Professional Documents
Culture Documents
Epon-Olt Web User Manual - 0920
Epon-Olt Web User Manual - 0920
1.1 Description........................................................................................................................ 5
1.2 Login..................................................................................................................................5
2 OLT Configurations...................................................................................................................6
2.1.2 Diagnose.....................................................................................................................7
2.1.6 Service(SSH/SNMP)..................................................................................................10
1.1 Description
Connect the OLT NMS port to IP network. The OLT default management IP is
192.168.100.100 ,Please set your PC IP to 192.168.100.XXX (e.g.192.168.100.90).
1.2 Login
Please open the brower (now support firefox/chrome/IE 9 and up)
Notice:
1. The default username ‘root’ and password ‘123456’,the same with cli;
2. The super username of ‘root’, only login once in WebGUI or CLI, means that: if
you login to CLI by username root, you can not use root to login WebGUI before
you logout;
3. The login timeout is 5mins, There’s no some operations will be logout
automatically after 5mins
4. You need setting the default language in CLI by using “web-lang en”.
The main device information and version information are displayed on the home
page.
2 OLT Configurations
You just change some command in configurations file, you can be success to restore.
Other file will not. Please check it.
5. Save configurations
1. SNMP configuration
It support to config trap server & community
2. SSH Access.
First, you need to add a public key to server.
Notice: you need create a OPENSSH format public key, its type need by legacy,key type
RSA.
4. After done
In user management menu, You can Add/Delete and modify user password
Add user
5. Add a white list onu, You can specify the ONU ID or onu id is 0 will automatically
distribution the ONU ID
6. Press bandwith button will go to bandwith page
7. You can batch process onu , support operations are delete and reject to deny
list
As you press this ONU Batch management:
You can make a choice to get more than one onu to process
2.2.2 ONU Deny list
In this section, if you want to upgrade onu’s firmware, please add upgrade type first
Next, you need bind onu to this upgrade type
IF you bind some onu to this upgrade type, you can check it
Next ,select a file upgrade file and other select upgrade type, select which pon port you
want to upgrade
1. Setting onu basic informations, ONU NAME and descriptions(After input information,
just apply)
2. Reboot ONU
3. Deregister ONU
4. Change fec mode
5. Refresh the ONU optical diagnose
6. Upgrade this ONU firmware
Select a file and apply
1. You can change the PON ID and ONU to specify the ONU
2. You can config the ONU Basic functions
3. Config port vlan
After you select the translate or trunk mode, add the vlan by press add button and
delete
2. Add some vlan to this port, and change these vlans tag mode
Create a vlan
If you only create one vlan, input the same vlan; or create multi-vlan, please input range
2. Add mac(Here you can select the static mac or blackhole mac)
3. Flush mac(select the flush method)
5. Static route
If setting ok: you will get some result ,it shows below:
Setting port
Thank you!