Professional Documents
Culture Documents
Faculty of Mechanical Engineering Technology (Fmet) Unimap: Lab Project
Faculty of Mechanical Engineering Technology (Fmet) Unimap: Lab Project
Faculty of Mechanical Engineering Technology (Fmet) Unimap: Lab Project
LAB PROJECT
FACULTY OF MECHANICAL
ENGINEERING TECHNOLOGY (FMET)
UniMAP
SAFETY FIRST 1
DPT 114/3 – Technology and Handwork Practice SEM1 SA2021/2022
LAB PROJECT
1. Outcome
Ability to design multipurpose products to be manufactured using hand tools in the workshop.
Ability to select suitable processes, raw materials, hand tools, measuring instrument and PPE.
2. Introduction
Students are expected to do a report in group.
2.1 Concepts
Basic metal cutting and sheet metalworking
3. Limitation
There are a few limitation :
3.1 Manufacturing process.
Basic metal cutting and sheet metalworking are the processes to be used to produce
the product.
3.2 Product size
Maximum product size is 30 cm (length) x 30 mm (width) x 30 cm (height)
3.3 Raw material : Mild steel and GI sheet metal
3.5 Group members : 4~5 members.
SAFETY FIRST 2
DPT 114/3 – Technology and Handwork Practice SEM1 SA2021/2022
4. Example
SAFETY FIRST 3
DPT 114/3 – Technology and Handwork Practice SEM1 SA2021/2022
SAFETY FIRST 4
DPT 114/3 – Technology and Handwork Practice SEM1 SA2021/2022
SAFETY FIRST 5
DPT 114/3 – Technology and Handwork Practice SEM1 SA2021/2022
SAFETY FIRST 6
DPT 114/3 – Technology and Handwork Practice SEM1 SA2021/2022
SAFETY FIRST 7