Professional Documents
Culture Documents
03.CCNA 200-125 (VLAN T-Shoot LAB SIM)
03.CCNA 200-125 (VLAN T-Shoot LAB SIM)
03.CCNA 200-125 (VLAN T-Shoot LAB SIM)
Scenario:
Trouble-shoot under this lab.
Step-1
Verify the pre-configuration in all switches with “Show run” and “Show vlan”.
Step-2
On switch 3,
Switch-3#show vlan
Switch 3’s interface E0/0 is not a trunk port and it is now under the Vlan 600 access port.
Switch-3#configure terminal
Step-3
On switch-2,
And also Switch-2’s interface E0/3 must be in vlan 600, not in vlan 500.
Step-4
On switch-1,
Both Switch-1’s interface E0/2 and E0/3 are under the vlan 500, it should be in the correct vlan
Step-5
So we are going to fix this problem in switch-x by changing native vlan value 1 to 600.
On Switch-x,
Step-6