Professional Documents
Culture Documents
Deep Sea Control Panel DSE4510-Data-Sheet
Deep Sea Control Panel DSE4510-Data-Sheet
DSEGenset
4 4 3
DEUTZ
DSE4510/20 ISUZU
MAINS (UTILITY) DC OUTPUT GENERATOR / DC OUTPUT GENERATOR CHARGE FUEL AND START ELECTRONIC
SENSING 4520 1 OF 4 LOAD CURRENT 4510 1 OF 2 SENSING ALTERNATOR OUTPUTS ENGINE CAN
(DSE4520) 4520 1 OF 4 (Flexible with CAN)
VOLTS VOLTS
D+ +
+ + W/L
ISSUE 1
®
DSEGenset
DSE4510/20 SPECIFICATION
DC SUPPLY
AUTO START AND AUTO MAINS FAILURE CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CONTROL MODULES CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
FEATURES supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
DSE4520 without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.
FREQUENCY RANGE
3.5 Hz to 75 Hz
OUTPUTS
OUTPUT A (FUEL)
10 A short term, 5 A continuous,
at supply voltage
KEY BENEFITS • IP65 rating (with optional • Fuel and start outputs OUTPUT B (START)
• Ultimate size to feature ratio gasket) offers increased (configurable when using CAN) 10 A short term, 5 A continuous,
at supply voltage
• Automatically transfers between resistance to water ingress • 4 configurable DC outputs (2 for
mains (utility) and generator DSE4510) AUXILIARY OUTPUTS C & D
(DSE4520 only) KEY FEATURES • 3 configurable analogue/digital 2 A DC at supply voltage
• Hours counter provides accurate • Largest back-lit icon display in inputs AUXILIARY OUTPUTS E & F DSE4520
information for monitoring and its class • 4 configurable digital inputs 2 A DC at supply voltage
maintenance periods • Current sensing, real time clock • Configurable staged loading
GENERATOR
• User-friendly set-up and button & heated display options outputs VOLTAGE RANGE
layout for ease of use available • CAN and alternator speed 15 V to 415 V AC (Ph to N)
• Multiple parameters are • Fully configurable via the fascia sensing in one variant 26 V to 719 V AC (Ph to Ph)
monitored simultaneously which or PC using USB • 3 engine maintainance alarms FREQUENCY RANGE
are clearly displayed on the communication • Engine speed protection 3.5 Hz to 75 Hz
largest back-lit icon display in • Extremely efficient power save • Engine hours counter
DIMENSIONS
its class mode • Engine pre-heat OVERALL
• The module can be configured • 3 phase generator sensing • Engine run-time scheduler 140 mm x 113 mm x 43 mm
to suit a wide range of • 3 phase mains (utility) sensing • Engine idle control for starting & 5.5’’ x 4.4” x 1.7”
applications (DSE4520 only) stopping PANEL CUT-OUT
• Compatible with a wide range • Compatible with 600 V ph - ph • Battery voltage monitoring 118 mm x 92 mm
of CAN engines, including tier 4 nominal systems • Start on low battery voltage 4.6’’ x 3.6”
engine support • Generator/load power • Configurable remote start input MAXIMUM PANEL THICKNESS
• Uses DSE Configuration Suite monitoring (kW, kV A, kV Ar, pf) • 1 alternative configuration 8 mm
PC Software for simplified • Generator overload protection • Comprehensive warning, 0.3”
configuration (kW) electrical trip or shutdown STORAGE TEMPERATURE RANGE
• Licence-free PC software • Generator/load current protection upon fault condition -40°C to +85°C
monitoring and protection • LCD alarm indication
OPERATING TEMPERATURE RANGE
• Event log (15) -30°C to +70°C
-40°C to +70°C (for heated display variant)
RELATED MATERIALS
TITLE PART NO’S OPTIONAL PARTS
DSE4510/20 Installation Instructions 053-157
DSE4510/20 Operator Manual 057-171 PART PART NUMBER
DSE4510/20 Configuration Suite PC Manual 057-172 IP65 Gasket 020-282
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-132/09/12 (4) US
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457