Units J-003
NMD Regulations of 4 September 1987 No. 856 concerning N-001
construction of mobile offshore units (issued with
amendments 1997)
NMD Regulations of 4 September 1987 No. 857 concerning N-001
anchoring/positioning on mobile offshore units (issued
with amendments 1997)
NMD Regulations of 20 December 1991 No. 878 concerning N-001
stability, watertight subdivision and
watertight/weathertight closing means on mobile
offshore units
NMD Regulations of 20 December 1991 No. 879 concerning N-001
ARJ/NOR/NORref/doc 21 28/07/00
ballast systems on mobile offshore units
NMD Regulations of 10 February 1994 No. 123 for mobile N-001
offshore units with production plants and equipment
NMD Regulations of 1 April 1996 No. 320 concerning N-001
certificates of competency and qualification
requirements for the manning of mobile offshore units
NORSOK In particular I-CR-100 “Fiscal measurement systems” I-SR-102
NORSOK I-CR-100 I-SR-101
NORSOK C-001 Living quarters area. S-002
NORSOK C-002 Architectural components and equipment C-001
NORSOK C-002 Architectural components and equipment. S-002
NORSOK C-CR-001 Living quarters area I-CR-004
NORSOK D-005 Coiled tubing (presently D-SR-005) D-010
NORSOK D-006 Snubbing equipment (presently D-SR-006) D-010
NORSOK D-008 Wireline equipment (presently D-SR-008) D-010
NORSOK D-SR-001 Derrick/Mast and Hoisting Equipment D-DP-001
NORSOK D-SR-002 Rotary Equipment D-DP-001
NORSOK D-SR-003 Pipehandling System D-DP-001
NORSOK D-SR-004 Drillfloor and Substructure w/Equipment D-DP-001
NORSOK D-SR-011 Bulk System D-DP-001
NORSOK D-SR-012 Mud Mixing and Storage System D-DP-001
NORSOK D-SR-013 High Pressure Mud System D-DP-001
NORSOK D-SR-014 Mud Treatment System D-DP-001
NORSOK D-SR-015 Cementing System D-DP-001
NORSOK D-SR-021 Kill and Choke Manifold System D-DP-001
NORSOK D-SR-022 BOB, Diverter and Drilling Riser System D-DP-001
NORSOK E-001 Electrical systems. E-002
NORSOK E-CR-001 Electrical Systems R-CR-002
NORSOK G-CR-001 Soil investigation (next revision will be renumbered G- N-001
001)
NORSOK I-CR-002 Safety and automation systems (SAS) (will be E-001
renumbered I-002).
NORSOK I-CR-002 Safety and automation systems I-CR-004
NORSOK I-CR-002 Safety and automation systems. U-DP-001
NORSOK I-CR-004 Control centre (will be I-004) C-001
NORSOK I-CR-100 Fiscal measurement systems I-SR-106
NORSOK I-CR-100: Fiscal measurement systems I-SR-100
NORSOK I-SR-100 Automatic oil sampler I-CR-100
NORSOK I-SR-101 Automatic gas sampler I-CR-100
NORSOK I-SR-102 Fuel gas measurement I-CR-100
NORSOK I-SR-103 Flare gas measurement I-CR-100
NORSOK I-SR-104 Fiscal metering system for gas I-CR-100
NORSOK I-SR-105 Fiscal metering system for crude oil and condensate. I-CR-100
NORSOK J-003 Marine operations N-001
NORSOK J-CR-003 Marine Operations U-CR-001
NORSOK L-001 Piping and valves L-002
NORSOK L-002 Piping Design, Layout and Stress Analysis I-001
NORSOK L-003 Piping detail (presently L-CR-003) L-002
NORSOK L-CR-001 Piping and valves H-CR-002
NORSOK L-CR-001 Piping and valves L-CR-003
NORSOK L-CR-001 Piping and valves L-CR-004
NORSOK L-CR-001 Piping and Valves (will be renumbered L-001) M-001
NORSOK L-CR-001 Piping and valves M-601
NORSOK L-CR-001 Piping and valves (will be renumbered L-001) P-001
NORSOK L-CR-001 NORSOK standard - Piping and valves Z-DP-002
NORSOK L-CR-003 Piping Details (will be renumbered L-003) I-001
ARJ/NOR/NORref/doc 22 28/07/00
NORSOK L-CR-004 Piping fabrication, installation, flushing and testing H-CR-002
NORSOK M-001 Material selection M-101
NORSOK M-001 Material selection. M-102
NORSOK M-001 Material selection M-501
NORSOK M-001 Materials selection N-001
NORSOK M-001 Materials selection Y-001
NORSOK M-101 Structural Steel Fabrication M-001
NORSOK M-101 Structural steel fabrication N-001
NORSOK M-102 Structural aluminium fabrication N-001
NORSOK M-120 Material Data Sheets for Structural Steel M-001
NORSOK M-120 Material data sheets for structural steel M-101
NORSOK M-120 Material data sheets for structural steel N-001
NORSOK M-121 Aluminium Structural Materials M-001
NORSOK M-121 Aluminium structural material. M-102
NORSOK M-121 Aluminium structural materials N-001
NORSOK M-501 Surface Preparation and Protective Coating I-001
NORSOK M-501 Surface Preparation and Protective Coating M-001
NORSOK M-501 Surface Preparation and Protective Coating. M-503
NORSOK M-501 Surface preparation and protective coating N-001
NORSOK M-501 Surface Preparation and Protective Coating Z-010
NORSOK M-503 Cathodic Protection Design M-001
NORSOK M-503 Cathodic protection N-001
NORSOK M-503 Cathodic Protection Y-001
NORSOK M-505 Standard for Corrosion Monitoring Design (presently M-503
M-CR-505).
NORSOK M-506 CO2 Corrosion rate calculation model (will be issued M-001
shortly)
NORSOK M-601 Welding and Inspection of Piping M-001
NORSOK M-630 material Data Sheets for Piping M-001
NORSOK M-702 Drill string components (presently M-CR-702) D-010
NORSOK M-CR-101 Structural Steel Fabrication R-CR-002
NORSOK M-CR-120 Material data sheets for Structural steel R-CR-002
NORSOK M-CR-501 Surface Preparation and Protective Coating R-CR-002
NORSOK M-CR-501 Surface Preparation and Protective Coating. U-CR-007
NORSOK M-CR-501 Surface preparation and protective coating Z-DP-002
NORSOK M-CR-503 Cathodic Protection Design D-CR-003
NORSOK M-CR-503 Catodic Protection Design U-CR-007
NORSOK M-CR-505 Corrosion monitoring design (will be renumbered M- N-001
505)
Norsok M-CR-601 Welding and inspection of piping L-CR-004
NORSOK M-CR-621 GRP Piping Materials (will be renumbered M-621) M-001
NORSOK M-CR-630 Material Data Sheets for Piping M-621
NORSOK M-CR-630 Material Data Sheet R-CR-002
NORSOK M-CR-650 Qualification of Manufacturers of Special materials M-001
(will be m-650)
NORSOK M-CR-710 Qualification of Non-metallic Sealing Materials and M-001
Manufacturers (will be renumbered M-710)
NORSOK M-DP-001 Material Selection D-CR-003
NORSOK M-DP-001 Materials selection H-CR-002
NORSOK M-DP-001 Design Principles, Material Selection M-701
NORSOK M-DP-001 Material Selection R-CR-002
NORSOK M-DP-001 Material Selection U-CR-001
NORSOK M-DP-001 Material Selection. U-CR-003
NORSOK M-DP-001 Material Selection U-CR-007
NORSOK M-DP-001 Material Selection (with relevant substandards for U-DP-001
Surface Preparation, Protective Coating, Cathodic
ARJ/NOR/NORref/doc 23 28/07/00
Protection etc).
NORSOK N-001 Structural design D-010
NORSOK N-001 Structural design (previously N-CR-001) M-101
NORSOK N-001 Structural design M-102
NORSOK N-001 Structural design M-121
NORSOK N-001 Structural design N-005
NORSOK N-002 Collection of metocean data N-001
NORSOK N-002 Collection of metocean data N-005
NORSOK N-005 Condition Monitoring D-010
NORSOK N-005 Condition monitoring of load bearing structures (will N-001
be issued shortly)
NORSOK O-CR-001 Life cycle cost for systems and equipment O-CR-002
NORSOK O-CR-001 Life Cycle cost for systems and equipment (will be P-001
renumbered O-001)
NORSOK O-CR-001 Life cycle cost for systems and equipment (O-001) P-100
NORSOK O-CR-001 Life cycle cost for systems and equipment Z-CR-008
NORSOK O-CR-002 Life cycle cost for production facility Z-CR-008
NORSOK O-DP-001 Operational principles I-CR-004
NORSOK O-DP-001 Operation principles. O-CR-001
NORSOK O-DP-001 Operation principles. O-CR-002
NORSOK O-DP-001 Operational principles. Z-CR-008
NORSOK P-001 Process design L-002
NORSOK P-001 Process design P-100
NORSOK P-CR-002 Life Cycle Cost. U-DP-001
NORSOK R-001 Mechanical equipment L-002
NORSOK R-001 Mechanical equipment P-001
NORSOK R-002 Lifting Equipment R-003
NORSOK R-CR-001 Mechanical equipment R-CR-002
NORSOK R-CR-002 Lifting Equipment D-SR-004
NORSOK R-CR-004 Piping and equipment insulation (will be renumbered P-001
R-004)
NORSOK R-CR-004 Piping and equipment insulation Z-DP-002
NORSOK S-001 Technical safety L-002
NORSOK S-001 Technical safety (presently numbered S-DP-001) N-001
NORSOK S-001 Technical safety Y-001
NORSOK S-002 Working environment C-002
NORSOK S-002 Working Environment D-010
NORSOK S-002 Working environment. E-001
NORSOK S-002 Working environment L-002
NORSOK S-002 Working environment (was S-DP-002) M-501
NORSOK S-002 Working environment Z-001
NORSOK S-003 Environmental Care (presently S-DP-003) D-010
NORSOK S-CR-002 Health, safety and environment during construction. Z-CR-008
NORSOK S-DP-001 Technical safety (will be S-001) C-001
NORSOK S-DP-001 Technical Safety D-DP-001
NORSOK S-DP-001 Technical safety (will be renumbered S-001). E-001
NORSOK S-DP-001 Technical safety I-CR-004
NORSOK S-DP-001 Technical safety (Will be renumbered S-001) P-001
NORSOK S-DP-001 Technical safety (S-001) P-100
NORSOK S-DP-001 Technical Safety R-CR-002
NORSOK S-DP-001 Technical safety (will be renumbered S-001) Z-010
NORSOK S-DP-002 Working Environment (will be S-002) C-001
NORSOK S-DP-002 Working Environment D-DP-001
NORSOK S-DP-002 Working environment. H-CR-001
NORSOK S-DP-002 Working environment I-CR-004
NORSOK S-DP-002 Working environment (Will be renumbered S-002) P-001
ARJ/NOR/NORref/doc 24 28/07/00
NORSOK S-DP-002 Working environment (S-002) P-100
NORSOK S-DP-002 Working Environment R-CR-002
NORSOK S-DP-002 Working environment. S-CR-002
NORSOK S-DP-003 Environmental Care D-DP-001
NORSOK S-DP-003 Environmental care (Will be renumbered S-003 P-001
NORSOK S-DP-003 Environmental Care (S-003) P-100
NORSOK S-DP-003 Environmental Care R-CR-002
NORSOK S-DP-003 Environmental care. S-DP-001
NORSOK standards In particular I-CR-100 “Fiscal measurement systems” I-SR-104
NORSOK T-CR-001 Telecommunication systems E-001
NORSOK T-CR-001 Telecom systems. T-SR-100
NORSOK T-SR-100 Telecom subsystems N-002
NORSOK U-CR-001 Subsea structures and piping systems (will be N-001
renumbered U-002)
NORSOK U-CR-001 Colour and Marking U-CR-001
NORSOK U-CR-001 Subsea Colour and Marking. U-CR-005
NORSOK U-CR-001 Subsea structures and Piping Systems. U-CR-007
NORSOK U-CR-001 Subsea Structures and Piping System. U-DP-001
NORSOK U-CR-003 Subsea X-mas tree system. U-CR-001
NORSOK U-CR-003 Subsea X-mas Tree System. U-CR-007
NORSOK U-CR-003 Subsea X-mas Tree System U-DP-001
NORSOK U-CR-005 Subsea Production Control System U-CR-001
NORSOK U-CR-005 Subsea Production Control System. U-CR-007
NORSOK U-CR-005 Subsea Production Control System U-DP-001
NORSOK U-CR-006 Production Control Umbilical. U-CR-007
NORSOK U-CR-006 Production Control Umbilical U-DP-001
NORSOK U-CR-007 Intervention System U-CR-001
NORSOK U-CR-007 Intervention System U-DP-001
NORSOK U-CR-008 Subsea Colour and Marking. U-CR-007
NORSOK U-CR-008 Subsea Colour and Marking U-DP-001
NORSOK U-DP-001 Principles for design and operation of subsea U-CR-001
production systems
NORSOK U-DR-001 Principals for design and operation of subsea U-CR-007
production systems.
NORSOK Z-001 Documentation for operation (DFO - presently N-001
numbered Z-CR-001)
NORSOK Z-001 Documentation for operation (DFO) N-005
NORSOK Z-001 Documentation for operation Y-001
NORSOK Z-002 Coding system (will be renumbered to Z-002) C-002
NORSOK Z-002 Coding system (presently Z-DP-002) L-002
NORSOK Z-003 Technical information flow requirements (TIFR) Z-001
NORSOK Z-004 CAD Symbol libraries (in preparation) Z-001
NORSOK Z-004 CAD symbol libraries (to be issued in near future) Z-005
NORSOK Z-005 2D-CAD drawing standard Z-001
NORSOK Z-CR-001 Documentation for Operation R-CR-002
NORSOK Z-CR-001 Documentation for operation. U-DP-001
NORSOK Z-CR-001 Documentation for operation. Z-CR-003
NORSOK Z-CR-001 Documentation for operation Z-DP-002
NORSOK Z-CR-002 Component identification Z-DP-002
NORSOK Z-CR-004 CAD legend. Z-CR-003
NORSOK Z-CR-010 Installation of Electrical, Instrument & I-SR-106
Telecommunication
NORSOK Z-CR-010 Installation of electrical, instrumentation & T-SR-100
telecommunication.
NORSOK Z-DP-001 NORSOK standards and data sheets. Z-CR-003
NORSOK Z-DP-001 NORSOK standards and data sheets Z-DP-002
ARJ/NOR/NORref/doc 25 28/07/00
NORSOK Z-DP-002 Coding System. (Will be renumbered Z-002) A-001
NORSOK Z-DP-002 Coding system L-CR-004
NORSOK Z-DP-002 Coding system (Z-002) P-100
NORSOK Z-DP-002 Coding system. U-DP-001
NORSOK Z-DP-002 Coding system (next revision will be renumbered Z- Z-001
002)
NORSOK Z-DP-002 Coding system Z-010
NORSOK Z-DP-002 Coding system. Z-CR-008
NPD Regulations for Emergency Preparedness D-010
NPD Regulations for Loadbearing Structures, etc. D-010
NPD Regulations for drilling and well activities, etc. D-010
NPD Regulations relating to safety zones, etc. D-010
NPD Regulations relating to prohibition on anchorage and D-010
fishing
NPD Regulations for Drilling and Well Activities and D-010
Geological Data Collection
NPD Regulations relating to systematic follow-up of the D-010
working environment
NPD Publication: The arrangement of regulatory supervision D-010
relating to safety and working environment, etc.
NPD Regulation for structural design of loadbearing G-CR-001
structures.
NPD Regulations relating to load bearing structures in the N-001
petroleum activities.
NPD Regulations relating to implementation and use of risk N-001
analysis in the petroleum activities.
NPD Guidelines to regulations relating to load bearing N-001
structures
NPD Guidelines concerning loads and load effects N-001
NPD Guidelines on design and analysis of steel structures N-001
NPD Guidelines to Regulations relating to systematic follow- N-001
up of the working environment in the petroleum
activities
NPD Regulations relating to the collection of environmental N-002
data in the petroleum activities.
NPD YA-538 Menneske maskin forhold i kontrollrom (Not published I-CR-004
in English)
NS 1402 Engineering drawings - Title block and parts list. Z-005
NS 1403/ISO 3098-1 Technical drawings - Lettering Z-005
NS 1544 Vertical cylindical steel tanks for storage of flammable R-001
A, B and C liquids at initial pressure approximately
atmospheric pressure.
NS 17305 Aluminium - Wrought aluminium AlSi1Mg C-002
NS 1758 Copper tubes for capillary soldering. H-CR-002
NS 1759 Capillary solder fittings for copper tubes. H-CR-002
NS 2128 Weights engineering, Terminology. N-001
NS 2129 Weights engineering, Requirements for weight reports. N-001
NS 2129 Offshore Installations, Weight Engineering. Z-001
Requirements for weight reports.
NS 2130 Weights engineering, Specification for weighing of N-001
major assemblies.
NS 2131 Weights engineering, Specification for weight data N-001
from suppliers and weighing of bulk and equipment.
NS 2400 Technical drawings - Buildings - Size and layout of Z-005
drawing sheets
NS 3041 Information Signs. Rules for details and location. C-002
ARJ/NOR/NORref/doc 26 28/07/00
NS 3420 Beskrivelsestekster for bygg og anlegg (Specification M-001
texts for building and construction).
NS 3420 Descriptions for construction and building N-001
NS 3421 Description of technical installations. H-CR-001
NS 3472 Steel structures. Design rules. N-001
NS 3472 Structural Steel - Design Rules. R-001
NS 3472 Structural Steel - Design Rules. R-001
NS 3473 Concrete Structures. Design Rules. M-001
NS 3473 Concrete structures, Design rules. N-001
NS 3481 Soil investigation and geotechnical design of marine G-CR-001
structures.
NS 3481 Soil investigation and geotechnical design for marine N-001
structures.
NS 4054 Colour for identification. L-CR-004
NS 4210 Safety colours and Safety Signs. C-002
NS 4753 Water Analysis S-DP-003
NS 476 Rules for the approval of surface treatment inspectors. M-501
NS 477 Welding. Rules for approval of welding inspectors. M-101
NS 477 Welding. Rules for approval of welding inspectors. M-102
NS 477 Rules for approval of welding inspectors M-601
NS 4815 Determination of occupational noise exposure. S-002
NS 5575 Ventilation ducts. Identification colours. H-CR-001
NS 5581 Pipe threads where pressure-tight joints are not made H-CR-002
on threads.
NS 5820 Supplier documentation of equipment. Z-001
NS 5820 Supplier’s documentation of equipment Z-DP-002
NS 5922 Verification of material compatibility with fluids. U-CR-005
NS 6030-33 Marine Industry Signs. C-002
NS 813 Piping systems. Identification colours for the content. L-CR-004
NS 8172 Measurement of noise levels from technical S-002
installations.
NS-1850 Eyebolts R-003
NS-1851 Eyenuts R-003
NS-EN 10025 Hot rolled products of non-alloy structural steels - C-002
Technical delivery conditions
NS-EN 292-1 Safety Of Machinery - Basic Concepts - General R-003
Principles for Design Part 1
NS-EN 292-2 Safety Of Machinery - Basic Concepts - General R-003
Principles for Design Part 2
NS-EN 354 Lanyards R-003
NS-EN 358 Working Positioning System R-003
NS-EN 360 Retractable type Fall Arresters R-003
NS-EN 361 Full Body Harness R-003
NS-EN 365 General Requirements for Instruction for Use and R-003
Marking
NS-EN 813 Sit harness R-003
NS-ISO 6309 Fire protection, Safety Signs. C-002
OLF Guidelines for Safety Requirements to Temporary D-010
Equipment
OLF 022 Recommended Guidelines for Safety Requirements of R-003
Hired Equipment
OLF document Installasjon av komposittrør offshore - Godkjenning av M-621
montører og installasjonsledere (Approval of Pipe
Fitters and Supervisors), OLF - 1994 (DRAFT).
OLF document Installasjon av komposittrør offshore - Godkjenning av M-621
ispektører (Approval of Inspectors), OLF - 1994
ARJ/NOR/NORref/doc 27 28/07/00
(DRAFT).
OLF/NR Standard Agreement concerning Principal Enterprise D-010
responsibilities.
OLF/NR Recommended Guidelines for systematic follow-up of D-010
the working environment on Mobile Units, etc.
OLF/NR Recommendations for Training of Drilling Personnel D-010
OLF/NR Guidelines for documentation of Mobile Offshore D-010
Units taking part in the petroleum activity
Order no. 522 The Supply of Machinery (Safety) Regulations R-003
Order no. 523 Design of Protective Equipment R-003
Order no. 524 Minimum Health and Safety Requirements for the Use R-003
by Workers of Protective Equipment at the Workplace
PE Elektrisitetestilsynet; Retningslinjer for jording i E-001
maritime anlegg.
POSC Base computer standards, v.2.0. Z-CR-003
PR-C-271 C Shackles. Type IV, Class 6 R-003
prEN 1005 Safety of machinery - Human physical performance. S-002
prEN 1011 Welding - Recommendation for welding of metallic M-101
materials, relevant parts.
prEN 1011 Recommendation for arc welding of specific M-102
requirements for aluminium and its alloy.
prEN 10225 Weldable structural steels for fixed offshore structures. M-101
prEN 10225 M-120
prEN 12195-1 Load Restraint Assemblies - Safety - Calculation of R-003
Forces
prEN 12195-2 Load Restraomt Assemblies - Safety - Web Lashing R-003
Equipment made of Man-made Fibres
prEN 12437 Safety of machinery - Permanent means of access to S-002
machines and industrial plants
prEN 12437 part 1 Choice of a fixed means of access between two levels S-002
prEN 12437 part 2 Working platforms and gangways S-002
prEN 12437 part 3 Stairways, stepladders and guard trails S-002
prEN 12437 part 4 Fixed ladders S-002
prEN 1289 Penetrant testing of welds - acceptance level and M-102
criteria.
prEN 1290 NDE of welds - Magnetic particle testing of welds - M-101
Method.
prEN 1291 NDE of welds - Magnetic particle testing of welds - M-101
Acceptance levels and criteria.
prEN 12937 Safety Of Machinery - Technical Principles and R-003
Specifications for Mobility and for Load Lifting.
prEN 1418 Welding personnel - Approval testing for fully M-101
mechanised and automatic welding.
prEN 1418 Welding personnel - Approval testing for fully M-102
mechanised and automatic welding.
prEN 1418 Welding personnel - Approval testing of welding M-601
operators for fusion welding and resistance weld setters
for fully mechanised and automatic welding of metallic
materials.
prEN 1492-1 Textile slings - Safety - Part 1: Specification for flat R-003
woven Webbing-slings made of Man-made fibres.
prEN 1492-2 Textile slings - Safety - Part 1: Specification for R-003
Round-slings made of Man-made Fibres.
prEN 1597-1 Welding consumable - testing for classification. M-101
prEN 1597-1 Welding consumable - testing for classification. M-102
prEN 1677-1 Components for Slings - Safety. Forged Steel R-003
Components, Grade 8.
ARJ/NOR/NORref/doc 28 28/07/00
prEN 292-3 Safety of machinery - Basic concepts - General R-CR-002
principles for design - Part 3: Additional technical
principles and specifications for mobility and for load
lifting.
prEN 50145 Electric apparatus for potentially explosive gas S-DP-001
atmosphere - Classification of hazardous areas.
prEN 818-4 Short Link Chain for Lifting Purposes - Safety Part 4: R-003
Chain Slings - Grade 8
prEN 818-4 Short link chain for lifting purposes - Safety. R-CR-002
prEN 818-6 Short Link Chain for Lifting Purposes - Safety Part 6: R-003
Chain Slings instruction for Use And Maintenance.
prEN 818-7 Short Link Chain for Lifting purposes - Safety Part 7: R-003
Fine Tolerance Chain for Serial Hoists, Grade T. Types
T, DT, DAT)
prEN 953 Safety of machinery - General requirements for the R-CR-002
design and construction of guards (fixed, movable)
prEN 954 Safety of machinery - Safety related parts of control R-CR-002
system - Part 1 General principles for design
prEN 970 Welding - Visual examination of fusion weded joints. M-102
prEN 982 Safety requirements for fluid power system and R-CR-002
components - Hydraulics.
RAL-1K Farbenübersicht. M-501
SAE J 514
SAE J 518
SAE J343 Test and procedures for SAE 100R series hydraulic U-CR-005
hoses and assemblies.
SAE J517 Hydraulic hoses. U-CR-005
SDH Forskrift nr. 68: Forskrift om vannforsyning og H-CR-002
drikkevann mm.
SMACNA Rectangular industrial duct construction standard. H-CR-001
SMACNA Round industrial duct construction standard. H-CR-001
SOLAS 74 International Convention for the Safety of Lives at Sea J-003
(SOLAS), as amended.
SSPC Vol.2 Steel structures painting manual. M-501
STWC International Convention on Standards of Training, J-003
Certification and Watch keeping for Seafarers, 1978.
TBK 1 - 2 Norwegian Pressure Vessel Code. R-001
TBK 1 & 2 General Rules For Pressure Vessels. R-100
TBK 1-2 Norwegian Pressure Vessel Code. P-001
TEMA Standards of Tubular Exchanger Manufacturers R-001
Association.
TEMA Class R Tubular Exchanger Manufacturing Association. R-100
TRD 611 Speisewasser und Kesselwasser von Dampferzeugern R-001
der Gruppe IV.
U.S. Mil. Spec. Military Specification for Anodes, Corrosion M-503
preventive, Zinc; slab
UK00A M-630
UK-HSE Well control training and certification standards. D-010
UKOOA Specification and Recommended Practices for the Use M-001
of Glass Fibre Reinforced Plastic Piping Offshore.
UKOOA document Specifications and Recommended Practice for the Use M-621
of Glass Fibre Reinforced Plastic Piping Offshore,
1994
UNS S31600 Austenittic stainless steel (type 316) H-CR-001
UNS S31600 Austenittic stainless steel (type 316) H-CR-002
UNS S31603 Austenittic stainless steel (type 316L) H-CR-001
UNS S31603 Austenittic stainless steel (type 316L) H-CR-002
ARJ/NOR/NORref/doc 29 28/07/00
US-MMS Well control training and certification standards. D-010
VMO, 1995: Technical Regulations. Manual on Codes, Volume I.1, N-002
WMO-No.306, Geneva.
VMO, 1996: Guide to meteorological Instruments and Methods of N-002
Observation, WMO-No. 008, Geneva.
VMO/ICAO, 1996: Guide to the Provision of Meteorological Service for N-002
International Helicopter Operations. WMO-No. 842,
Geneva
YA-003 Regulations relating to systematic follow - up of the R-003
Working Environment in the Petroleum Activities
ARJ/NOR/NORref/doc 30 28/07/00