This document provides specifications for welding API 5L X52 pipe and fittings using SMAW. The pipe has an outside diameter of 12.750 inches and wall thickness of 0.375 inches. The joint design is a square groove weld. Two welders will use E6010 for the root pass and E8010 for the fill and cap passes with a progression in the downward direction. Grinding will be used to clean the pipe, but no preheat or post weld heat treatment is required. Testing parameters are provided for four passes using E7018 electrode between 80-130 amps at 18-23 volts and a travel speed of 0.08 meters per minute.
Original Description:
Especificacion de un procedimiento calificado bajo codigo API 1104
This document provides specifications for welding API 5L X52 pipe and fittings using SMAW. The pipe has an outside diameter of 12.750 inches and wall thickness of 0.375 inches. The joint design is a square groove weld. Two welders will use E6010 for the root pass and E8010 for the fill and cap passes with a progression in the downward direction. Grinding will be used to clean the pipe, but no preheat or post weld heat treatment is required. Testing parameters are provided for four passes using E7018 electrode between 80-130 amps at 18-23 volts and a travel speed of 0.08 meters per minute.
This document provides specifications for welding API 5L X52 pipe and fittings using SMAW. The pipe has an outside diameter of 12.750 inches and wall thickness of 0.375 inches. The joint design is a square groove weld. Two welders will use E6010 for the root pass and E8010 for the fill and cap passes with a progression in the downward direction. Grinding will be used to clean the pipe, but no preheat or post weld heat treatment is required. Testing parameters are provided for four passes using E7018 electrode between 80-130 amps at 18-23 volts and a travel speed of 0.08 meters per minute.
For _________Tubería UNIVERSIDAD LIBRE DE COLOMBIA Pipe and fittings
API 5L X52___________________ Welding of API 5L X52 Process SMAW Material API 5L X52 Pipe outside diameter and wall thickness 12.750” Espesor 0.375” Joint design JUNTA A TOPE CON SOLDADURA DE RANURA EN V Filler metal and number of Pase de fondeo/raiz E6010 beads Pase relleno/presentacion E8010 G Position Weld SOLDADURA EN POSICION Direction of welding PROGRESION DESCENDENTE Number of welders 2 Time lapse between passes 3 MIN Type and removal of lineup clamp PUNTEO Cleaning and/or grinding Con disco abrasivo Preheat/postweld heat treatment N/A Shielding gas and flow rate N/A Shielding flux N/A Speed of travel 4" X MIN Plasma gas composition N/A Plasma gas orifice size N/A Sketches and tabulations attached N/A
3/8" 1/8"
1/16" 30°
1/16"
3/8"
3mm MAX 3mm MAX
metal de aporte corriente velocidad de
Pases clasificacion diametro tipo de poralidad amperios Voltios avance