Professional Documents
Culture Documents
PTC88C Command Manual: Kingtype EPON OLT
PTC88C Command Manual: Kingtype EPON OLT
PTC88C Command Manual: Kingtype EPON OLT
COMMAND MANUAL
Kingtype EPON OLT
1.1 COMMAND MODE ......................................................................................................................................... 16
1.4.3 interface............................................................................................................................................ 19
1.4.8 exit..................................................................................................................................................... 23
1.5.4 ps....................................................................................................................................................... 27
1.5.6 df ....................................................................................................................................................... 29
2 / 286
2 FILE MANAGEMENT .............................................................................................................................35
3 / 286
3.2.3 show ip interface ............................................................................................................................. 50
3.6.1 reboot................................................................................................................................................ 56
4.2.1 rate-limit............................................................................................................................................ 62
4 / 286
5.1 PORT PROPERTIES ...................................................................................................................................... 63
5 / 286
7.1.2 pon m15 ........................................................................................................................................... 80
6 / 286
9.1 ACCESS-LIST ............................................................................................................................................... 99
7 / 286
10.4 QUERY .................................................................................................................................................. 129
11.1 THIS CHAPTER MAINLY DESCRIPTION IGMP PON PORT ONU, MULTICAST MANAGEMENT, REMOTE
EXCHANGE PORT AND CONFIGURE, THE CONTROLLABLE MULTICAST REDUCTION AND DISPLAY. .............................. 132
8 / 286
11.4.1 port PORT-ID ctc mcst tag-stripe ............................................................................................... 146
9 / 286
12.1.8 spanning-tree pathcost-method .................................................................................................. 169
10 / 286
14.4 QOS DISPLAY ........................................................................................................................................ 186
11 / 286
16.3.3 show onu-capability ...................................................................................................................... 206
12 / 286
16.9 ONU PORT QUERY .............................................................................................................................. 228
13 / 286
17.3.11 show onu uni statistics ............................................................................................................ 244
14 / 286
17.8.4 onu-alarm threshold ..................................................................................................................... 269
15 / 286
1.1 command mode
16 / 286
1.2 Cancel command
17 / 286
1.4 Mode change command
1.4.1 enable
【command】
enable
【mode】
Monitor mode
【parameters】
none
【description】
【example】
【command】
configure terminal
【mode】
Privilege modem
【parameters】
none
【description】
18 / 286
configure terminal //from privilege mode to global configuration mode
【example】
1.4.3 interface
【command】
no interface vlan-interface
【mode】
【parameters】
【description】
19 / 286
no interface vlan-interface //set management vlan to default
【example】
//enter vlan-interface
1.4.4 onu
【command】
onu LLID
【mode】
20 / 286
【parameters】
【description】
【example】
1.4.5 uni
【command】
uni UNI-PORT-ID
【mode】
【parameters】
【description】
【example】
21 / 286
// enter slot1 pon port 8 onu 1
1.4.6 vlan
【command】
vlan VLAN-ID
【mode】
【parameters】
【description】
vlan VLAN-ID //from global configuration mode to vlan mode(if vlan doesn’t exist,should add vlan)
【example】
22 / 286
1.4.7 access-list
【command】
【mode】
【parameters】
【description】
【example】
1.4.8 exit
【command】
exit
【mode】
Exit mode
23 / 286
【parameters】
none
【description】
【example】
1.4.9 quit
【command】
quit
【mode】
all mode
【parameters】
none
【description】
quit
【example】
24 / 286
1.5 Terminal interface command
1.5.1 cli-password
【command】
【mode】
privilege mode
【parameters】
【description】
【example】
1.5.2 list
【command】
list
【mode】
All mode
【parameters】
25 / 286
none
【description】
【example】
1.5.3 help
【command】
help
【mode】
All mode
【parameters】
none
【description】
【example】
26 / 286
1.5.4 ps
【command】
ps
【mode】
【parameters】
none
【description】
【example】
27 / 286
1.5.5 top
【command】
top
【mode】
【parameters】
None
【description】
28 / 286
top // display system usage rate
【example】
1.5.6 df
【command】
df
【mode】
【parameters】
none
29 / 286
【description】
【example】
1.5.7 ping
【command】
【mode】
monitor mode
【parameters】
【description】
ping IP-ADDR
ping HOST-NAME
【example】
30 / 286
1.5.8 timeout
【command】
timeout [MINUTE]
no timeout
【mode】
Monitor mode
【parameters】
【description】
timeout MINUTE //
【example】
31 / 286
【command】
arp display
【mode】
monitor
【parameters】
none
【description】
【example】
【command】
【mode】
monitor
【parameters】
【description】
32 / 286
arp delete IP-ADDR //delete “IP-ADDR” arp cache
【example】
1.5.10 clear
【command】
clear
【mode】
All mode
【parameters】
none
【description】
【example】
1.5.11show version
【command】
show version
【mode】
33 / 286
All mode
【parameters】
none
【description】
show version
【example】
34 / 286
2 file management
2.1 Configuration file local management
2.1.1 write
【command】
write
【mode】
【parameters】
none
【description】
【example】
【command】
show running-config
【mode】
35 / 286
All mode
【parameters】
none
【description】
【example】
2.1.3 load
【command】
load [FILE-NAME]
【mode】
【parameters】
【description】
36 / 286
load FILE-NAME /load appointed file
【example】
【command】
clear config-file
【mode】
【parameters】
none
【description】
【example】
37 / 286
2.2 file network management
【command】
【mode】
Privilege mode
【parameters】
【description】
【example】
38 / 286
2.2.2 tftp download olt-image
【command】
【mode】
Privilege mode
【parameters】
【description】
tftp download olt-image FILE-NAME IP-ADDR //download OLT image file from server
【example】
【command】
【mode】
39 / 286
Privilege mode
【parameters】
none
【description】
【example】
【command】
【mode】
Privilege mode
【parameters】
40 / 286
Parameters name Format value example
【description】
tftp download onu-image FILE-NAME IP-ADDR //download onu image from server
【example】
【command】
upgrade onu-image
【mode】
【parameters】
none
【description】
【example】
41 / 286
2.3 active and standby system switch
【command】
show file-system
【mode】
All mode
【parameters】
none
【description】
【example】
【command】
switch-over file-system
【mode】
42 / 286
Privilege mode
【parameters】
none
【description】
【example】
43 / 286
3 system setting
3.1 system time and information
3.1.1 date
【command】
date
【mode】
Privilege mode
【parameters】
【description】
【example】
44 / 286
3.1.2 timezone
【command】
timezone TIMEZONE
【mode】
Privilege mode
【parameters】
【description】
【example】
45 / 286
3.1.3 show date
【command】
show date
【mode】
All mode
【parameters】
none
【description】
【example】
【command】
show system
46 / 286
【mode】
All mode
【parameters】
none
【description】
【example】
【command】
show processor
【mode】
All mode
【parameters】
none
【description】
47 / 286
【example】
3.2.1 ip address
【command】
no ip address
【mode】
vlan-interface mode
【parameters】
【description】
48 / 286
ip address IP-ADDR IP-MASK // set ip address and submask
【example】
【command】
【mode】
vlan-interface mode
【parameters】
pa rame ters n a m e f o r m a t v a l u e e x a m p l e
【description】
【example】
49 / 286
3.2.3 show ip interface
【command】
show ip interface
【mode】
All mode
【parameters】
none
【description】
【example】
【command】
no management out-band ip
【mode】
50 / 286
global configuration mode
【parameters】
【description】
【example】
【command】
【mode】
All mode
【parameters】
none
51 / 286
【description】
【example】
3.4.1 hostname
【command】
hostname OLT-NAME
no hostname
【mode】
【parameters】
【description】
52 / 286
【example】
【command】
no device admin-status
【mode】
【parameters】
none
【description】
【example】
53 / 286
3.4.3 show device
【command】
show device
【mode】
all mode
【parameters】
none
【description】
【example】
【command】
【mode】
54 / 286
【parameters】
【description】
【example】
【command】
【mode】
all mode
【parameters】
55 / 286
【description】
【example】
3.6.1 reboot
【command】
reboot [SLOT-ID]
【mode】
privilege mode
【parameters】
【description】
56 / 286
reboot SLOT-ID //reboot board
【example】
【command】
no sntp
【mode】
【parameters】
none
【description】
【example】
57 / 286
3.7.2 sntp interval
【command】
no sntp interval
【mode】
【parameters】
【description】
sntp interval SYN-INTERVAL //Set the SNTP Client to NTP/SNTP Server synchronous clock timing
and time interval, in seconds
【example】
58 / 286
//set to 15s
【command】
no sntp server
【mode】
【parameters】
【description】
【example】
59 / 286
3.7.4 show sntp
【command】
show sntp
【mode】
all mode
【parameters】
none
【description】
【example】
60 / 286
4 Interface configuration
4.1 Show interface information
【command】
【mode】
all mode
【parameters】
none
【description】
【example】
61 / 286
4.2 port speed limit
4.2.1 rate-limit
【command】
【mode】
【parameters】
【description】
【example】
【command】
62 / 286
all mode
【parameters】
【description】
【example】
【command】
【mode】
【parameters】
63 / 286
parameters name format value example
【description】
【example】
【command】
no sni admin-status
【mode】
【parameters】
none
【description】
【example】
64 / 286
5.1.3 sni auto-negotiation
【command】
【mode】
【parameters】
none
【description】
no sni auto-negotiation
【example】
【command】
65 / 286
no sni m15
【mode】
【parameters】
none
【description】
no sni m15
【example】
【command】
no sni h24
【mode】
【parameters】
none
【description】
66 / 286
sni h24 disable //disable 24hrs Performance statistics
【example】
【command】
no sni isolation
【mode】
【parameters】
none
【description】
【example】
【command】
67 / 286
sni mac-address-table dynamic maximum MAX-VALUE
【mode】
【parameters】
【description】
【example】
【command】
【mode】
all mode
【parameters】
68 / 286
parameters name format value example
【description】
【example】
【command】
【mode】
【parameters】
69 / 286
parameters name format value example
【description】
sni mirror session SESSION-ID destination PORT-ID //Set the SNI port mirroring port group
sni mirror session SESSION-ID source PORT-ID both //The port is added to the SNI port mirroring
group source port, two-way
sni mirror session SESSION-ID source PORT-ID rx //Add the port to the SNI port mirroring group
source port into the input direction
sni mirror session SESSION-ID source PORT-ID tx /Add the port to the SNI port mirroring group
source port into the output direction
【example】
70 / 286
5.2.2 show sni mirror
【command】
【mode】
all mode
【parameters】
【description】
【example】
71 / 286
5.3 port storm configuration
【command】
【mode】
SNI mode
【parameters】
m:multicast
B:broadcast
【description】
sni storm-control STORM-MODE PACKET-RATE //Set the SNI port entrance direction of storm
suppression
【example】
72 / 286
5.3.2 show sni storm-control
【command】
【mode】
all mode
【parameters】
【description】
【example】
73 / 286
6 Trunk configuration
6.1 sni-trunk group
【command】
【mode】
【parameters】
parameters n a m e f o r m a t v a l u e exampl
e
【description】
【example】
【command】
74 / 286
no sni-trunk group GROUP-ID name
【mode】
【parameters】
【description】
【example】
【command】
【mode】
【parameters】
75 / 286
parameters name format value example
both-mac:both mac
src-ip: source ip
dst-ip:destination ip
both-ip:both ip
【description】
【example】
【command】
【mode】
【parameters】
76 / 286
parameters name format value exampl
e
【description】
sni-trunk group GROUP-ID add port PORT-ID //add sni to trunk group
sni-trunk group GROUP-ID delete port PORT-ID //del sni from trunk group
【example】
【command】
【mode】
【parameters】
77 / 286
parameters name format value exampl
e
【description】
【example】
【command】
【mode】
all mode
【parameters】
【description】
【example】
78 / 286
//show group 1 trunk information
【command】
no pon admin-status
【mode】
【parameters】
none
【description】
【example】
79 / 286
//enable pon port 1/7
【command】
no pon m15
【mode】
【parameters】
none
【description】
【example】
80 / 286
7.1.3 pon h24
【command】
no pon h24
【mode】
【parameters】
none
【description】
【example】
81 / 286
7.1.4 pon isolation
【command】
no pon isolation
【mode】
【parameters】
none
【description】
【example】
82 / 286
//enable isolation
【command】
【mode】
【parameters】
【description】
pon mac-address-table dynamic maximum MAX-VALUE //set pon port mac learning max count
83 / 286
【example】
【command】
no onu max-distance
【mode】
PON mode
【parameters】
【description】
【example】
84 / 286
//set distance to 50 KM
【command】
【mode】
all mode
【parameters】
【description】
85 / 286
【example】
【command】
no pon crypto
【mode】
【parameters】
none
【description】
86 / 286
no pon crypto //set to default
【example】
//disable
【command】
【mode】
【parameters】
none
【description】
87 / 286
pon crypto mode aes48 //set encryption mode to AES 48
【example】
【command】
【mode】
【parameters】
88 / 286
parameters name format value example
【description】
【example】
【command】
【mode】
89 / 286
all mode
【parameters】
【description】
【example】
【command】
【mode】
PON mode
【parameters】
90 / 286
parameters name format value example
b:broadcast
【description】
pon storm-control STORM-MODE PACKET-RATE //Set the PON port entrance direction of storm
suppression
【example】
【command】
【mode】
all mode
【parameters】
91 / 286
parameters name format value example
【description】
【example】
【command】
no p2p mode
【mode】
PON mode
【parameters】
none
【description】
p2p mode full // This PON port all ONU can communicate
92 / 286
no p2p mode // set to default .default is disable
【example】
【command】
【mode】
all mode
【parameters】
【description】
【example】
93 / 286
7.5 port optical transmission
【command】
【mode】
all mode
【parameters】
【description】
【example】
94 / 286
8.1 mac-address-table aging-time
【Command 】
no mac-address-table aging-time
【Mode】
【Parameters】
【Description】
mac-address-table aging-time AGING-TIME // Configure the MAC address learning table aging
time
no mac-address-table aging-time// "MAC address learning table aging time" revert to default
values.
【Example】
95 / 286
8.2 clear mac-address-table dynamic
【Command 】
【Mode】
【Parameters】
【Description】
clear mac-address-table dynamic// Remove all records of dynamic MAC address learning table
clear mac-address-table dynamic address MAC-ADDR// Dynamic MAC address learning table
records clear MAC address matches
clear mac-address-table dynamic interface PORT-ID// Clear the Dynamic MAC address learning
table with matching port ID
clear mac-address-table dynamic vlan VLAN-ID// Clear the Dynamic MAC address learning table
with matching VLAN ID
【Example】
96 / 286
8.3 mac-address-table static
【command】
【mode】
【Parameters】
【Description】
mac-address-table staticMAC-ADDR VLAN-ID PORT-ID// Add a static MAC address learning table
【Example】
97 / 286
8.4 show mac-address-table
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
98 / 286
show mac-address-table interface PORT-ID// Show MAC Address Table of Port ID
show mac-address-table dynamic interface PORT-ID// Show Dynamic MAC Address Table of Port
ID
show mac-address-table dynamic vlan VLAN-ID // show Dynamic MAC Address Table of VLAN ID
【Example】
9 ACL Configure
9.1 access-list
【Command 】
no access-list ACL-INDEX
【Mode】
【Parameters】
99 / 286
Parameters Name Format value Example
【Description】
access-list { mac | standard | extended } ACL-NAME // Create a ACL list, and entered the list of
ACL configuration (add, delete rule) Mode. If the list already exists, directly into the ACL list of rules for
configuration, add and delete operations.
【Example】
100 / 286
9.1.1 permit
【Command 】
【Mode】
【Command 】
【Mode】
【Command 】
【Mode】
【Parameters】
101 / 286
Parameters Name Format value Example
102 / 286
【Example】//Create a rule which allows "MAC 0012.3456.789b"
9.1.2 deny
【Command 】
【Mode】
【Command 】
deny{SRC-IP-WITH-MASK | any }
【Mode】
【Command 】
【Mode】
【Parameters】
103 / 286
Parameters Name Format value Example
104 / 286
Parameters Name Format value Example
【Example】
9.1.3 no
【Command 】
no RULE-INDEX
【Mode】
105 / 286
【Parameters】
【Description】
no RULE- INDEX /Delete a rule from the current list of ACL ACL
【Example】
9.1.4 show
【Command 】
show
【Mode】
【Parameters】
none
【Description】
show // Show the existing ACL rules of the current list of ACL (and its Index , in order to delete)
106 / 286
【Example】
9.2 access-group
【Command 】
no access-groupname ACL-NAME
【Mode】
【Parameters】
【Description】
access-group Index ACL-INDEX // The ACL Index ID mount ACL list to port
no access-group Index ACL-INDEX // Delete the mount in the port list by ACL Index ID ACL
no access-groupname ACL-NAME// Delete the mount in the port list by ACLName ACL
107 / 286
【Example】
【Command 】
show access-lists[ACL-INDEX ]
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
show access-listsACL-INDEX // Display has been created by ACL Index ID ACL list
108 / 286
show access-lists name ACL-NAME // ACL list has been created by ACLName
【Example】
【Command 】
show access-group[PORT-ID]
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
show access-group // All that has been created and mounted ACL list
【Example】
109 / 286
//Mount to port ACL display list
10 VLAN configuration
10.1 Vlan create
10.1.1vlan create
【Command 】
no vlan VLAN-LIST
【Mode】
【Parameters】
P a rame te rs N a m e F o r m a t v a l u e Example
【Description】
【Example】
110 / 286
10.2 mode configuration
10.2.1vlan
【command】
vlan VLAN-ID
【mode】
【parameters】
【description】
vlan VLAN-ID // Add VLAN (after the use of this command, enter the VLAN configuration mode of
VLAN properties configuration.)
【example】
10.2.1.1 name
【Command 】
name VLAN-NAME
no name
【Mode】
111 / 286
vlanConfigure Mode
【Parameters】
Parameters N a m e F o r m a t v a l u e Example
【Description】
【Example】
10.2.1.2 add
【Command 】
【Mode】
vlanConfigure Mode
【Parameters】
112 / 286
Parameters Name Format value Example
【Description】
【Example】
10.2.1.3 remove
【Command 】
remove PORT-ID
【Mode】
vlanConfigure Mode
【Parameters】
113 / 286
Parameters Name Format value Example
【Description】
【Example】
10.2.1.4 clear
【Command 】
【Mode】
vlanConfigure Mode
【Parameters】
【Description】
114 / 286
clear tagged //Delete all tagged Port from vlan
【Example】
【Command 】
【Mode】
【Parameters】
115 / 286
【Description】
no vlan port svlan tpID // "Port svlan tpID" to restore the default value
【Example】
【Command 】
【Mode】
【Parameters】
116 / 286
Parameter Name Format value Example
s
【Description】
no vlan port cvlantpID // "Port cvlan tpID" to restore the default value
【Example】
【Command 】
【Mode】
117 / 286
Global Configuration Mode or PON、SNI Port Configure Mode
【Parameters】
【Description】
【Example】
【Command 】
118 / 286
no vlan port priority
【Mode】
Global Configuration Mode or PON、SNI Port Configure Mode or UNI interface Mode
【Parameters】
【Description】
【Example】
【Command 】
119 / 286
vlan port pvID PV-ID
【Mode】
Global Configuration Mode or PON、SNI Port Configure Mode or UNI Interface Mode
【Parameters】
【Description】
【Example】
120 / 286
10.3.6vlan port mode
【Command 】
【Mode】
【Parameters】
【Description】
【Example】
121 / 286
//Configure Port vlan Mode as translation
【Command 】
【Mode】
Global Configuration Mode or PON Port Configure Mode or UNI Interface Mode
【Parameters】
OLD-VLAN-LIST Old VLAN List Integer,Support operator “,”、“-” [1, 4094] 10,20-50
【Description】
vlan port translation addany NEW-VLAN-ID// VLAN translation (1:1) mode, add VLAN ID
122 / 286
conversion relationship (all VLAN ID are translated NEW-VLAN-ID, existing configuration data if there is a
conversion between the same source VLAN-ID, is to cover the configuration mode), configure the remote
ONU does not support this command.
vlan port translation add OLD-VLAN-LIST NEW-VLAN-ID// VLAN (N:1) mode, add VLAN ID
(conversion, conversion if the same source VLAN-ID configuration data in the coverage configuration)
vlan port translation delete OLD-VLAN-LIST/ VLAN (N:1) mode, ID (VLAN conversion delete
existing configuration data without the same source VLAN-ID, do not do processing)
vlan port translationclear// VLAN (N:1) mode, conversion to clear all VLAN configuration data
【Example】
【Command 】
123 / 286
vlan port translation clear
【Mode】
Global Configuration Mode or PON Port Configure Mode or UNI Interface Mode
【Parameters】
OLD-VLAN-LIST Old VLAN List Integer,Support operator “,”、“-” [1, 4094] 10,20-50
【Description】
vlan port translation addany NEW-VLAN-ID// VLAN translation (1:1) mode, add VLAN ID
conversion relationship (all VLAN ID are translated NEW-VLAN-ID, existing configuration data if there is a
conversion between the same source VLAN-ID, is to cover the configuration mode), configure the remote
ONU does not support this command.
vlan port translation add OLD-VLAN-LIST NEW-VLAN-ID// VLAN (N:1) mode, add VLAN ID
(conversion, conversion if the same source VLAN-ID configuration data in the coverage configuration)
vlan port translation delete OLD-VLAN-LIST/ VLAN (N:1) mode, ID (VLAN conversion delete
existing configuration data without the same source VLAN-ID, do not do processing)
vlan port translationclear// VLAN (N:1) mode, conversion to clear all VLAN configuration data
【Example】
124 / 286
// The relationship between VLAN ModeAdd VLAN ID polymerization conversion
【Command 】
【Mode】
【Parameters】
CVLAN-LIST Cvlan List Integer, Support operator “,”、“-” [1, 4094] 10,20-50
125 / 286
Parameters Name Format value Example
【Description】
vlan port qinq addany SVLAN-ID// VLAN qinqMode, Add VLAN ID (the conversion of all VLAN ID in
the outer SVLAN-ID, existing Configure data if the same Source VLAN-ID transformation, is to cover the
Configure)
vlan port qinq addany SVLAN-ID NEW-COS// VLAN qinqMode, add VLAN ID conversion
relationship (all VLAN ID is in the outer layer play SVLAN-ID, existing the configure data if have conversion
between the same source VLAN-ID to cover the configure) and configure the new cos value, the
vlan port qinq add CVLAN-LISTSVLAN-ID// VLAN qinqMode, Add VLAN ID (conversion, conversion
if the same Source VLAN-ID existing in Configure data is to cover the Configure)
vlan port qinq add CVLAN-LISTSVLAN-ID NEW-COS// VLAN qinqMode, Add VLAN ID (conversion,
conversion if the same Source VLAN-ID existing in Configure data in Configure, and Configure coverage)
new cos value
vlan port qinqdeleteCVLAN-LIST// VLAN qinqMode, delete VLAN ID (the conversion of existing
Configure data without the same Source VLAN-ID, do not do processing)
vlan port qinqclear // VLAN qinqMode, VLAN Configure conversion to clear all data
【Example】
126 / 286
10.3.10 vlan port trunk
【Command 】
【Mode】
Global Configuration Mode or SNI、PON Port Configure Mode or UNI Interface Mode
【Parameters】
TRUNK-VLAN-LIST Vlan List Integer, Support operator “,”、“-” [1, 4094] 10,20-50
【Description】
vlan port trunk add any// VLAN trunk Mode, Add trunk list (VLAN ID all through the remote Configure
ONU), does not support the Command
vlan port trunk add TRUNK-VLAN-LIST// VLAN trunk Mode, Add TRUNK-VLAN-LIST
vlan port trunkdeleteTRUNK-VLAN-LIST // VLAN trunk Mode, delete TRUNK-VLAN-LIST (the data
of Configure without the same Source VLAN-ID, do not do processing)
vlan port trunk clear // VLAN trunk Mode, trunk listConfigure to clear all data
【Example】
127 / 286
// vlan trunk add trunk list
【Command 】
【Mode】
【Parameters】
TRUNK-VLAN-LIST vlan List Integer, Support operator “,”、“-” [1, 4094] 10,20-50
【Description】
vlan port strunk add any// VLAN strunkMode, Add Strunk list (VLAN ID all through)
128 / 286
vlan port strunk add TRUNK-VLAN-LIST//vlan strunkMode ,Add TRUNK-VLAN-LIST
vlan port strunk clear // VLAN strunkMode, clear all Strunk listConfigure data
【Example】
10.4 query
10.4.1show vlan
【command】
【mode】
all mode
【Parameters】
129 / 286
Parameters Name Format value Example
【Description】
show onu SLOTID/PORTID:LLID vlan port PORT-ID// The remote ONU Port Configure information
display
【Example】
10.4.2show vlan-port
【Command 】
【Mode】
130 / 286
ONUMode or UNIMode
【Parameters】
【Description】
show vlan-port // ONU Port VLAN Configure information, can only run in onuMode
show vlan-port PORT-ID // Uni Port VLAN Configure, can run on ONU and uniMode
【Example】
131 / 286
11 IGMP Configure
11.1 This chapter mainly Description IGMP PON Port ONU, multicast management,
remote exchange Port and Configure, the controllable multicast reduction and display.
11.2.1ip igmp
【Command 】
【Mode】
【Parameters】
none
【Description】
【Example】//enable igmp
132 / 286
11.2.2 ip igmp multicast vlan create
【Command 】
【Mode】
【Parameters】
【Description】
ip igmp multicast vlan create VLAN-ID-RANGE // Create a multicast VLAN, the multicast VLAN
allows up to create 256, and 1 and 4094 have been occupied, cannot create
【Example】
【Command 】
133 / 286
no ip igmp multicast vlan VLAN-ID interface
【Mode】
【Parameters】
【Description】
ip igmp multicast vlan VLAN-ID interface // Port Add to VLAN multicast. In the global Mode, Add,
SNI all PON Port; in Port Mode, Add the Port.
no ip igmpmulticast vlan VLAN-ID interface //cancel Port Add to VLAN multicast. In the global
Mode, Add, SNI all PON Port; in Port Mode, Add the Port.
【Example】
【Command 】
【Mode】
134 / 286
Arbitrarily Mode
【Parameters】
【Description】
【Example】
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
135 / 286
show ip igmp multicast vlan VLAN-IDinterface // Displays the specified multicast VLAN Port
information
【Example】
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
【Example】
136 / 286
11.3.2ip igmp-proxy mode
【Command 】
no ip igmp-proxy mode
【Mode】
【Parameters】
【Description】
【Example】
【Command 】
137 / 286
no ip igmp-proxy query-interval
【Mode】
【Parameters】
【Description】
ip igmp-proxy query-interval TIME-QI// Packet interval Configure multicast agent sends the query
multicast member (between TIME-QI seconds to query the multicast group members)
no ip igmp-proxy query-interval // The message time interval "multicast agent sends the query
multicast members revert to default values.
【Example】
【Command 】
no ip igmp-proxy max-query-response-interval
【Mode】
138 / 286
Global Configuration Mode
【Parameters】
【Description】
【Example】
//The maximum response time interval Configure query multicast members of the agent
139 / 286
11.3.5ip igmp-proxy last-member-query-interval
【Command 】
no ip igmp-proxy last-member-query-interval
【Mode】
【Parameters】
【Description】
【Example】
140 / 286
//The last member query interval allocation in multicast group
【Command 】
no ip igmp-proxy last-member-query-count
【Mode】
【Parameters】
【Description】
141 / 286
ip igmp-proxy last-member-query-count TIMES-LMQC// The final allocation of members in the
multicast group (based on the number of queries to the Configure value of the query interval query, query)
【Example】
【Command 】
no ip igmp-proxy robust
【Mode】
【Parameters】
【Description】
142 / 286
【Example】//The configuration of multicast robustness variable
11.3.8show ip igmp
【Command 】
show ip igmp
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
show ip igmp // Display IGMP configuration information (switch, version, and the last member query
interval query, robustness)
【Example】
143 / 286
11.3.9ip igmp-proxy create
【Command 】
no ip igmp-proxy IGMP-NAME
【Mode】
【Parameters】
【Description】
【Example】
144 / 286
11.3.10 show ip igmp-proxy groups
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
【Example】
【Command 】
【Mode】
Arbitrarily Mode
145 / 286
【Parameters】
none
【Description】
【Example】
【Command 】
【Mode】
ONUMode
【Parameters】
【Description】
146 / 286
port PORT-ID ctc mcst tag-stripe enable // Configure tag-stripe, the removal of multicast packets
received by ONU under VLAN tag
port PORT-ID ctc mcst tag-stripe disable // Configure tag-stripe, do not remove downward multicast
message received by ONU VLAN tag
no port PORT-ID ctc mcst tag-stripe // "VLAN tag stripping switch downlink multicast packets
received by ONU as the default recovery
【Example】
//The configuration characteristics of tag-stripe, removal of multicast packets received by ONU under
VLAN tag
11.4.2show ip mcst
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
show ip mcst onu ONU-ID port PORT-ID// VLAN group multicast uni Port added information
【Example】
147 / 286
VLAN group multicast uni Port added information
【Command 】
ip igmp-packagegroup GROUP-ID
no ip igmp-packagegroup GROUP-ID
【Mode】
【Parameters】
【Description】
【Example】
148 / 286
//create multicast service packages
【Command 】
【Mode】
【Parameters】
【Description】
149 / 286
no ip igmp-package group GROUP-ID name //cancel the multicast service packet Name
【Example】
【Command 】
【Mode】
【Parameters】
【Description】
150 / 286
ip igmp-package group GROUP-ID proxy add PROXY-LIST//Add multicast service packages
proxy List
ip igmp-package group GROUP-ID proxy clear //clear multicast service packages proxy List
【Example】
【Command 】
【Mode】
【Parameters】
151 / 286
Parameters Name Format value Example
【Description】
ip igmp-package group GROUP-ID user-authority permit// Set multicast service packages user
access authority is permit
ip igmp-package group GROUP-ID user-authority preview// Set multicast service packages user
access authority is preview
ip igmp-package group GROUP-ID user-authority deny// Set multicast service packages user
access authority is preview deny
【Example】
【Command 】
152 / 286
no ip igmp-package group GROUP-ID max-request-channel
【Mode】
【Parameters】
【Description】
【Command 】
153 / 286
ip igmp-package group GROUP-ID single-preview-time PREVIEW-TIME
【Mode】
【Parameters】
【Description】
【Example】
154 / 286
11.5.7ip igmp-package group total-preview-time
【Command 】
【Mode】
【Parameters】
【Description】
【Example】
155 / 286
//set multicast service packages The total length of the preview
【Command 】
【Mode】
【Parameters】
【Description】
156 / 286
no ip igmp-package group GROUP-ID preview-reset-time//set“ multicast service packages
Preview reset interval”as default
【Example】
【Command 】
【Mode】
【Parameters】
157 / 286
【Description】
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
158 / 286
show ip igmp-package group GROUP-ID// Multicast service packages (Name, List, information
agent user access request, maximum number of channels, single preview length, total length, preview
preview, preview the number of reset time etc.)
show ip igmp-package group all// Multicast service packages to display all the information (Name,
agent List, user access request, maximum number of channels, single preview length, total length, preview
preview, preview the number of reset time etc.)
【Example】
【Command 】
【Mode】
ONUMode
【Parameters】
159 / 286
Parameters Name Format value Example
【Description】
port PORT-ID controlled-multicast package delete PACKAGE-LIST// delete UNI Port permit join
multicast service packages List
port PORT-ID controlled-multicast package clear//cancel UNI Port permit join all multicast
service packages List
【Example】
【Command 】
【Mode】
ONUMode
【Parameters】
160 / 286
Parameters Name Format value Example
【Description】
no port PORT-ID controlled-multicast bandwIDth// Set the maximum bandwidth of UNI Port
receiving multicast service to the default value
【Example】
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
161 / 286
Parameters Name Format value Example
【Description】
showonu LLID port PORT-ID controlled-multicast// Display uni users on the Port program package
permission and bandwidth information
【Example】
//Display uni users on the Port program package permission and bandwidth information
162 / 286
12 STP Configure
12.1 Global Configuration
12.1.1spanning-tree
【Command 】
spanning-tree
no spanning-tree [forward]
【Mode】
【Parameters】
【Description】
spanning-tree // Open the Spanning Tree protocol, the default value is closed.
no spanning-tree [forward] // Restore default value (close Spanning Tree protocol). Forward said
that Port is still in the forwarding state.
【Example】
12.1.2spanning-tree mode
【Command 】
no spanning-tree mode
163 / 286
【Mode】
【Parameters】
none
【Description】
【Example】
12.1.3spanning-tree priority
【Command 】
spanning-treepriorityPRIORITY
no spanning-tree priority
【Mode】
【Parameters】
164 / 286
Parameters Name Format value Example
【Description】
【Example】
12.1.4spanning-tree max-age
【Command 】
spanning-tree max-ageAGING-TIME
no spanning-tree max-age
【Mode】
【Parameters】
165 / 286
Parameters Name Format value Example
【Description】
spanning-tree max-age AGING-TIME// The aging time of the root bridge spanning tree Configure.
no spanning-tree max-age// "Aging" root bridge spanning tree to restore to the default value of 20
seconds.
【Example】
12.1.5spanning-tree hello-time
【Command 】
spanning-tree hello-timeHELLO-TIME
no spanning-tree hello-time
【Mode】
【Parameters】
166 / 286
Parameters Name Format value Example
【Description】
spanning-tree hello-time HELLO-TIME// set the root bridge spanning tree of Message transmission
time interval.
no spanning-tree hello-time// The message transmission time interval "root bridge spanning tree to
restore to the default value of 2 seconds.。
【Example】
2(HELLO-TIME + 1) ≤ AGING-TIME。
// set the root bridge spanning tree of Message transmission time interval.
12.1.6spanning-tree forward-time
【Command 】
spanning-tree forward-timeFORWARD-DELAY
no spanning-tree forward-time
【Mode】
【Parameters】
167 / 286
Parameters Name Format value Example
【Description】
no spanning-tree forward-time// The conversion of the root bridge spanning tree delay recovery "as
the default, 15 seconds.
【Example】
【example】
12.1.7spanning-tree tx-hold-count
【Command 】
spanning-tree tx-hold-countNUMBERS
no spanning-tree tx-hold-count
【Mode】
【Parameters】
168 / 286
Parameters Name Format value Example
【Description】
no spanning-treetx-hold-count// The second tree up to send the BPDU number "revert to its default
value 6.
【Example】
12.1.8spanning-tree pathcost-method
【Command 】
no spanning-tree pathcost-method
【Mode】
【Parameters】
【Description】
169 / 286
port path, set the value for the long plastic (long) or short (short).
no spanning-tree pathcost-method// The default cost Port spanning tree path calculation method to
restore the default, SSTP: short (short), RSTP, MSTP: integer length (long).
【Example】
//The default configuration cost calculation method of port path, set the value for the long
12.2.1switchport
【Command 】
switchport
no switchport
【Mode】
【Parameters】
none
【Description】
【Example】
170 / 286
12.2.2spanning-tree port-priority
【Command 】
spanning-tree port-priorityPRIORITY
no spanning-tree port-priority
【Mode】
【Parameters】
【Description】
【Example】
171 / 286
12.2.3spanning-tree port-cost
【Command 】
spanning-tree port-costPORT-COST
no spanning-treeport-cost
【Mode】
【Parameters】
【Description】
【Example】
12.3 query
12.3.1show spanning-tree
【Command 】
172 / 286
show spanning-tree [interface PORT-ID | forward-time | hello-time | max-age | tx-hold-count |
pathcost-method]
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
show spanning-tree // The topology information display information and the parameters of STP
spanning trees
show spanning-tree interface PORT-ID// display Specify the Port STP information
【Example】
173 / 286
//show SPT Global Configuration
【Command 】
protect-group GROUP-IDprimaryPORT-ID-PON1secondaryPORT-ID-PON2
no protect-group GROUP-ID
【Mode】
【Parameters】
174 / 286
Parameters Name Format value Example
【Description】
no protect-group GROUP-ID// According to the current ID GROUP-ID delete Protection Group OLT
port protection group
【Example】
13.1.2protect-group enable
【Command 】
【Mode】
175 / 286
【Parameters】
【Description】
protect-group GROUP-ID enable // According to the current open GROUP-ID protection group
protect-group GROUP-ID disable // According to the current GROUP-ID disable protection group
【Example】
13.1.3protect-group forced-switch
【Command 】
【Mode】
【Parameters】
176 / 286
Parameters N a m e F o r m a t v a l u e Exampl
e
【Description】
13.1.4protect-group lock
【Command 】
【Mode】
【Parameters】
【Description】
protect-group GROUP-ID lock primary // Lock protection work for the link group link
protect-group GROUP-ID lock secondary // Lock the backup link protection group for links
protect-group GROUP-ID lock null // Not the lock protection group link
【Example】
177 / 286
//lock protection group link
13.1.5show protect-group
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
show protect-group GROUP-ID// Display the Configure information and the operation state of a
protection group
show protect-group all// Display the Configure information and the operation state of all protection
group
【Example】
178 / 286
//Display the Configure information and the operation state of a protection group
14 QOS configure
14.1 Global QOS configure
14.1.1qos global
【Command 】
no qos globalbased
【Mode】
【Parameters】
【Description】
qos global based device // Configure QOS global parameters based on equipment
qos global based port // Configure QOS global parameters based on Port
【Example】
179 / 286
14.1.2show qos global
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
(the maximum queue number, based on the equipment, based on the model [port])
【Example】
14.2.1qos map
【Command 】
180 / 286
qos { cos | diffserv } mapQUEUE-IDPRIORITY-LIST
【Mode】
【Parameters】
【Description】
【Example】
181 / 286
//Configure QOS CoS priority queue mapping table
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
show qos map // Display all the Port QoS mapping table
show qos map port PORT-ID // Display one Port QoS mapping table
【Example】
182 / 286
//Display all the Port QoS mapping table
【Command 】
【Mode】
【Parameters】
【Description】
qos scheduler policy sp // Configure the priority queue scheduling strategy. In global configuration
mode using the command, will have an impact on all ports strict priority queue scheduling strategy; and the
command on interface configuration mode in the following configuration will only affect the the port strict
priority queue scheduling strategy
qos scheduler policy wrr// Configure the priority queue scheduling strategy. Use this command in
global configuration mode, will affect all ports weighted round robin queue scheduling strategy; and in the
following configuration interface configuration mode of the order, will affect only the weighted round robin
queue scheduling strategy of the port
qos scheduler policy spwrr // Configure the priority queue scheduling strategy. In the global
configuration mode using the command, will have an impact on all ports strict priority + weighted round
183 / 286
robin queue hybrid scheduling strategy; and in the interface configuration mode in the following
configuration command will only affect the the port of strictly priority + weighted round robin queue hybrid
scheduling strategy
no qos scheduler policy // Configure the priority queue scheduling strategy. Use this command in
global configuration mode, will affect all port priority queue scheduling strategy; and in the following
configuration interface configuration mode of the order, will only affect the priority queue scheduling
strategy of the port
【Example】
【Command 】
qos schedulerweightWEIGHT-LIST
no qos schedulerweight
【Mode】
【Parameters】
184 / 286
Parameters Name Format value Exampl
e
【Description】
【Example】
【Command 】
185 / 286
【Mode】
Arbitrarily Mode
【Parameters】
【Description】
show qos policy // Show all Port queue scheduling Parameters (weight, scheduling, bandwidth)
show qos policy port PORT-ID // Show one Port queue scheduling Parameters
【Example】
14.4.1show qos
【Command 】
【Mode】
Arbitrarily Mode
【Parameters】
186 / 286
Parameter Name Format value Example
s
【Description】
show qos // display all Port qosConfigure (Global Configuration Parameters, the column mapping
table, queue scheduling Parameters)
show qos port PORT-ID // display one Port qosConfigure (Global Configuration Parameters, the
column mapping table, queue scheduling Parameters)
187 / 286
15 Performance Statistics
15.1.1Global statistics max
【command】
【mode】
【parameters】
24hrs:[1,30]
【description】
【example】
【command】
188 / 286
show statistics max
【mode】
all mode
【parameters】
none
【description】
【example】
15.2.1show statistics
【command】
【mode】
all mode
【parameters】
189 / 286
parameters name format value example
【description】
【example】
190 / 286
15.2.2clear statistics
【command】
【mode】
【parameters】
none
【Description】
clear statistics current // Clear current performance statistics. If in Global Configuration Mode, it
clears all ports in the performance statistics; if in port configuration Mode, clears the current port current
performance statistics
clear statistics m15 // Clear performance tables 15 minutes period. If in Global Configuration Mode,
it clears all performance statistics 15 minutes segment port; if in port configuration Mode, clears the current
port performance statistics 15 minute period
clear statistics h24 // Clear Performance statistics 24 hours period. If in Global Configuration Mode,
it clears all performance statistics 24-hour time period port; if in port configuration Mode, clears the current
port performance statistics 24-hour period【Example】
【example】
191 / 286
15.3 Statistical threshold
15.3.1statistics threshold
【command】
【mode】
【Parameter】
192 / 286
Parameter Name Format Value Example
【Description】
statistics threshold FIELD-TYPE MIN MAX // Setting the threshold performance statistics (Value)
【Example】
【Command】
【Mode】
All mode
【Parameter】
193 / 286
Parameter Name Format Value Example
【Description】
show statistics threshold PORT-ID // Display performance statistics of the Threshold Value
【Example】
194 / 286
16 ONU Remote config
16.1 ONU device config
16.1.1onu-reboot
【command】
onu-reboot
【mode】
ONU mode
【command】
【mode】
【Parameter】
【Description】
【Example】
195 / 286
//Reboot onu id is "1/6: 1" ONU
16.1.2onu-switchover
【command】
onu-switchover
【mode】
【command】
【mode】
【Parameter】
【Description】
onu-switchover // Under the current onu ONU Mode switching system directly
196 / 286
onu-switchover mac-address MAC-ADDR // For macAddress system is switched to "MAC-ADDR"
of ONU
【Example】
16.1.3onu-deregister
【command】
onu-deregister
【mode】
ONU mode
【command】
【mode】
【Parameter】
197 / 286
Parameter Name Format Value Example
【Description】
【Example】
16.1.4onu-image-switch
【Command】
onu-image-switch
【Mode】
Privilege Mode
【Parameter】
【Description】
【Example】
198 / 286
16.1.5show onu-image upgrade
【Command】
【Mode】
All Mode
【Description】
show onu-image upgrade // Displays status information IP mirroring upgrade (the "wait for the
upgrade" "Upgrade Failed", "Upgrade Success" and "partition toggle completed" four states)
【Example】
16.1.6show onu-list-info
【Command】
199 / 286
show onu-list-info [PORT-ID]
【Mode】
All Mode
【Parameter】
PORT-ID PON port ID Port type+Slot number / port PORT TYPE:P、p P1/2
number
【Description】
show onu-list-info // Show all ONU OLT online registration, list offline
show onu-list-info PORT-ID // ONT online display an EPON OLT port, register, list offline
【Example】
200 / 286
16.2 PON Port information
16.2.1show onu-pon-info
【Command】
show onu-pon-info
【Mode】
ONUMode
【Command】
【Mode】
All Mode
201 / 286
【Parameter】
【Description】
show onu-pon-info mac-address MAC-ADDR // PON port information display mac Address as
"MAC-ADDR" of the ONU
show onu-pon-info interface ONU-ID // PON port information display onu id is "ONU-ID" of the ONU
16.2.2show onu-pon-optical
【Command】
show onu-pon-optical
【Mode】
ONUMode
【Command】
202 / 286
【Mode】
All Mode
【Parameter】
【Description】
show onu-pon-optical // Displays the current ONU of PON port optical transmission properties
(the received optical power, light power, bias current, current, temperature)
show onu-pon-optical interface ONU-ID // Display onu id as "ONU-ID" of the ONU PON port optical
transmission properties (the received optical power, light power, bias current, current, temperature)
【Example】
203 / 286
16.3 Capacity
16.3.1onu-fec
【Command】
no onu-fec
【Mode】
ONUMode
【Parameter】
none
【Description】
【Example】
//enable
16.3.2show onu-fec
【Command】
show onu-fec
【Mode】
204 / 286
ONUMode
【Command】
【Mode】
All Mode
【Parameter】
【Description】
show onu-fec mac-address MAC-ADDR // FEC status display mac Address as "MAC-ADDR" of the
ONU
show onu-fec interface ONU-ID // FEC status display onu id is "ONT-ID" of the ONU
【Example】
205 / 286
16.3.3show onu-capability
【Command】
show onu-capability
【Mode】
ONUMode
【Command】
【Mode】
All Mode
【Parameter】
【Description】
show onu-capability // The ability to display the current capacity of the ONU (GE number, GE bit
diagram, FE number, FE bit map, the number of columns on the uplink, uplink port maximum number of
queues, downstream of the number of columns, the maximum number of downstream port queue, FEC
enabled, encryption Mode key replacement time)
show onu-capability mac-address MAC-ADDR // ONU capacity display capability (GE number mac
Address as "MAC-ADDR" is, GE bit diagram, FE number, FE bit map, the number of columns on the uplink,
uplink port maximum number of queues, the maximum number of columns downlink, downlink port queue ,
FEC enabled, encryption Mode, key replacement time)
206 / 286
show onu-capability interface ONU-ID // ONU capacity display capability (GE number, GE bit
diagram, FE number, FE bit map, the number of columns on the uplink, uplink port maximum number of
queues, a downlink onu id is "PON-ID" the maximum number of columns, downlink port queue , FEC
enabled, encryption Mode, key replacement time)
【Example】
16.4 sla
16.4.1onu-sla
【command】
【mode】
ONU mode
【Parameter】
207 / 286
Parameter Name Format Value Example
(pir≥cir≥fir)
【Description】
onu-sla pir PIR-BANDWITCH cir CIR-BANDWITCH fir FIR-BANDWITCH // Configuring the ONU
PON port uplink peak, guaranteed fixed bandwidth
onu-sla pir PIR-BANDWITCH // Configuring the ONU PON port uplink peak bandwidth
onu-sla cir CIR-BANDWITCH // Configuring the ONU PON port Upstream Guaranteed bandwidth
value
onu-sla fir FIR-BANDWITCH // Configuring the ONU PON port upstream fixed bandwidth
no onu-sla // Configuration "ONU of PON port uplink peak, guaranteed fixed bandwidth" is the default
value
no onu-sla pir // Configuration "PON ONU port uplink peak bandwidth value" as the default value
no onu-sla cir // Configuration "ONU of PON port Upstream Guaranteed bandwidth value" is the
default value
no onu-sla fir // Configuration "ONU PON port upstream of the fixed bandwidth value" is the default
value
208 / 286
【Example】
16.4.2show onu-sla
【command】
show onu-sla
【mode】
ONU mode
【command】
【mode】
all mode
【Parameter】
209 / 286
Parameter Name Format Value Example
【Description】
show onu-sla // Displays the current IP configuration of the upstream and downstream traffic
show onu-sla mac-address MAC-ADDR // Show mac Address configured for upstream and
downstream traffic "MAC-ADDR" of the ONU
show onu-sla interface ONU-ID // Display onu id configured for upstream and downstream traffic
"ONU-ID" of the ONU
16.5.1onu-description
【command】
onu-description ONU-NAME
no onu-description
【mode】
210 / 286
ONU mode
【Parameter】
【Description】
【Example】
16.5.2onu-ip
【command】
no onu-ip
【mode】
ONU mode
【Parameter】
211 / 286
Parameter Name Format Value Example
【Description】
onu-ip static address IP-ADDR // Configure ONU ipAddress static Mode, and set IPAddress
onu-ip static address IP-ADDR netmask IP-MASK // Configure ONU ipAddress static Mode, and set
the IPAddress and mask
onu-ip static gate-way IP-GATEWAY // Configure ONU ipAddress static Mode, and set the IP
Gateway
【Example】
16.5.3onu-admin-status
【command】
onu-admin-status { up | down }
212 / 286
no onu-admin-status
【mode】
ONU mode
【parameters】
none
【Description】
【Example】
16.5.4onu-cvlan
【command】
onu-cvlan VLAN-ID
no onu-cvlan
【mode】
ONU mode
【Parameter】
213 / 286
Parameter Name Format Value Example
【Description】
【Example】
16.5.5onu-svlan
【command】
onu-svlan VLAN-ID
no onu-svlan
【mode】
ONU mode
【Parameter】
【Description】
214 / 286
no onu-svlan // Configuration "ONU management svlan" is the default value
【Example】
16.5.6onu-admin-priority
【command】
onu-admin-priority ADMIN-PRIORITY
no onu-admin-priority
【mode】
ONU mode
【Parameter】
【Description】
【Example】
215 / 286
16.5.7show onu-dev-info
【command】
show onu-dev-info
【mode】
ONU mode
【command】
【mode】
all mode
【Parameter】
【Description】
【Example】
216 / 286
//ONU information display
16.6.1onu-bind
【command】
onu-bind MAC-ADDR
no onu-bind MAC-ADDR
【mode】
PON mode
【Parameter】
217 / 286
Parameter Name Format Value Example
【Description】
【Example】
16.6.2onu-registration-method mode
【command】
no onu-registration-method mode
【Mode】
【Parameter】
218 / 286
【Description】
onu-registration-method mode white // Security policy configuration ONU white list Mode, namely
the list of entries allowed to register, the other refused to register
onu-registration-method mode black // Security policy configuration for ONU blacklist Mode, the list
of entries in the other refused to register, allowed to register
onu-registration-method mode disable // Close the security policy, all requests are allowed to
register
no onu-registration-method mode // Configure the "ONU security strategy" as the default state
【Example】
//Security policy configuration ONU white list Mode, namely the list of entries allowed to register, the
other refused to register
16.6.3onu-registration-method mac-list
【Command】
【Mode】
【Parameter】
219 / 286
Parameter Name Format Value Example
XX-XX-XX-XX-XX-XX
【Description】
onu-registration-method mac-list add MAC-ADDR // Strategy list add ONU (black and white by the
security policy, white list up to 128, the black list up to 32)
onu-registration-method mac-list delete MAC-ADDR // The list of strategies to remove ONU (black
and white by security policy set)onu-registration-method mac-list clear // The list of empty ONU
strategy
【Example】
//Strategy list add ONU (black and white by security policy set)
16.6.4onu-registration-method block
【Command】
【Mode】
【Parameter】
220 / 286
Parameter Name Format Value Example
XX-XX-XX-XX-XX-XX
【Description】
onu-registration-method block clear // According to the PON port clearance refused to register the
ONU list list
【Example】
//According to the PON port clearance refused to register the ONU list
16.6.5show onu-registration-method
【command】
【mode】
all mode
【Parameter】
221 / 286
Parameter Name Format Value Example
XX-XX-XX-XX-XX-XX
【Description】
show onu-registration-method mac-list PORT-ID // ONU black and white list Mode and list
show onu-registration-method block // According to the authentication request has been rejected by
the ONU list
【Example】
16.7.1onu-classification
【command】
222 / 286
onu-classification precedence P-NUM queMapped QM-NUM ethernet-Priority EP-NUM
ACL-OPTION=VALUE [ACL-OPTION=VALUE……]
【Mode】
【Parameter】
【Description】
no onu-classification precedence P-NUM // Delete the ONU port flow classification rules
【Example】
223 / 286
16.7.2show onu-classification
【command】
【mode】
【Parameter】
【Description】
show onu-classification // ONU display all the ports in the classification of information flow
【Example】
224 / 286
16.8 ONU-PON Performance statistics
【command】
【mode】
ONU mode
【Description】
onu-pon statistics m15 enable // Open onu-pon port 15 minutes performance statistics
onu-pon statistics m15 disable // Close the onu-pon port of the 15 minute performance statistics
no onu-pon m15 statistics // Restore the onu-pon port 15 minutes performance statistics to the
default value
【Example】
【command】
225 / 286
onu-pon statistics h24 {enable | disable}
【mode】
ONU mode
【parameters】
none
【Description】
onu-pon statistics h24 enable // Open the 24 hour performance statistics onu-pon port
onu-pon statistics h24 disable // Close the 24 hour performance statistics onu-pon port
no onu-pon h24 statistics // Restore the "24 hour performance statistics" as the default onu-pon port
【Example】
【command】
【mode】
all mode
【Parameter】
226 / 286
Parameter Name Format Value Example
【Description】
show onu LLID pon statistics current // ONU displays the specified PON port current performance
statistics
show onu LLID pon statistics history // PON port historical performance statistics for the specified
ONU【Example】
【example】
227 / 286
16.9 ONU Port query
【command】
【mode】
ONU mode
【Parameter】
【Description】
show onu mac-address MAC-ADDR port // Query ONU ports to learn the MAC address of the port
information
【Example】
【command】
228 / 286
【mode】
ONU mode
【parameters】
none
【Description】
【Example】
//enable rstp
17.2
17.2.1uni admin-status
【command】
【mode】
ONU mode
【Parameter】
229 / 286
Parameter Name Format Value Example
【Description】
uni PORT-LIST admin-status up // Configure the UNI port management work for the state
uni PORT-LIST admin-status down // Configure the UNI port management state is closed
no uni PORT-LIST admin-status // Configure the UNI port management "is the default value
【Example】
【command】
【mode】
ONU mode
【Parameter】
230 / 286
Parameter Name Format Value Example
【Description】
uni PORT-LIST statistics m15 enable // Open UNI port 15 minutes performance statistics
uni PORT-LIST statistics h24 disable // Close the UNI port 24 hour performance statistics
no uni PORT-LIST m15 statistics // Set the UNI port 15 minutes performance statistics enable "as
the default state
【Example】
【command】
no uni isolation
【mode】
ONU mode
【parameters】
none
【Description】
231 / 286
uni isolation disable // Close the port isolation function of UNI
no uni isolation // Set the "port isolation function" UNI as the default state
【Example】
【command】
【mode】
Onu mode
【Parameter】
【Description】
uni PORT-LIST flow-control enable // The flow control function to open UNI port
uni PORT-LIST flow-control disable // The flow control function to close the UNI port
no uni PORT-LIST flow-control // Set the flow control function "UNI port for the default state
【Example】
232 / 286
17.2.5uni loopback-detect enable
【command】
【mode】
ONU mode
【Parameter】
【Description】
uni PORT-LIST loopback-detect enable // Open UNI port loop detection function
uni PORT-LIST loopback-detect disable // Closed loop detection function of UNI port
uni PORT-LIST private loopback-detect { enable | disable } // The Command loop detection
function to open or close the private UNI port
no uni PORT-LIST loopback-detect // Set the "loop detection function" UNI port for the default state
233 / 286
17.2.6uni auto-negotiation enable
【command】
【mode】
ONU mode
【Parameter】
【Description】
uni PORT-LIST auto-negotiation enable // The adaptive function of open UNI port
uni PORT-LIST auto-negotiation disable // Close the adaptive function of UNI port
no uni PORT-LIST auto-negotiation // Set the "adaptive" UNI port for the default state【Example】
【command】
234 / 286
uni PORT-LIST auto-negotiation reset
【mode】
ONU mode
【Parameter】
【Description】
【Example】
// Restart auto-negotiation
【command】
【mode】
ONU mode
【command】
【mode】
235 / 286
all mode
【Parameter】
【Description】
show uni attribute // Show all UNI port properties of the current onu
show uni PORT-LIST attribute // Onu current display attributes of a UNI port
show onu LLID uni attribute // Displays the onu all UNI port properties
show onu LLID uni PORT-LIST attribute // Display an attribute specified UNI port of onu
【Example】
236 / 286
17.3 MAC Learning
【command】
【mode】
ONU mode
【Parameter】
AGING-TIME mac address learning table Integer , Unit 0, [1, 458] 100
aging time second
【Description】
onu mac-address-table aging-time 0 // Configuring onu mac address learning table aging
onu mac-address-table aging-time AGING-TIME // Configuring onu mac address learning table
aging time
no onu mac-address-table aging-time // Configuring onu mac address learning table aging time to
the default value
【Example】
237 / 286
17.3.2Speed limit
【command】
【mode】
ONU mode
【Parameter】
【Description】
uni PORT-LIST rate-limit rx enable // Open the UNI port ingress rate limit
uni PORT-LIST rate-limit tx enable // Open the UNI port rate limit exports
uni PORT-LIST rate-limit both enable // Open the UNI port bidirectional speed function
uni PORT-LIST rate-limit rx disable // Close UNI port ingress rate limit
uni PORT-LIST rate-limit tx disable // Close UNI port rate limit exports
uni PORT-LIST rate-limit both disable // Close UNI port bidirectional speed function
no uni PORT-LIST rate-limit rx // Configure "UNI port ingress rate limit switch" is the default value
no uni PORT-LIST rate-limit tx // Configure "UNI port export limit switch function" is the default value
no uni PORT-LIST rate-limit both // Configure "UNI bidirectional port rate limit switch" is the default
value
【Example】
238 / 286
//Open the UNI port ingress rate limit
【command】
【mode】
ONU mode
【Parameter】
【Description】
【Example】
239 / 286
17.3.5uni rate-limit tx cir pir
【command】
【mode】
ONU mode
【Parameter】
【Description】
uni PORT-LIST rate-limit tx cir CIR-BANDWITCH pir CIR-BANDWITCH // UNI Port Configuration
export orientation peak bandwidth, guaranteed bandwidth
【Example】
//The peak bandwidth, configure the UNI port exit direction of the guaranteed bandwidth
240 / 286
17.3.6show onu uni rate-limit
【command】
【mode】
ONU mode
【command】
【mode】
all mode
【Parameter】
【Description】
show uni rate-limit // Displays the current ONU all UNI port entrance direction limit configuration
information (open, closed, 4 speed indicator)
show uni [ PORT-LIST ] rate-limit // Displays the current ONU a (some) speed limit configuration
information for the UNI port entrance direction (open, closed, 4 speed indicator)
show onu LLID uni rate-limit // Displays the specified ONU all UNI port entrance direction limit
configuration information (open, closed, 4 speed indicator)
show onu LLID uni [ PORT-LIST ] rate-limit // Displays a ONU (some) speed limit configuration
information for the UNI port entrance direction (open, closed, 4 speed indicator)
241 / 286
【Example】
17.3.8uni storm-control
【command】
【mode】
ONU mode
【Parameter】
242 / 286
Parameter Name Format Value Example
b: Radio
【Description】
【Example】
【command】
【mode】
ONU mode
【command】
243 / 286
【mode】
all mode
【Parameter】
【Description】
show uni PORT-LIST storm-control // Displays the current ONU UNI port broadcast storm control
information (open, closed, storm type, import / export rate)
show onu LLID uni PORT-LIST storm-control // Displays the specified ONU UNI port broadcast
storm control information (open, closed, storm type, import / export rate)
【Example】
17.3.10 Statistics
【command】
244 / 286
【mode】
ONU mode
【command】
【mode】
all mode
【Parameter】
LLID ONU LLID 号 Slot number / port number:LLID [1, 64] 1/2:1
【Description】
show uni PORT-LIST statistics current // Current performance statistics show the current UNI ONU
port
show uni PORT-LIST statistics history // Historical performance statistics show UNI port of the
current ONU
show onu LLID uni PORT-LIST statistics current // Displays the current performance statistics of
the ONU UNI port
show onu LLID uni PORT-LIST statistics history // Display historical performance statistics
specified UNI port of the ONU
【Example】
245 / 286
17.4 UNI VLAN config
【command】
【mode】
ONU mode
【Parameter】
246 / 286
Parameter Name Format Value Example
【Description】
uni PORT-LIST vlan port pvid PV-ID // Port default configuration uni vlan id
no uni PORT-LIST vlan port pvid // The "uni port vlan id" return to the default value
【Example】
【command】
【mode】
ONU mode
247 / 286
【Parameter】
【Description】
uni PORT-LIST vlan port tpid TPID // Remote configure onu UNI port vlan tpid
no uni PORT-LIST vlan port tpid // The uni port cvlan TPID restore defaults
【Example】
248 / 286
17.4.3uni vlan port mode
【command】
【mode】
ONU mode
【Parameter】
【Description】
uni PORT-LIST vlan port mode transparent // Remote configuration ONU UNI port for vlanMode
transmission
uni PORT-LIST vlan port mode tag // Remote configuration ONU UNI port vlanMode tag
uni PORT-LIST vlan port mode tag pvid PV-ID // Remote configuration of ONU UNI port vlanMode
to tag, and configure the default ID port VLAN
no uni PORT-LIST vlan port mode // The ONU UNI port VLAN Mode restore defaults.【Example】
249 / 286
17.4.4uni vlan port priority
【command】
250 / 286
【mode】
ONU mode
【Parameter】
【Description】
uni PORT-LIST vlan port priority VLAN-PRIORITY // VLAN uni port priority configuration no uni
PORT-LIST vlan port priority // Will the VLAN priority "uni port restore defaults
【command】
251 / 286
uni PORT-LIST vlan port aggregation {add OLD-VLAN-LIST A-VLAN-ID | delete VLAN-LIST}
【mode】
ONU mode
【Parameter】
【Description】
uni PORT-LIST vlan port aggregation add OLD-VLAN-LIST A-VLAN-ID // The polymerization of
VLAN (N:1) Mode, add VLAN ID conversion
uni PORT-LIST vlan port aggregation delete VLAN-LIST // The polymerization of VLAN (N:1) Mode,
VLAN ID conversion delete
uni PORT-LIST vlan port aggregation clear // The polymerization of VLAN (N:1) Mode, the
relationship between conversion to remove all VLAN configuration data
【Example】
252 / 286
//Add VLAN ID VLAN conversion polymerization Mode
【command】
uni PORT-LIST vlan port translation {add OLD-VLAN-ID NEW-VLAN-ID | delete OLD-VLAN-LIST}
【mode】
ONU mode
【Parameter】
253 / 286
Parameter Name Format Value Example
【Description】
uni PORT-LIST vlan port translation add OLD-VLAN-ID NEW-VLAN-ID //vlan translation(1:1)
Mode,add vlan id relation
uni PORT-LIST vlan port translation delete OLD-VLAN-LIST //vlan translate(1:1)Mode 下,delete
vlan id relation
uni PORT-LIST vlan port translation clear //vlant ranslate(1:1)Mode,delete all vlan conversion
between the configuration data
【Example】
【command】
254 / 286
uni PORT-LIST vlan port trunk {add TRUNK-VLAN-LIST | delete TRUNK-VLAN-LIST }
【mode】
ONU mode
【Parameter】
【Description】
uni PORT-LIST vlan port trunk add TRUNK-VLAN-LIST //vlan trunkMode,add TRUNK-VLAN-LIST
uni PORT-LIST vlan port trunk delete TRUNK-VLAN-LIST // vlan trunkMode ,delete
TRUNK-VLAN-LIST
uni PORT-LIST vlan port trunk clear // vlan trunkMode,delete all trunk list Configuration data
【Example】
255 / 286
17.5 uni onu-classification
【command】
【Mode】
【Parameter】
【Description】
no uni PORT-LIST onu-classification precedence P-NUM // Delete the ONU UNI port flow
256 / 286
classification rules
【Example】
17.6 Alarm
【Command】
no snmp trap
【Mode】
【Description】
snmp trap enable // The alarm switch to open the specified OLT total
snmp trap disable // Close the specified OLT alarm master switch
no snmp trap // OLT alarm set master switch to the default values
【Example】
257 / 286
17.7.2snmp enable trap
【Command】
【Mode】
【Parameter】
258 / 286
Parameter Name Format Value Example
【Description】
snmp enable trap WARNING-NO // Open WARNING-NO specify a particular type of alarm
snmp disable trap WARNING-NO // Close WARNING-NO specify a particular type of alarm
259 / 286
no snmp enable trap WARNING-NO // Settings "WARNING-NO assigned a specific type of alarm
switch" is the default value
【Example】
【Command】
【Mode】
【Parameter】
260 / 286
【Description】
no snmp ALARM-ID threshold trap // Settings "WARNING-NO designated specific type alarms" of
the threshold to the default value
【Example】
【Command】
【Mode】
【Parameter】
【Description】
261 / 286
snmp trap llid max MAXIMUM // More limited set LLID mismatch alarm threshold (PTC88C not
support the Command)
no snmp trap llid max // Settings "LLID mismatch over limit alarm threshold" is the default value
(PTC88C not support the Command)
【Example】
【Command】
【Mode】
【Parameter】
【Description】
【Example】
262 / 286
//Setting alarm times
【Command】
【Mode】
【Parameter】
【Description】
snmp trap interval INTERVAL // Set the number of seconds between alert
no snmp trap interval // Recovery "Alarm Interval Seconds" is the default value
【Example】
263 / 286
17.7.7show snmp
【Command】
【Mode】
All mode
【Description】
【Example】
【Command】
【Mode】
All mode
264 / 286
【Description】
show snmp trap count // The number of alarm information display OLT
show snmp trap interval // OLT display alarm time interval information
【Example】
【command】
【mode】
all mode
【parameters】
none
【description】
show snmp threshold trap // OLT display alarm threshold configuration information management
【example】
265 / 286
//OLT display alarm threshold configuration information
【command】
【Mode】
All Mode
【Parameter】
【Description】
show onu alarm // The current alarm information display all ONU
show onu LLID alarm // ONU display current alarm information specified
【Example】
266 / 286
//The current alarm information display
17.8.2show onu-alarm-id
【Command】
【Mode】
ALL Mode
【Description】
show onu-alarm-id pon// Discover onu pon port alarm ALARM-ID specific information Description
show onu-alarm-id uni// Discover onu uni port alarm ALARM-ID specific information Description
【Example】
267 / 286
17.8.3onu-alarm enable
【command】
【mode】
ONU 配置 mode
【Parameter】
【Description】
onu-alarm ALARM-ID enable // Open onu ALARM-ID to specify the type of alarm
onu-alarm ALARM-ID disable // Close onu ALARM-ID to specify the type of alarm
onu-alarm ALARM-ID pon enable // Open onu pon port ALARM-ID specified type alarm
onu-alarm ALARM-ID pon disable // Close onu pon port ALARM-ID specified type alarm
onu-alarm ALARM-ID uni PORT-LIST enable // Open onu uni port ALARM-ID specified type alarm
onu-alarm ALARM-ID uni PORT-LIST disable // Close onu uni port ALARM-ID specified type alarm
【Example】
268 / 286
17.8.4onu-alarm threshold
【command】
【mode】
ONU mode
【Parameter】
269 / 286
Parameter Name Format Value Example
【Description】
【Example】
270 / 286
17.8.5show onu alarm-config
【command】
【mode】
all mode
【Parameter】
0x0005:
BatteryVoltLow
0x0009:
ONUTempHighAlarm
0x000A:
ONUTempLowAlarm
PON:
0x0101:
RXPowerHigh Alarm
0x0102:
271 / 286
Parameter Name Format Value Example
RXPowerLow Alarm
0x0103:
TXPowerHighAlarm
0x0104:
TXPowerLowAlarm
0x0105:
TXBiasHighAlarm
0x0106:
TXBiasLowAlarm
0x0107:
VccHighAlarm
0x0108:
VccLowAlarm
0x0109:
TempHighAlarm
0x010A:
TempLowAlarm
0x010B:
RXPowerHighWarning
0x010C:
RXPowerLowWarning
0x010D:
272 / 286
Parameter Name Format Value Example
TXPowerHighWarning
0x010E:
TXPowerLowWarning
0x010F:
TXBiasHighWarning
0x0110:
TXBiasLowWarning
0x0111:
VccHighWarning
0x0112:
VccLowWarning
0x0113:
TempHighWarning
0x0114:
TempLowWarning
0x0115:
DownstreamDropEventsAlarm
0x0116:
UpstreamDropEventsAlarm
0x0117:
DownstreamCRCErrorFramesAlarm
0x0118:
273 / 286
Parameter Name Format Value Example
DownstreamUndersizeFramesAlarm
0x0119:
UpstreamUndersizeFramesAlarm
0x011A:
DownstreamOversizeFramesAlarm
0x011B:
UpstreamOversizeFramesAlarm
0x011C:
DownstreamFragmentsAlarm
0x011D:
DownstreamJabbersAlarm
0x011E:
DownstreamCollisionsAlarm
0x011F:
DownstreamDiscardFramesAlarm
0x0120:
UpstreamDiscardFramesAlarm
0x0121:
DownstreamErrorFramesAlarm
0x0122:
DownstreamDropEventsWarning
0x0123:
274 / 286
Parameter Name Format Value Example
UpstreamDropEventsWarning
0x0124:
DownstreamCRCErrorFramesWarning
0x0125:
DownstreamUndersizeFramesWarning
0x0126:
UpstreamUndersizeFramesWarning
0x0127:
DownstreamOversizeFramesWarning
0x0128:
UpstreamOversizeFramesWarning
0x0129:
DownstreamFragmentsWarning
0x012A:
DownstreamJabbersWarning
0x012B:
DownstreamCollisionsWarning
0x012C:
DownstreamDiscardFramesWarning
0x012D:
UpstreamDiscardFramesWarning
0x012E:
275 / 286
Parameter Name Format Value Example
DownstreamErrorFramesWarning
UNI:
0x0301:
EthPortAutoNegFailure
0x0302:
EthPortLOS
0x0303:
EthPortFailure
0x0304:
EthPortLoopback
0x0305:
EthPortCongestion
0x0306:
DownstreamDropEventsAlarm
0x0307:
UpstreamDropEventsAlarm
0x0308:
DownstreamCRCErrorFramesAlarm
0x0309:
DownstreamUndersizeFramesAlarm
0x030A:
UpstreamUndersizeFramesAlarm
276 / 286
Parameter Name Format Value Example
0x030B:
DownstreamOversizeFramesAlarm
0x030C:
UpstreamOversizeFramesAlarm
0x030D:
DownstreamFragmentsAlarm
0x030E:
DownstreamJabbersAlarm
0x030F:
DownstreamCollisionsAlarm
0x0310:
DownstreamDiscardFramesAlarm
0x0311:
UpstreamDiscardFramesAlarm
0x0312:
DownstreamErrorFramesAlarm
0x0313:
StatusChangeTimesAlarm
0x0314:
DownstreamDropEventsWarning
0x0315:
UpstreamDropEventsWarning
277 / 286
Parameter Name Format Value Example
0x0316:
DownstreamCRCErrorFramesWarning
0x0317:
DownstreamUndersizeFramesWarning
0x0318:
UpstreamUndersizeFramesWarning
0x0319:
DownstreamOversizeFramesWarning
0x031A:
UpstreamOversizeFramesWarning
0x031B:
DownstreamFragmentsWarning
0x031C:
DownstreamJabbersWarning
0x031D:
DownstreamCollisionsWarning
0x031E:
DownstreamDiscardFramesWarning
0x031F:
UpstreamDiscardFramesWarning
0x0320:
DownstreamErrorFramesWarning
278 / 286
Parameter Name Format Value Example
0x0321:
StatusChangeTimesWarning
【Description】
show onu LLID alarm-config ALARM-ID // display ONU alarm configuration information
show onu LLID pon alarm-config ALARM-ID // display the ONU pon port alarm configuration
information
show onu LLID uni PORT-LIST alarm-config ALARM-ID // display ONU UNI port alarm configuration
information
18 SNMP configure
18.1 snmp-server configure
18.1.1snmp-server community
【command】
279 / 286
snmp-server community COMMUNITY {ro | rw}
【mode】
【Parameter】
【Description】
【Example】
//Configure SNMP server community name ktkt, permissions to read and write
18.1.2snmp-server host
【command】
280 / 286
snmp-server host { HOST-ADDR | HOST-ADDR COMMUNITY udp-port PORT }
【mode】
【Parameter】
【Description】
snmp-server host HOST-ADDR COMMUNITY udp-port PORT // Configuring NTP server IP, the
community name and destination host port number
【Example】
281 / 286
18.1.3show snmp-server
【Command】
【Mode】
All Mode
【Description】
show snmp-server community // Displays the SNMP community name list server
【Example】
19 BCMP configure
19.1 Bcmp configure
19.1.1bcmp state
【command】
no bcmp state
【mode】
282 / 286
global configuration mode
【parameters】
none
【Description】
【Example】//enable BCMP
19.1.2bcmp vlan
【Command】
no bcmp vlan
【Mode】
【Parameter】
【Description】
283 / 286
no bcmp vlan // Recovery "BCMP the vlan id" is the default value
【Example】
19.1.3bcmp server
【Command】
【Mode】
【Parameter】
【Description】
bcmp server port PROT-ID // Configuring the BMC server port number
no bcmp server ip // Recovery "BCMP the server ip address" is the default value
no bcmp server port // Recovery "BMCP the server port number" is the default value
【Example】
284 / 286
//BCMP server ip
19.1.4bcmp proxy
【command】
【mode】
【Parameter】
【Description】
bcmp proxy ip IP-ADDR IP-MASK // Configure BCMP proxy IP address, subnet mask
bcmp proxy ip IP-ADDR IP-MASK IP-GATEWAY // Configure BCMP proxy IP address, subnet mask,
and IP gateway
285 / 286
bcmp proxy port PROT-ID // Configure the proxy port number BCMP
no bcmp proxy ip // Recovery "IP address BCMP agents, mask and gateway" is the default value
no bcmp proxy port // Recovery "BCMP proxy port number" is the default value
【Example】
19.1.5show bcmp
【command】
【mode】
all mode
【parameters】
none
【description】
286 / 286