Professional Documents
Culture Documents
PowerFlex 70 - 700 - Parameters To Set Up Datalinks
PowerFlex 70 - 700 - Parameters To Set Up Datalinks
PowerFlex 70 - 700 - Parameters To Set Up Datalinks
Question
What parameters are used to set up datalinks in a PowerFlex 70 or 700 AC Drive?
Environment
20A PowerFlex 70
20B PowerFlex 700
Answer
Parameters 300 [Data In A1] - Parameter 307 [Data In D2] are used for data that the drive is receiving from
the network.
Parameters 310 [Data Out A1] - Parameter 317 [Data Out D2] are used for data that the drive is sending to
the network.
Attachments
DISCLAIMER
This knowledge base web site is intended to provide general technical information on a particular subject or
subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this web site is not
intended to constitute application, design, software or other professional engineering advice or services.
Before making any decision or taking any action, which might affect your equipment, you should consult a
qualified professional advisor.
This page is best viewed in Internet Explorer 11, Edge, Firefox 41, Chrome 46, Safari 9 or newer.
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/533159 1/2
23/01/2019 533159 - PowerFlex 70/700: Parameters to set up datalinks
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/533159 2/2