Professional Documents
Culture Documents
Mobil Rust PRV Bulletin
Mobil Rust PRV Bulletin
Rust Preventives
Grades Typical Physical and Chemical Characteristics
Mobilarma – 500 Series 522 30.2 -23 (-10) 182 (360) 141 27 —
A series of high-grade hydraulic SAE 10W
and/or lubricating oils containing
rust preventive additives. They are 524 27.5 -18 (0) 218 (425) 461 88 —
formulated as run-in oils for SAE 30W
enclosed assemblies such as
engines, compressors, pumps, gear
525 27.7 -35 (-31) 198 (390) 278 53.5 —
sets, etc. They also can be used as
SAE 10-20W
high-quality, short-term lubricants.
Protection Inside
Areas of Application Key Benefits How to Apply How to Remove Storage (Months)
Finely finished parts between Highly effective water displacement Spray, brush, rolling, or dip. Dip in kerosene or solvent. 3–6
machining operations and prior resistance to fingerprints, corrosion,
to packaging of parts for storage. and etching.
Indoor storage and Contains water displacement and Dip, slush, or spray. Dip or rinse in kerosene, solvent, 12+
inter-operational slushing. fingerprint neutralizing additives. or caustic bath.
Provides a soft, waxy film.
Indoor or outdoor protection under Heaviest of the 200 Series. Dip, slush, or spray. Dip or rinse in kerosene, solvent, 12+
cover for inter-operational slushing. Leaves a heavy, non-drying film. or caustic bath.
A series of oils for run-in, Excellent rust and corrosion Install for run-in, testing Drain when needed. Flushing is 3–6
calibration testing, wet sump protection. Effective anti-oxidation adjustment, and rust prevention. required only where drainage is
initial fill, and seasonal lay-up characteristics with detergent Flushing with regular lube oil poor, or where the rust preventive
of diesel and petroleum engines, engine oil performance. not required. material must be completely
air tools, compressors, gear Easy to use. removed; such as in air
cases, hydraulic pumps, etc. compressors or steam turbines.
Long-term protection of cold-rolled Protection for periods of up to 12 months Can be uniformly sprayed at Use petroleum solvent, emulsion, 12
sheet stock, strip steel, and coils, or longer. Maintains uniform coverage high-rolling speeds. or alkaline cleaner. (Exterior)
particularly when stored outdoors under extreme tension. Non-sticky, will
or near pickle lines. not attract dirt or cause staining.
Wire rope protection. Lubricates and protects against rust. Swab or brush. Petroleum solvent. 6 – 12
Protection for all types of Excellent thin film, vapor and Install for run-in or Drain when needed. 3–6
equipment during test, run-in liquid phase long term rust normal operation.
prior to storage, shipment, or prevention. Superior oxidation
intermittently used machinery. stability and demulsibility. Wide Protection is improved if
range of application. unit is sealed.
Rust
What is Rust?
Rust is a specific type of corrosion that occurs on
Benefits of a Rust Prevention Program
Rusting costs industry several billions of dollars annually.
iron and steel surfaces when both water and oxygen In many plants, a rust prevention program can:
are present. Decrease Downtime
Rusting can occur even if the amount of water present Increase Production
is only a very thin film that may not even be visible. In Reduce Wasted Production
fact, rusting of iron and steel in humid atmospheres is Reduce Maintenance Costs
a common experience. Since air, the normal source of Extend Equipment Life
oxygen, usually contains some moisture, and ordinary
water contains dissolved air, the elements required for Rusting also creates:
rusting are practically always present. Corrosion of some Safety Hazards To Personnel
metals, for example copper and aluminum, results in the
This cost can be greatly reduced through proper use of
formation of a tight oxide film that protects the surfaces
Mobilarma rust preventives.
from further corrosion. On the other hand, rust on iron or
steel is porous so that water and oxygen can still get at
the underlying surface. Therefore, rusting continues and
penetrates deeper into the metal.
Prevention
For more information, call the Mobil Customer Response Center at 1-800-662-4525
or visit our website www.exxon.mobil.com/mobil_lubes/industrial.
In Canada, call 1-888-662-4582.
GMBR2000