Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DUMAGUIN, MIKE DEXTER G.

2019-101289
FPPE52L / ELEP02

FPPE52L
Activity 1

I. List all electricity-consuming appliances and devices that you use at home with their
corresponding rating:
Note: If you can’t find the actual rating of your device, you may assume using available
typical ratings online, but sources must be cited properly.

Total
Average No. of
kWh/month
Appliance/Device Quantity Rating in kW Hours Used per
(kW*hrs*30
day
days)
1 HP Refrigerator 1 0.746 24.0 537.12
0.6 Aircon 1 0.447 8.0 107.28
1 HP Aircon 1 0.746 8.0 179.04
Electrician 1 0.808 15.0 363.60
40 ‘’ Flat Screen TV 1 0.100 3.0 9.00
Flat Iron 1 1.000 1.0 30.00
Desktop Computer 1 0.200 20.0 120.00
Fluorescent Lamp 6 0.050 12.0 108.00
1 HP Washing
Machine 1 0.746 1.0 22.38
Washing Dryer 1 1.800 0.3 16.20
Water Heater 1 1.000 0.3 9.00
Wi-fi Router 1 0.01 24.00 7.20
Total Consumption: 1508.82
DUMAGUIN, MIKE DEXTER G.
2019-101289
FPPE52L / ELEP02

II. Find your latest Meralco bill and copy your consumption graph for the past 12 months as
shown at the bottom right of the bill, then get the average monthly consumption.

M o n th ly electr icity con su m p tion ch ar t


500
450
400
350
300
250
200
150
100
50
0
Au20 Se20 Oc20 No20 De20 Ja20 Fe21 Ma21 Ap21 My21 Ju21 Jl21 Au21

Average Monthly Consumption


76 kWh/month

III. Is there a discrepancy between your estimated consumption and your average actual
consumption? If yes, why do you think that is?

Yes, because discrepancy may cause due to fluctuations on my bill from month to
month. Estimated bills are based on the amount we used in the previous year as it can
then be seasonally adjusted. However, even if this is too high one month, the bill we
receive the following month will be lower to balance the higher cost. Similarly, if we are
undercharged, we will have to make up the difference when we receive an actual reading.

There are lots of varieties that may cause of discrepancy of my estimated bill to my
average actual consumption. Listed here are some examples:

• Increased consumption during ECQ


• High Heat Index and temperature that will increase consumption.

You might also like