Professional Documents
Culture Documents
D-p5-Bv-pd-012 - Rvi, Issue 01, Rev 00 - Remote Visual Inspection
D-p5-Bv-pd-012 - Rvi, Issue 01, Rev 00 - Remote Visual Inspection
W/ Order No. :
Package No. : 5
THIS DOCUMENT IS CONTROLLED BY THE BUREAU VERITAS - VIETNAM AND MAY NOT BE AMENDED, REVISED OR ALTERED IN
ANY OTHER WAY WITHOUT THE CONSENT OF THAT COMPANY.
THE SIGNATURES BELOW AUTHORISE ALL PAGES OF THIS PROCEDURE FOR USE FROM THE DATE OF APPROVAL AS SHOWN.
Page 1 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
REVISION HISTORY
Page 2 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
INDEX
1.0 Scope 4
4.0 Safety 4
9.0 Records 7
Page 3 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
1.0 SCOPE:
1.1 This procedure describes the requirements for borescope examination of internal
condition pipe using Olympus IFLEX FX IV 8435 and IV 86180 and other equipment.
3.1 Nondestructive testing personnel shall be certified with NDT VT-Level I or II minimum in
accordance with Company Written Practice for Qualification and Certification for NDT
Personnel as per SNT-TC-1A, or a similar document.
3.2 The results will be analyzed by person who is undergone the VT-Level-II Certified with
enough experience.
4.0 SAFETY:
4.1 All personnel are responsible for ensuring that they, as well as their fellow employees
perform their job in a safe and professional manner.
4.2 In addition they will also adhere to any statutory and local safety requirements along with
any Client / Project specific safety requirements.
Page 4 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
The following are the requirements to be executed before commencing the job:
5.1 The Client is to provide the job details such as drawing, numbering or identification
system, prior to the start of inspection.
5.3 The inside surface has to be free from dirt, grease and loose particles and should be
suitable for Visual inspection.
Page 5 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
100-240 V, 50/60
11 Power Supply - AC 100-240 V, 50/60 Hz
Hz
22 Internal Memory 1 GB 1 GB
7.1 Preparation:
Page 6 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
7.1.2 Check condition borescope unit and supporting equipment, Optical Tip, battery
and other.
7.1.3 Ensure that personal safety equipment and workplace conditions meet safety
criteria in accordance with applicable regulations.
7.2 Inspection:
7.2.1 Create a file name in accordance with the equipment to be inspected to facilitate
the creation of report
7.2.2 Insert the Camera Tip into the equipment that needs to be inspected.
7.2.3 Record the condition of inside equipment in the form of video or image as
requested by client.
7.2.7 All the inspection result are copied to the flash disk and transferred to the
computer.
8.1 The acceptance standards for the interpretation of items inspected shall be based on
Client requirements or the Contract Document.
9.0 RECORDS:
9.1 When required by the client, a written report shall be prepared for every borescope
Page 7 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
9.2 The report shall contain, but not limited to the following information:
9.2.11 When a permanent visual record of imperfection and are required, a photograph
or on-scale accurate sketches shall be made indicating exact dimensions.
Page 8 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
ATTACHMENT 1
REPORT FORMAT
Page 9 of 10
BUREAU VERITAS VIETNAM
REMOTE VISUAL INSPECTION
NSRP PROCEDURE DOCUMENT No.:
DCSM PROJECT 2019 D-P5-BV-PD-012
Page 10 of 10