Professional Documents
Culture Documents
APXV9R20B-C Rework WI
APXV9R20B-C Rework WI
CN-WI- 001
APXV9R20B-C Rework WI
Document type: Page
Work Instruction /12 1
Name Department
Signature /Date
Created by
Yang Yuedao QA
Reviewed by
Approved by
Change History
Revision Author Date Change description
Distribution Dept.
MFG IQC Production QC WH Product Quality NPI P&S Purch. R&D Others/其他
__1__份 ____份 ____份 ____份 ______份 ____份 ____份 ____份 ____份 ____份
Proprietary Note: The information contained in this document is considered to be confidential material proprietary to Radio Frequency Systems and is solely for information purposes. The information shall not be used by anyone other
than Radio Frequency Systems to design or construct any of the items depicted, nor shall it be disclosed, duplicated, or copied for any purpose, nor made available to any third party without the prior written consent of a Radio
Frequency Systems official.
<Uncontrolled copy if downloaded or printed, unless there is red stamp “controlled document” on the copy!
Document no° Rev
CN-WI- 001
APXV9R20B-C Rework WI
Document type: Page
Work Instruction /12 2
1. Target
Guide the method of how to disassemble and assemble the top end cap of APXV9R20B-C
2. Tools
Hammer、Gluing gun、Art knife、Plum blossom type screw driver、Slot type screw driver
Document no° Rev
CN-WI- 001
APXV9R20B-C Rework WI
Document type: Page
Work Instruction /12 3
Process Flow For Disassemble and Assemble For Top End Cap
1.Disassemble top end cap
②
①
③ ④
No. Material , tool Quantity
1 Hammer 1
2 Slot type screw driver 1
Document no° Rev
CN-WI- 001
APXV9R20B-C Rework WI
Document type: Page
Work Instruction /12 7
2. Clean up the remained glue on gate of Radome
Using art knife clean remained glue on gate of radome, then using Non-dust cloth with alcohol to clean up.
(Remark:Clean up remained glue, no any remained glue )
Remained
glue
Black
washer
Hammer
Rivet with
black
washer
1 Black rivet 3
2 Black washer 3
3 Hammer 1
Document no° Rev
CN-WI- 001
APXV9R20B-C Rework WI
Document type: Page
Work Instruction /1211
5.Seal bottom end cap with sealant
a. Using non-dust cloth with alcohol to clean up the position of sealant application(Around of bottom end
cap), clean up completely.
1 Alcohol NA
2 Non-dust cloth NA
Document no° Rev
CN-WI- 001
APXV9R20B-C Rework WI
Document type: Page
Work Instruction /1212
1 SMA232 sealant NA
2 Glue gun 1
3 Plum blossom type screw driver 1
4 Non-dust cloth NA